Pyle PPHP1037UB Wireless BT Loudspeaker PA Cabinet Speaker System

Introduction

This manual provides detailed information for the Pyle PPHP1037UB Wireless BT Loudspeaker PA Cabinet Speaker System. It is recommended to read this manual carefully to fully utilize the system's advanced functions and keep it for future reference.

For questions or issues, contact Pyle support: Phone: (1) 718-535-1800, Email: support@pyleusa.com. Visit PyleUSA.com for more information.

Safety Instructions

Important Warnings

⚠️ WARNING: Do not open the machine to avoid electric shock. Please ask help from professional technicians.

⚠️ CAUTION: RISK OF ELECTRIC SHOCK! DO NOT OPEN!

General Safety Guidelines

• Read this manual carefully before using and retain for future reference.
• Adhere to all warnings on the speaker and in the operating instructions.
• Do not use this apparatus near water.
• Do not block ventilation openings. Install according to manufacturer's instructions. Avoid heat sources like radiators, heat registers, stoves, or other heat-producing apparatus. Do not install in an airtight location.
• Protect the power cord from being walked on or pinched, especially at plugs and where it exits the apparatus.
• Switch OFF and unplug before cleaning. Use a soft, dry cloth. If necessary, use a slightly damp cloth that has been well wrung out.
• Unplug during lightning storms or when unused for extended periods.
• Keep foreign objects and liquids from entering the unit to prevent short circuits, fire, and electrical accidents.
• Place the speaker in a dry location.
• Refer all servicing to qualified service personnel. Servicing is required if the apparatus is damaged (e.g., power cord, plug), liquid has spilled, objects have fallen in, it has been exposed to rain or moisture, does not operate normally, or has been dropped.

Control & Layout

Front Panel Controls & Inputs

• 1. iPhone Input: 3.5mm connector for iPhone.
• 2. Balanced Microphone Input: Connector for a balanced microphone.
• 3. Microphone Input: 6.3mm connector for a microphone.
• 4. RCA Line-In: Connect external audio devices (CD, radio/DVD) with RCA connectors.
• 5. XLR Line-In: Connect external audio devices (CD, radio/DVD) with XLR connectors.
• 6. Signal Output: 6.35mm jack to connect an amplifier or another powered speaker cabinet using an XLR connector.
• 7/8. SD card / USB: Ports for SD card and USB flash drive.
• 9. MP3/iPhone Volume Control: Adjusts the volume level for MP3/iPhone sources.
• 10. Mic Volume Control: Adjusts the volume level for microphones.
• 11. Line-In Signal Volume Control: Adjusts the volume level for Line-In signals.
• 12. Volume Control: Master volume adjustment.
• 13. Treble: Adjusts the treble frequency response.
• 14. Bass: Adjusts the bass frequency response.
• 15. AC 110/220 Voltage Selectable: Switch to select input voltage.
• 16. On/Off Power Switch: Powers the speaker on or off.
• 17. AC Power: Connection for the AC power cord.
• 18. Fuse: Fuse holder.

Rear Panel / MP3 Control Panel

• MP3 CONTROL DIGITAL DISPLAY: Shows playback information.
• MODE: Press to change USB/SD/Wireless BT input sources.
• PLAY/PAUSE: Press to play or pause audio.
• REC: Press to record audio to USB/SD.
• REPT: Press to select repeat mode (one, all, random).
• PREV: Press to jump to the previous song.
• NEXT: Press to jump to the next song.
• B/TOOTH: Bluetooth indicator.
• USB/SD: Indicates USB/SD card activity.

Wireless BT Function Instruction

• Press 'MODE' to enable Wireless BT and connect to your device.
• When 'Bluetooth' appears on the LCD screen, it will read 'connected' or 'unconnected' based on your device's pairing status.
• Allow the speakers to search for Wireless BT connection.
• Once a Wireless BT connection is established with a paired device, the screen will prompt for a 4-digit pass code. Enter "0000" and agree to connect.
• The LCD screen will read 'connected' to confirm the Wireless BT connection has been established.

Record Function Instruction

Press the 'REC' button to record audio to your USB or SD memory cards. Ensure your selected memory device is inserted. You can record and delete audio files directly from the speaker's control center and LCD screen.

