Pyle PWMA1080IBT

Wireless BT Portable PA Speaker System

Built-in Rechargeable Battery, iPod Dock, 800 Watt

Questions? Issues? We are here to help! Phone: (1) 718-535-1800 | Email: support@pyleusa.com

Introduction

We recommend that you read this manual carefully so that you can fully take advantage of the advanced and convenient functions of the Portable PA Speaker and Microphone System. We also recommend that you keep this manual in a safe and handy place for future reference.

Safety Instructions

CAUTION

WARNING! DON'T OPEN THE MACHINE TO AVOID ELECTRIC SHOCK, PLEASE ASK HELP FROM PROFESSIONAL TECHNICIANS.

RISK OF ELECTRIC SHOCK! DO NOT OPEN!

  1. Read this manual carefully before using. Retain for future reference.
  2. All warnings on the speaker and in the operating instructions should be adhered to.
  3. Do not use this apparatus near water.
  4. Do not block any of the ventilation openings. Install in accordance with the manufacturers instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Do not install the speaker in an airtight location.
  5. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
  6. Switch OFF and unplug then use a soft cloth to clean the exterior of the unit if it becomes dirty. If necessary, use a damp cloth that has been wrung out well to wipe it.
  7. Unplug this apparatus during lightning storms or when unused for long periods of time.
  8. Keep foreign objects and liquid from entering the unit to avoid a short circuit, fire and electrical accidents.
  9. Place the speaker in a dry location.
  10. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

System Overview

System Function Figure

The system features a comprehensive control panel and various input/output jacks. The front of the unit houses the main speaker components: a large 21. Woofer Speaker at the bottom, a 22. Tweeter at the top, and a 17. Mid Speaker in between. Ventilation openings (18, 20) are present on the sides, and a 19. Unit Fixed Stand is at the base.

The top control panel includes:

Component List:

  • 1. Wireless Mic/MIC 1 Volume Control
  • 2. MIC 2 Volume Control
  • 3. Guitar Volume Control
  • 4. Audio Volume Control
  • 5. iPod Dock
  • 6. iPod/MP3 Volume Control
  • 7. Echo Control
  • 8. Treble Control
  • 9. Bass Control
  • 10. Metal Corner
  • 11. Wireless BT ON/OFF switch
  • 12. Wireless BT indicator light
  • 13. Audio Output Jack
  • 14. iPod/MP3 Input Jack
  • 15. Audio Input Jack
  • 16. Guitar Input Jack
  • 17. Mid Speaker
  • 18. Vent Hole
  • 19. Unit Fixed Stand
  • 20. Vent Hole
  • 21. Woofer Speaker
  • 22. Tweeter
  • 23. MIC 2 Input Jack
  • 24. MIC 1 Input Jack
  • 25. Power Switch
  • 26. Power Indicator
  • 27. Low Voltage Indicator
  • 28. Charge Indicator
  • 29. Wireless Mic RF Indicator
  • 30. Trailer Handle
  • 31. Heating Pane
  • 32. Handle
  • 33. Audio Out
  • 34. Voltage Selector Switch
  • 35. AC Fuse/Battery Fuse
  • 36. Power line (-115V/230V)
  • 37. External DC Input Jack
  • 38. 2 PIN Power Socket
  • 39. Rechargeable Battery Cover
  • 40. Warning label
  • 41. 7AH/12V Rechargeable Battery
  • 42. Trailer Truckle
  • 43. Mic Head
  • 44. Handheld Mic RF Indicator
  • 45. Handheld Mic Power Switch
  • 46. Handheld Mic Battery Housing

Instructions

1. Confirm the Power

AC Power: Before operation, please confirm the voltage is the same as the specified voltage marked on the label. If not, the unit will be damaged.

Built-in Rechargeable Battery: Plug-in the AC power when the rechargeable battery voltage is enough, but use the battery directly. When the Low Voltage indicator turns yellow , it indicates the low battery; please charge it in time. When the Low Voltage indicator turns OFF , it indicates the voltage is standard now. If the unit will not be used for a long time, please charge the rechargeable battery every 2 months for 8-10 hours each time.

2. Operation Instructions

  • Plug the power cable into the socket and connect it with this amplifier system.
  • Switch ON the amplifier; the Power Indicator comes red.
  • During charging, the RECHARGE indicator turns red. When the indicator is flashing, it means the battery is almost full, and it turns OFF when fully charged.
  • During charging, you can play music at the same time; the RECHARGE indicator will flash with the current consumption, indicating the speed of charge. Charge time is in direct proportion to the volume of music. When the battery is full, the RECHARGE indicator will stop flashing and turn off.
  • Put two AA 1.5V batteries into the handheld microphone (bodypack transmitter), push the Power Switch to the middle; the Power Indicator will flash once, and the RF Indicator turns green.
  • Push the handheld microphone Power Switch (bodypack transmitter) to the ON position; your sound can be heard from the amplifier when speaking.
  • Adjust the Volume Control/Echo Control/Treble Control/Bass Control to a proper position to avoid feedback.
  • If the microphone Power Indicator (bodypack transmitter) turns on at all times, it indicates the low battery; please replace the battery.
  • Connect a guitar cable with the Guitar Input Jack on this system to play music.

3. Wired Microphone

  • Two-way wired microphone input jacks are supplied for two people to use simultaneously.
  • Plug wired microphones into the jacks separately. Adjust Echo Control to get better sound.
  • Adjust the volume of each microphone to make sure the sound is satisfactory.

Note: When you turn on the unit, be sure the ECHO control is set to low, or there will be sound distortion.

