EDIFIER X5 Pro True Wireless Earbuds with Active Noise Cancellation
Model: EDF200136, IB-200-X0005P-00 V1.0
What's in the Box
- EDIFIER X5 Pro Earbuds [quantity 2]
- Charging Case [quantity 1]
- USB-C Charging Cable [quantity 1]
- Eartips [quantity 3 pairs]
- User Manual [quantity 1]
Power On/Off
Open or close the charging case to power the earbuds on or off.
First Pairing
1. Once powered on, the earbuds will automatically enter Bluetooth pairing mode.
2. Select "EDIFIER X5 Pro" in your device's Bluetooth settings to connect.
Pairing for a New Device
1. Place the earbuds in the charging case and keep the case open.
2. Press and hold the button on the case for [3 seconds] until the white and red LEDs blink.
3. Select "EDIFIER X5 Pro" in your device's Bluetooth settings to connect.
Note: For subsequent use, the earbuds will automatically connect to the last used device.
Charging
Input: 5V 200mA (Earbuds), 5V 1A (Charging Case)
⚠️ Note: Please do not charge the earbuds if there is sweat or other liquids inside the charging port, as this may damage the earbuds.
Controls
The earbuds feature touch controls. Tap the touch area on each earbud to perform actions.
- Double tap: Play/Pause music, Answer/End call.
- Triple tap: Switch between Noise Cancellation / Ambient Sound / Noise Cancellation Off. (Default sound control)
Images are for illustrative purposes only and may differ from the actual product.
Resetting the Earbuds
1. Place the earbuds in the charging case and keep it open.
2. Press the button on the case [3 times]. The white LED will blink until the reset is complete.
3. The earbuds will then automatically enter Bluetooth pairing mode.
Edifier ConneX App
[Scan to download Edifier ConneX App] for enhanced features and control.
Compliance Information
NCC
Equipment name: EDF200136
Unit Type designation: EDF200136
Restricted Substances and their Chemical Symbols
| Restricted Substance | Symbol | 0.1wt % | 0.01 wt % |
|---|---|---|---|
| Lead | (Pb) | ||
| Mercury | (Hg) | ||
| Cadmium | (Cd) | ||
| Hexavalent chromium | (Cr+6 ) | ||
| Polybrominated biphenyls | (PBB) | ||
| Polybrominated diphenyl ethers | (PBDE) |
Note 1: "Exceeding 0.1 wt %" and "exceeding 0.01 wt %" indicate that the percentage content of the restricted substance exceeds the reference percentage value of presence condition.
Note 2: " " indicates that the percentage content of the restricted substance does not exceed the percentage of reference value of presence.
Note 3: The "-" indicates that the restricted substance corresponds to the exemption.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC ID: Z9G-EDF222
IC Statement
CAN ICES-003(B) / NMB-003(B).
IC: 10004A-EDF222
EU Declaration
Frequency Band: 2400MHz - 2483.5MHz
RF Power Output: 13 dBm (EIRP)
There is no restriction of use.
Edifier International Limited declares that the radio equipment type EDF200136 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at: https://www.edifier.com/int/eu-doc.html
