Pyle PPHP2694B & PPHP2894B Portable PA Speaker User Guide

Warnings and Safety Information

FCC Compliance

WARNING

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

NOTE: This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter.

RF Exposure Statement

To maintain compliance with FCC's RF Exposure guidelines, this equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. This device and its antenna(s) must not be co-located or operated in conjunction with any other antenna or transmitter.

Important Safety Measures

Before using this machine, please read all the safety and operating instructions. Meanwhile, please observe all the indications about safe operating.

1. Protection of electric power supply line: Be aware that the electric power supply line is not trampled or pressed by heavy objects. Pay special attention to the plug of the power supply line and the outlet on the machine. DO NOT lengthen the electric shock protection, DO NOT pull or drag the power supply line.
2. Ventilation: This set must be put in a ventilated place. DO NOT put disks on it or cover it with cloth. The distance away from the wall should not be less than 10 centimeters. DO NOT put this set on the bed, sofa, carpet, or other objects with similar surfaces that might obstruct ventilation.
3. Casing Dismantling: DO NOT dismantle the casing. If one touches the inner components, they will probably get serious electric shock.
4. Unusual smell: When you discover an unusual smell and smoke, cut power supplies immediately and pull the plug from the outlet on the wall. Contact the shop or nearest repairing center.

Product Features

• High-Powered PA Loudspeaker
• Wireless Microphone for Home Karaoke Style Fun
• Bass & Treble Adjust Knobs
• Connect & Stream Audio from External Devices
• Wireless Music Streaming Ability
• Multi-Color Flashing LED Party Lights
• Aux (3.5mm) Input Connector Jack

What's in the Box:

• PA Speaker System
• Remote Control
• Power Adapter
• Wireless microphone

Unit Description and Remote Control

Unit Description

The unit features the following ports and controls:

• 1. POWER ON/OFF: Main power switch.
• 2. USB port: For USB media playback.
• 3. Micro SD port: For Micro SD card playback.
• 4. CHARGE: Indicator light for charging status.
• 5. DC 9V IN: DC 9V charging port.
• 6. AUX: AUX input for external audio sources.
• 7. MIC 1: Microphone input 1.
• 8. MIC 2: Microphone input 2.
• 9. LED. SW: Controls the LED party lights (ON/OFF).
• 10. MODE: Mode switch for BT, FM, AUX, USB, MicroSD.
• 11. MENU: Menu key to adjust treble, bass, microphone volume, and ECHO.
• 12. MIC. PRIORITY: Microphone priority function.
• 13. CH-: Previous song or channel selection.
• 14. SCAN: Play/stop function. Press and hold to auto-search FM channels. In BT mode, press and hold to turn on TWS (True Wireless Stereo).
• 15. CH+: Next song or channel selection.
• 16. VOL: Main volume knob.

Remote Control Functions

The remote control provides the following functions:

1. Power: Standby button.
2. MODE: Used to switch between BT, FM, AUX, USB, SD modes.
3. MUTE: Mute button.
4. REC: Recording function. Press once to start recording, press again to play the current recording.
5. VOL +: Main volume increase.
6. >>I: Next song/Next channel.
7. <<: Previous song/Previous channel.
8. >II: Play/Stop. Auto-search by pressing and holding the FM button. Press and hold the BT button to turn on TWS (True Wireless Stereo).
9. VOL -: Main volume decrease.
10. REPEAT: Single repeat or repeat all.
11. EQ: Choose from EQ1, EQ2, EQ3, EQ4 presets.
12. Number buttons (0-9): Choose song number directly or channel directly.

Getting Started and Connectivity

Getting Started

1. Ensure the Portable PA Speaker is turned off. Ensure all volume controls are turned all the way down. Next, connect one side of the included power cable to the Portable PA Speaker's power inlet and the other to a grounded power outlet.
2. Ensure that the power supply complies with the power requirements listed on the identification sticker located on the bottom of your product. Turn on the power to the Portable PA Speaker using the power switch.
3. Slowly turn up the function keys until the desired level is reached.

Wireless BT Connection

Switch the Portable PA Speaker to MODE, then switch to BT (BT MODE) pairing mode and connect to a new BT device using the BT Network Name: 'PYLE USA'.

Safety and Placement

Warning:

To prevent the risk of fire or electric shock, do not expose this appliance to rain or moisture. To prevent electric shock, do not remove the cover. No user-serviceable parts inside. Refer servicing to qualified service personnel.

Safety: Prior to connecting mains, ensure that the supply voltage is correct and the mains lead is in good condition. Avoid ingress of water or particles into the enclosure.

Placement: Keep the unit out of direct sunlight and away from heat sources. Place the unit in an upright position during use and storage. Keep the unit away from moisture or dusty environments.

Cleaning: Use a soft cloth with a neutral detergent to clean the cabinet, panel, and controls. To avoid damage, do not use solvents to clean this equipment.