4. Wireless BT Playback

You can connect your Wireless BT phone or other device to the PA speaker.

  1. Turn ON the unit.
  2. Press the ON/OFF switch on the front panel to turn ON Wireless BT; the indicator light is lit.
  3. Use your Wireless BT phone or other device to search for the Wireless BT name "PYLE SPEAKER".
  4. Select the "PYLE SPEAKER" Wireless BT name and wait for the device to pair automatically.
  5. You do not need a code to get connected with the unit.
  6. Once paired, you can play music from your Wireless BT device.
  7. You can use the VOLUME/BASS/TREBLE controls to adjust the sound level for Wireless BT, and also adjust the Wireless BT music sound through your own phone or other device.

NOTES: Check the volume controller both on the unit and on your phone or other device if there is no sound through the PA speaker during Wireless BT playback.

What's in the Box

  • Portable PA Speaker
  • 1/4" to Aux (3.5mm) Audio Cable + Adapter
  • Battery Terminal Alligator Clamp Cables
  • RCA Connection Cable
  • Power Cable

System Features

  • Rugged & Compact Public Address Sound System
  • Built-in Rechargeable Battery & 30-Pin iPod Dock Connector
  • (2) 1/4" Microphone Inputs + (3) 1/4" Guitar/Instrument Inputs
  • Ability to Connect & Stream Audio From External Devices
  • Sound System: 10" Subwoofer, 4" Mid-Range + 4" Tweeter
  • Connect up to (3) Mics Simultaneously for a Karaoke Party
  • Ported Enclosure for Increased Bass Response
  • Independent Channel Volume Controls
  • Audio Configuration: Echo, Bass and Treble Controls
  • Telescoping Handle & Caster Wheels
  • 35mm Speaker Stand Mount
  • LED Indicator Lights
  • External 12V Power DC Input Connector
  • Perfect for Karaoke, Public Events, Crowd Control, etc.

Wireless BT Connectivity

  • Built-in Wireless BT Music Streaming
  • Works with All of Your Favorite Devices (iPhone, Android, Smartphone, iPad, Tablet, Computer, etc.)
  • Wireless BT Network Name: Pyle Speaker
  • Wireless BT Version: 3.0
  • Wireless BT Range: 100 Ft.

Technical Specifications

  • Max Power Output: 800 Watt
  • RMS Power Output: 400 Watt
  • VHF Band Signal System Transmission
  • System Battery Life: Approx. 8 Hours
  • Average Charging Time: 8 - 10 Hours
  • SPL: 94dB (1W/M)
  • T.H.D.: <1%
  • Power Supply: 120/220 Voltage Switchable
  • Dimensions (L x W x H): 12.2" x 10.2" x 22.3" -inches
Models: Wireless BT Portable PA Speaker System, PWMA1080IBT

File Info : application/pdf, 4 Pages, 694.51KB

PDF preview unavailable. Download the PDF instead.

PWMA1080IBT 6635f4aa-0ba3-41ed-8d38-2df20c88ede9

References

Adobe PDF library 10.01

Related Documents

Preview Pyle PPHP838B 8" Wireless BT Portable PA Speaker User Manual
User manual for the Pyle PPHP838B 8-inch portable PA and karaoke speaker. Features include Bluetooth, rechargeable battery, party lights, FM radio, USB MP3 playback, and 300W max power.
Preview Pyle PPHP82SM Wireless BT Streaming PA Speaker System User Manual
Comprehensive user manual for the Pyle PPHP82SM portable PA speaker system. Learn about features, controls, technical specifications, and troubleshooting for this 400W Bluetooth speaker with microphone, LED party lights, and FM radio.
Preview Pyle PPHP8MBA Wireless BT Streaming Portable PA Speaker System User Manual
Comprehensive user manual for the Pyle PPHP8MBA Wireless BT Streaming Portable PA Speaker System. This guide covers safety instructions, Bluetooth and charging procedures, control descriptions, system features, technical specifications, and what's included in the box.
Preview Pyle PPHP2694B & PPHP2894B Portable PA Speaker User Guide
User guide for Pyle PPHP2694B and PPHP2894B portable PA and karaoke party audio speakers. Includes setup, features, safety information, and remote control functions.
Preview Pyle PPHP1037UB User Manual: 700W 10-Inch Wireless BT PA Speaker System
Get detailed instructions and specifications for the Pyle PPHP1037UB, a powerful 700W 10-inch wireless Bluetooth PA speaker system with USB, SD, and FM radio capabilities. Learn about its features, controls, and safety guidelines.
Preview Pyle PKRK270BT Karaoke Vibe Portable Video PA Speaker System User Guide
Comprehensive user guide for the Pyle PKRK270BT Karaoke Vibe Portable Video PA Speaker System, detailing features, setup, operation, troubleshooting, and technical specifications. Includes information on disc playback, multimedia, Bluetooth connectivity, and more.
Preview Pyle PSBT65A Compact & Portable Wireless BT Streaming PA Speaker User Guide
Comprehensive user guide for the Pyle PSBT65A Compact & Portable Wireless Bluetooth Streaming PA Speaker. Covers features, technical specifications, setup, safety instructions, and troubleshooting for optimal use.
Preview Pyle Portable Bluetooth PA Speaker System User Manual
User manual for the Pyle Portable Bluetooth PA Speaker System, covering models PPHP842B, PPHP1042B, PPHP1242B, and PPHP1542B. Includes features, technical specifications, control board functions, remote control functions, TWS setup, and troubleshooting.