Remote Control Functions

• A. MODE: Changes input source (USB/SD/Wireless BT).
• B. PLAY: Plays or pauses songs.
• C. REC: Records to USB or SD.
• D. REPT: Selects repeat mode (one, all, random).
• E. PREV: Skips to the previous song.
• F. NEXT: Skips to the next song.

Cautions & Extra Functions

Cautions

Do not place the microphone against the speaker, as this can cause feedback echo and damage the system.

Extra Functions

The 6.3mm and XLR connectors marked as 'LINE OUT' can connect to an amplifier or another powered speaker cabinet. The speaker has a stand mount hole on the bottom.

Electrical Safety

All products are supplied with a detachable power cord that connects to the AC mains and the back panel of the loudspeaker. The cord has an IEC female connector on one end and male mains connectors on the other. This cord is designed to accommodate worldwide safety and electrical code requirements. The supplied power cord has a 3-pin plug; do not cut off or damage the grounding plug. Like any electrical appliance, these powered speakers should not be used in water or when wet.

Product design and specifications are subject to change without previous notice.

System Features

• Loudspeaker PA System
• Rugged, Durable & Reliable Sound
• Bluetooth Wireless Streaming Ability
• Speaker System: 10" Woofer, 1.0" Tweeter
• Compression Driver with Titanium Diaphragm
• 2-Way Full Range Audio Projection
• Built-in Amplifier
• Fully Featured 2-Channel Mixer
• Aux-In (3.5mm) Input Connector Jack
• RCA (L/R) Stereo Line Input Connectors
• Ability to Connect External Devices (Smartphones, MP3 Players, Tablets, etc.)
• USB Flash & SD Memory Card Readers
• USB Reader Doubles as Device Charging Port
• FM Radio
• Digital LCD Display Screen
• ID3 Tag Song Readout Info: LCD Displays Song Title/Song Time
• Touch Button & Rotary Controls
• Mic Level, Input Level & Volume Control
• Master Volume, Treble, and Bass Adjustable
• 1/4" Microphone Input
• 1/4" Line Output Connector Jack
• (2) XLR Input Connector Jacks for Microphone/Guitar
• Convenient Carry Handles
• 35mm Speaker Stand Mount
• Engineered Heavy Duty ABS Housing

Wireless BT Connectivity

• Instantly Stream Music from Your Wireless BT Devices
• Works with All of Your Favorite Devices (iPhone, Android, Smartphone, iPad, Tablet, Computer, etc.)
• Wireless BT Version: 2.1+EDR
• Wireless BT Wireless Range: 100'+ Feet
• Wireless BT Network Name: 'Pyle Speaker'

MP3 Audio Recording Ability

• Easy: One Button Record Activation
• Record Audio as Streamed through the Speaker System
• Ability to Record Vocals via Microphone
• Can Also Record Audio via Line & Aux Inputs
• Records to USB Flash & SD Memory Card
• Audio File Type Created: .WAV
• Easy Transfer to PC & Mac

Speaker Specifications

Subwoofer

• Size: 10"
• Material: Stamped Steel Basket
• Impedance: 8 Ohm
• Magnet: 40 oz.
• Voice Coil: 50mm, 2"
• Sensitivity: 96dB
• Frequency Response: 40Hz-22kHz

Tweeter

• Size: 1.0"
• Material: Titanium
• Impedance: 8 Ohm
• Sensitivity: 110dB
• Voice Coil: Kapton
• Frequency Response: 600Hz-20kHz

Technical Specs

• Max Power Output: 700 Watt
• RMS Power Output: 350 Watt
• Amplifier Class: AB
• Digital Audio File Compatibility: MP3, WMA
• Maximum SD/USB Flash Memory Support: 32GB
• 2 XLR and 2 1/4" TS/Unbalanced with RCA
• T.H.D.: 1%
• S/N Ratio: 72dB
• Crossover Frequency: 2.2kHz
• 110/220 Voltage Selectable
• Dimensions (L x W x H): 14.1" x 11.4" x 21.2"

What's in the Box

• 10" Wireless BT PA Speaker
• Remote Control
• Power Cable