Boori Antro Modular Box
Model: BK-ANMBv2
Main Materials: Australian Araucaria
Dimensions (External): 600*400*320mm
Dimensions (Internal): 573*373*305mm
Assembly Instructions
IMPORTANT: PLEASE READ THE INSTRUCTIONS CAREFULLY AND KEEP FOR FUTURE REFERENCE.
重要:请仔细阅读此说明书,并妥善保管以便日后参考。
Step 1
Attach the back panel to the front panel. Auxiliary installation with a small hammer may be required.
[Diagram showing back panel connecting to front panel with screws]
Step 2
Insert the side panels into the assembled front and back panels. Auxiliary installation with a small hammer may be required.
[Diagram showing side panels being inserted]
Step 3
Secure the structure using the provided hardware (Bx8 screws). Auxiliary installation with a small hammer may be required.
[Diagram showing the main structure being secured with screws]
Step 4
Attach the top panel using the provided hardware (Cx4 screws).
[Diagram showing the top panel being attached]
Step 5
Possible Box Orientations: The orientation of the box can be adjusted as needed.
[Diagrams showing different possible orientations of the modular box]
Step 6
Install and remove the central shelf: The shelf can be easily installed and removed.
[Diagram showing the central shelf being installed/removed]
Step 7
Connect your Antro Modular boxes in a variety of ways: Combine multiple boxes to create different configurations.
Configuration examples:
- 3 units (I BK-ANMBv2 x 3)
- 6 units (II BK-ANMBv2 x 6)
- 4 units (III BK-ANMBv2 x 4)
- 4 units (IV BK-ANMBv2 x 4)
[Diagrams illustrating various ways to connect multiple modular boxes]
Step 8
Install the baseboard: If you chose plan I or II, please install the baseboard.
[Diagram showing baseboard installation]
Step 9
Position the furniture: Place the assembled furniture against a wall.
[Diagram showing the assembled furniture placed against a wall]
Kids Furniture Care Instructions
Assembly
- When assembling furniture, follow the assembly instructions and use the supplied tools.
- Boori products should only be assembled by an adult, away from children.
- Heavy components should be lifted by two people to prevent injury.
- Check every assembled section after assembly before proceeding to the next stage.
Product Positioning
- This product is made of timber and is therefore flammable.
- Do not place Boori furniture near open flames, fireplaces, or extreme heat sources like electric or gas heaters.
- Do not direct sprayers or humidifiers at the furniture as they can cause damage.
- Avoid exposing furniture to extreme temperature changes, as timber expands and contracts with temperature variations, which can damage the product.
- Avoid direct exposure to sunlight, which can cause natural timber and plant oil colors to fade.
- Use felt mats under items like radios, computers, and picture frames to protect your Boori furniture from marks caused by rubber feet.
- Do not place furniture in damp environments or areas with high moisture levels, as this encourages mould growth.
Cleaning
- Clean furniture by wiping with a soft, damp cloth.
- If necessary, use a mild soapy solution and wipe clean with a soft cloth.
- Do not use strong household cleaners.
- Always wipe in the direction of the wood grain, not in circles.
- Wipe up spills immediately with a soft cloth.
- Protect the furniture against bedwetting, as this can lead to discoloration.
Maintenance
- Regularly check the safety of your furniture.
- Ensure all bolts and screws are tightened and check for loose connections, missing parts, or sharp/pointed edges.
- Avoid contact with sharp objects and hot liquids.
- When moving furniture, always lift and place it into position; do not drag. It is recommended that two people lift or alter the positioning of the furniture.
Product Testing Standards
- Standard: GB 28007-2011, EN 747-1: 2012+ A1: 2015, AS/NZS 4220: 2010
Parts List / 部件清单
Hardware / 五金单
- A x 1
- B x 8
- C x 4
- D x 1
- E x 1
Hardware Details:
- M3.5x25
- M4x16
- M6x14
- M6x18
Components:
- Part 1 x 2
- Part 2 x 1
- Part 3 x 2
- Part 4 x 1
