Instruction Manual: WiFi Smart Power Plug
Description
This smart socket connects wirelessly to your home Wi-Fi network, enabling control of lights and other connected devices without a hub. It is compatible with the Tuya platform, allowing for brightness adjustments, fan control, scheduling, and integration into lighting scenes for creating ambiance.
Safety Information
Risk of Electric Shock: Electricity can cause personal injury and property damage if handled improperly. If you are unsure about any part of these instructions, please seek professional assistance from a qualified electrician.
Specifications
- Product Name: Smart Power Plug
- Working Voltage: AC100V-240V 50/60Hz
- Protocol: Wi-Fi 2.4G+Bluetooth
- Working Temperature: -10~65℃
- Rated Power (Resistive load): <200W
- Support system: Android / iOS
Preparation for Use
1. APP Download: Download the “Smart Life” application from your app store.
2. Register or Login: Enter the Register/Login interface. Tap “Register” to create an account using your phone number for a verification code and set a password. If you already have an account, choose “Log in”.
3. Configure the APP to the switch: Ensure the smart plug is connected to electricity. Your phone must be connected to Wi-Fi and the internet. Note: The plug only supports 2.4G Wi-Fi networks. Disconnect from any 5G networks before proceeding.
Scan the provided QR code or search for “Smart Life” on your app store to download the application.
Steps for Connecting the APP to the Device
Method One: QR Code Network Configuration
Ensure your Smart Life/Tuya Smart APP is successfully connected to Wi-Fi.
Method Two: General Setup
1. Ensure your phone is connected to Wi-Fi and Bluetooth is enabled.
2. Put the device into pairing mode: Turn the power button ON and OFF 6 times consecutively. On the 6th time, hold the button until the indicator light flashes rapidly, indicating it's ready for app configuration.
3. In the Smart Life/Tuya App, tap the “+” icon. The app should automatically display a prompt page; tap “Add”.
4. Enter your Wi-Fi password and tap “Next”. Wait for the connection to complete.
5. Once the device is added successfully, you can edit its name. Tap “Next” to proceed to the device page.
6. Tap “Done” to enter the device page and begin using your smart plug for home automation.
Equipment Operating Instructions
1. Resetting / Re-pairing Wi-Fi
EZ Mode: Turn the power button ON/OFF 6 times, holding it on the 6th time until the indicator light flashes rapidly for pairing or reset.
AP Mode: From EZ mode, turn the power button ON/OFF 6 times, holding it on the 6th time until the indicator light flashes slowly to enter AP mode.
2. Manual ON/OFF
Short press the on/off button to manually turn the device ON or OFF.
3. Manual Dimming
To dim a connected dimmable bulb, plug it into the smart power plug. Long press the on/off button to adjust brightness. Release the button when the desired light intensity is reached.
When the light is ON and at maximum brightness, long pressing the button will slowly dim it to the minimum. Release to stop dimming. When the light is ON but not at maximum brightness, long pressing will slowly increase the brightness to maximum.
Voice Control with Amazon Alexa
You can control your smart plug using voice commands via Amazon Alexa after linking your Smart Life account.
1. Configure Product Networking in the App
Complete the device's network configuration within the Smart Life app. It is recommended to rename the device in the app to something easily recognizable, like “bed light” or “living room lamp”.
2. Configure the Amazon Echo Device
If you have already set up Amazon Echo, you can skip this. These instructions are based on the iOS client:
- Ensure your Amazon Echo device is powered on and connected to Wi-Fi.
- Open and log in to the Alexa app on your phone.
- Tap the menu icon (☰) in the upper left corner of the Home page, select “Settings”, then tap “Set Up A New Device” to configure your Amazon Echo.
- Choose your Amazon Echo device type and language.
- Press and hold the small dot on the Echo device until the light ring turns yellow.
- Tap “Continue” to connect to the Amazon Echo hotspot, then return to the Alexa app.
- Tap “Continue” to find and connect your Echo device to your home Wi-Fi network.
- Amazon Echo will take a few minutes to connect. Once successful, tap “Continue”. An introductory video may play; tap “Continue” after it finishes to go to the Alexa Home page.
- Your Amazon Echo configuration is now complete.
3. Link Skill
- In the Alexa app, tap “Skills” in the menu.
- Search for the “Smart Life” skill and tap “Enable”.
- Enter your Smart Life app account credentials and tap “Link Now” to connect your accounts. The skill is now enabled.
4. Common Commands
Control your smart device with voice commands:
- “Alexa, turn on/off [device name].” (e.g., “Alexa, turn on bedroom light.”)
- “Alexa, set [device name] to 50 percent.” (Adjust brightness)
- “Alexa, brighten/dim [device name].” (Increase/decrease brightness)
FCC Compliance
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
NOTE: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC Statement: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The equipment complies with FCC Radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.
Service and Warranty
1. During the free warranty period, if the product malfunctions during normal use, free maintenance will be provided.
2. The warranty does not cover natural disasters, man-made equipment failures, unauthorized disassembly or repair, or products outside the free warranty period.
3. Any commitments made by third parties (dealers/service providers) beyond the warranty scope are the responsibility of those third parties.
4. Please retain this warranty card to protect your rights.
5. The company may update or change products without prior notice. Refer to the official website for updates.
Warranty Card
Product Information
| Product Name: | Smart Power Plug |
| Product Type: | |
| Purchase Date: | |
| Warranty Period: | |
| Dealer Information: | |
| Customer's Name: | |
| Customer Phone: | |
| Customer Address: |
Maintenance Records
| Failure date | Cause Of Issue | Fault Content | Principal |
|---|---|---|---|
Recycling Information
Products marked with the WEEE symbol [? symbol for separate collection of waste electrical and electronic equipment] must be disposed of separately from unsorted municipal waste. To protect health and the environment, this equipment must be taken to designated collection points for electrical and electronic equipment. Correct disposal and recycling help prevent negative environmental and health consequences. Contact your installer or local authority for information on collection points.
Multilingual Support
QR codes are provided to access manuals, installation videos, and feature introductions in German, Spanish, French, Russian, Portuguese, and Chinese.
