Miele G 7690 SCVi Dishwasher Installation Guide
General Installation Information
Please observe this installation plan and read the operating instruction manual before installation, setup, and commissioning. This will protect you and prevent damage to your appliance.
Important Safety Notes:
- Risk of damage or fire hazard.
- Observe connection data.
- Warning: Danger of being cut.
- Do not use a cordless screwdriver; risk of damage.
- Screw the feet in before moving the dishwasher.
- The door springs must be set equally on both sides after fitting the front panel to the door.
Mounting and Connections
This document provides detailed diagrams for the installation of fully integrated Miele dishwashers. It outlines the necessary tools and fittings, which may vary by model.
Key steps and considerations:
- Ensure correct alignment and securing of the appliance.
- Properly connect water inlet and drainage hoses.
- Electrical connection must be made by a qualified electrician according to local regulations.
- Venting the water drain is necessary if the on-site drainage connection is situated lower than the guide path for the lower basket rollers.
- Adjustments for door springs are crucial for proper door operation after front panel installation.
Dimensions and Specifications
The installation plan includes precise measurements for appliance placement and door opening. Specific dimensions for standard and XXL models are provided.
Appliance Dimensions:
- Standard models: 60 cm width
- XXL models: 60 cm width
Refer to the diagrams for detailed measurements of required clearances and component placements.
Multilingual Support
This installation guide is available in multiple languages, including German (de), English (en), French (fr), Dutch (nl), Italian (it), Spanish (es), Portuguese (pt), Greek (el), Danish (da), Finnish (fi), Norwegian (no), Swedish (sv), Russian (ru), Ukrainian (ua), Turkish (tr), Polish (pl), Czech (cs), Croatian (hr), Hungarian (hu), Romanian (ro), Slovak (sk), Slovenian (sl), Serbian (sr), Estonian (et), Lithuanian (lt), Latvian (lv), and Bulgarian (bg).
Parts and Fittings
The package includes various fittings and accessories required for installation. The specific contents may vary depending on the model. Tools required also depend on the model. Optional accessories are available for purchase separately.