LINDBYN Mirror
by IKEA
Important Information Regarding Wall Mounting
As wall materials vary significantly, screws and wall fixings (such as plugs) for attaching the LINDBYN mirror to the wall are not included in the package. For advice on suitable screw systems and fixings appropriate for your specific wall type, please consult your local specialized dealer or a qualified professional. IKEA does not supply wall-mounting hardware.
Assembly Instructions
Vertical Mounting
Prepare for mounting: Measure 33.7 cm (13 1/4 inches) down from the top edge of the desired mounting location. Mark this point on the wall. This will be the center for the top fixing point.
Visual Aid: A diagram shows a mirror, a tape measure, a spirit level, and a pencil, indicating the tools needed for accurate measurement and marking.
Install wall fixings: Insert appropriate screws and wall plugs (not included) into the wall at the marked positions. Ensure they are securely fastened. The diagram shows two screws with a toothed pattern, and a "STOP" symbol, indicating caution or a specific type of fastener is required.
Visual Aid: Diagrams illustrate inserting screws into wall fixings, with a "2x" notation indicating two fixings are needed. A "STOP" symbol is present, advising caution.
Hang the mirror: Carefully hang the mirror onto the installed wall fixings. Ensure the mirror is securely attached to the wall.
Visual Aid: A diagram shows the mirror being placed onto the wall fixings.
Horizontal Mounting
Prepare for mounting: Measure 67.5 cm (26 1/2 inches) between the desired mounting points on the wall. Mark these positions.
Visual Aid: A diagram shows a mirror in a horizontal orientation, with a tape measure indicating the distance between two points.
Install wall fixings: Insert appropriate screws and wall plugs (not included) into the wall at the marked positions. Ensure they are securely fastened. The diagram shows two screws with a toothed pattern, and a "STOP" symbol.
Visual Aid: Diagrams illustrate inserting screws into wall fixings, with a "2x" notation indicating two fixings are needed. A "STOP" symbol is present, advising caution.
Hang the mirror: Carefully hang the mirror onto the installed wall fixings. Ensure the mirror is securely attached to the wall.
Visual Aid: A diagram shows the mirror being placed onto the wall fixings.
Final Check
ℹ️ Check for levelness: Use a spirit level to ensure the mirror is perfectly horizontal or vertical as intended. Adjust the mirror's position if necessary and tighten the fixings to secure it firmly.
Visual Aid: A diagram shows a mirror being checked with a spirit level and then being tightened with a screwdriver.
