Miele Fully Integrated Dishwasher Installation Guide with FrontFit and Knock2open
This guide provides essential instructions for installing Miele fully integrated dishwashers equipped with FrontFit and Knock2open technology into a kitchen unit. Please observe this installation sheet and read the operating instruction manual supplied with the appliance before installation and use to avoid accidents and damage.
Important Information and Warnings
⚠️ Risk of damage or fire hazard. Always follow safety guidelines.
ℹ️ Check connection data for your appliance before proceeding with installation.
➡️ Prepare for movement: Screw the feet in before moving the dishwasher to ensure stability.
⚠️ Tool safety: Do not use a cordless screwdriver, as it may cause damage to the appliance or surrounding components.
➡️ Door panel adjustment: After fitting the front panel to the dishwasher door, ensure the door springs are adjusted equally on both sides for proper operation.
⚠️ Cutting hazard: Be aware of potential cutting hazards during installation. Handle components with care.
ℹ️ Front panel weight: The minimum and maximum permissible weight for the front panel is detailed in the technical data for your specific Miele dishwasher model, available on the Miele website.
? Water drain venting: If the on-site drainage connection is situated lower than the guide path for the lower basket rollers in the open door, the drainage system must be vented. This prevents siphoning and ensures proper drainage.
Installation Overview and Components
This installation involves fitting the fully integrated dishwasher into a kitchen unit, integrating the front panel, and connecting utilities. The "FrontFit" function ensures a flush appearance with your cabinetry.
Included Fittings: A variety of screws and mounting hardware are supplied, depending on your specific Miele model. Refer to the diagram showing included parts.
Required Tools: Ensure you have the necessary tools for installation, as indicated in the provided diagrams. These may vary by model.
Optional Accessories: Additional accessories are available for purchase to enhance the functionality of your Miele dishwasher.
Step-by-Step Installation Process
Step 1: Unit Placement and Initial Setup
Position the Miele dishwasher unit within the designated kitchen cabinet space. Ensure the unit's dimensions are compatible with the cabinet opening. For standard units, heights typically range from 680-785 mm, while XXL models may require 720-825 mm. Adjust the appliance feet as needed for leveling and stability.
Step 2: Attaching Mounting Brackets and Rails
Securely attach various mounting brackets, plates, and rails to the kitchen cabinet structure. These components are essential for firmly fixing the dishwasher and supporting the front door panel. Follow the diagrams precisely for placement and screw types (e.g., M4x16, 4x15, 4x27) and quantities.
Step 3: Securing the Dishwasher to the Cabinet
Carefully align the dishwasher unit and secure it to the previously installed brackets and rails using the specified screws. Ensure the appliance is stable and correctly positioned within the cabinet.
Step 4: Installing the Front Door Panel (Knock2open Integration)
Attach the custom front door panel to the dishwasher's integrated hinges. This is a critical step for achieving the seamless "FrontFit" look and enabling the "Knock2open" function, which allows the door to open with a gentle knock. Ensure precise alignment and secure fastening of the panel.
Step 5: Connecting Water, Drain, and Electrical Utilities
Connect the water inlet hose to the household water supply (typically a 3/4" connection). Connect the drain hose to the household drainage system (ensure it meets the Ø22 mm requirement for the hose diameter). Connect the appliance's electrical cable to the power supply, adhering to all safety regulations and local codes.
Step 6: Final Adjustments and Securing
Gently slide the dishwasher into its final installed position. Secure the appliance to the kitchen unit using the designated mounting points to prevent movement. Perform final checks on all connections and ensure the appliance is level and stable. Pay attention to visual indicators (✔️ for success, ❌ for issues) in the diagrams for specific adjustments.
Step 7: Completion and Verification
Confirm that the dishwasher is fully integrated, securely installed, and all utility connections are correctly made. The appliance is now ready for its first use, following the instructions in the main operating manual.
