Personal EMShape Neo® Elite with Upgraded Higher Power

USER MANUAL

Welcome

to your Personal EMShape Neo® Elite with Upgraded Higher Power

USER NOTICE

First of all, thank you for choosing the Personal EMShape Neo® Elite with Upgraded Higher Power, which combines high-tech essence, fashionable style, and innovative functions. We hope to contribute beauty to you. Before using the instrument, please read this user manual carefully and keep it in a safe place for future use. This user guide is an operation guide, not a product guarantee. MSHAPE BEAUTY reserves the right to interpret and modify the printing errors, software upgrades, and product improvements in this manual at any time. These changes will be directly incorporated into the new version of the user manual without notice. This user manual is compiled by MSHAPE BEAUTY, all rights reserved, privacy is subject to investigation.

PREFACE

Choose the relaxed & professional way to build muscle & burn fat, all in one go. Enjoy the immediate result of feeling healthier and stronger, and see visibly improved body shape in about 3 to 6 weeks' time. This machine uses high-intensity magnetic waves plus RF to tone and sculpt the targeted body areas. Reduce fat & cellulite in your targeted body areas (stomach, thighs, arms, etc.) and Increase the amount of muscle fibers and cells. The use of this machine is a safe, minimally invasive procedure, and easy to operate. There is no bleeding, no pain, and no side effects. Please read this User Manual carefully in order to use the machine properly and to protect the machine from unnecessary damages. Thank you again, and please enjoy your Personal EMShape Neo® Elite with Upgraded Higher Power !

I. PRODUCT INFORMATION & SPECIFICATION

1.1 Product Information

A high intensity magnetic pulsed energy penetrates several inches of subcutaneous muscle tissue safely and non-invasively. The energy acts on the muscle motor neural network in the brain to trigger continuous very strong muscle contractions.

Diagram showing the effect of "super muscle exercise" with 'Before' and 'After' views illustrating increased muscle density.

1.2 Product Specification

WARNING! RF energy on this machine is VERY STONG and the temperature can become VERY HOT. To make the treatment comfortable and effective, please always start with a low level of RF.

Training is strongly recommended. MSHAPE BEAUTY is not responsible for any adverse effect that should occur due to misuse of the equipment by the operator.

1.3 List of Accessories

No.ItemQuantityImage
1Body1 Set[Image of the main device unit]
2Handle2 (for Abdomen, Hips, Arms, and Legs)[Image of two handles with cables]
3Bandages3[Image of three black bandages]
4Power Cable1[Image of a power cable]

NOTE: for those who opt for "No RF", the RF controller will not be present and the energy used for the procedure will be exclusively magnetic wave energy.

II. PRODUCT APPEARANCE

II.1 Front/Side view

Front/Side view of the EMShape Neo Elite device, with labels pointing to HANDLE and DISPLAY.

II.2 Back view

Back view of the EMShape Neo Elite device, with labels pointing to SWITCH, POWER SOCKET, and HANDLE SOCKET.

III. WARNINGS

III.1 Before use

Warnings (Continued)

Warnings (Continued)

IV. OPERATING POSITION

The position of the handle must be the same as the image below:

Diagram showing correct handle placement for different body areas: Abdomen (Handles A and B), Arm (Handles A and B), Shoulder (Handles A and B), Leg (Handles A and B), Hips (Handles A and B).

V. MODE SELECTION & OPERATION

I. Function and Mode Selection

  1. After turning on the machine, the mode selection interface will appear.
  2. There are two modes: AUTO and MANUAL mode. Select which mode to use.
  3. After choosing the mode, select the appropriate settings according to gender, age range, and target treatment area.
  4. Click the icon shown below to start working.

Screenshot of the mode selection interface showing 'AUTO' and 'MANUAL' mode options.

Screenshot of the settings interface showing options for SEX (Female, Male), AGE GROUP (<30, 30-39, 40-49, 50-59, 60+), and AREA (Abdomen, Arm, Shoulder, Hips, Leg).

V.1 AUTO Mode

  1. Select the type of treatment. This is located at the bottom of the interface: HIIT: Basic training for beginners; OBESITY: Adaptation training; SLIGHTLY FAT: Preliminary training; SHAPING: Advanced training; LOSE WEIGHT: Professional training.
  2. NOTE: Each mode contains 6 different frequencies that automatically switch. The first minute of each mode is warm-up.
  3. The recommended intensity starts from 8% (weak) to 100% (strong). Intensity: Strength intensity, click [-] and [+] to adjust.
  4. NOTE: Set the intensity before the start of treatment. We recommend choosing the intensity lower and should be gradually increased according to the patient's ability to withstand it.
  5. Set the working time. The default working time of one treatment is 30 minutes. This can be adjusted from 1 minute to 30 minutes.
  6. Click ▶️ start. If need to pause, please click ⏸️. Click ◀️ return to the previous interface.
  7. Note: Click [-] and [+] to adjust parameters when the device is in a paused state.

Screenshot of the AUTO mode interface showing treatment types (HIIT, OBESITY, SLIGHTLY FAT, SHAPING, LOSE WEIGHT), intensity adjustment, and time settings.

V.2 MANUAL Mode

Screenshot of the MANUAL mode interface showing frequency adjustment (F1, F2, F3) with intensity and time settings.

Screenshot of the MANUAL mode interface showing intensity adjustment and time settings.

  1. Manually adjust the frequency on the interface as shown above. [F1]: Frequency 1, the intensity range is 3HZ (weak) to 150Hz(strong); [F2]: Frequency 2, the intensity range is 3HZ (weak) to 150Hz(strong); [F3]: Frequency 3, the intensity range is 3HZ (weak) to 150Hz(strong).
  2. NOTE: Before the start of treatment, set the frequency parameters according to the required frequency. F1 frequency works for 5 minutes, F2 frequency works for 1 minute, F3 frequency works for 5 minutes, and F1, F2, and F3 frequencies are cycled in sequence.
  3. The recommended intensity is from 8% (weak) to 100% (strong). Intensity: Strength intensity, click [-] and [+] to adjust.
  4. NOTE: Set the intensity before the start of treatment. We recommend choosing the intensity lower and should be gradually increased according to the patient's ability to withstand it.
  5. Set the working time. The default working time of one treatment is 30 minutes. This can be adjusted from 1 minute to 30 minutes.
  6. Click ▶️ start. If need to pause, please click ⏸️. Click ◀️ return to the previous interface.
  7. Note: Click [-] and [+] to adjust parameters when the device is in a paused state.

VI. FREQUENTLY ASKED QUESTIONS

6.1 Who is suitable to use this machine?

The use of this machine can provide beneficial muscle tightening for most people especially for:

6.2 Is there a difference in the effect of abdominal treatment when one or two treatment heads are used? How should we choose?

It is recommended that all patients use the two treatment heads at the same time. Both treatment heads must be in full contact with the skin, and not hover sideways or extend beyond the treatment area. This will ensure that all abdominal muscles are treated and activated. Both therapies are equally effective.

6.3 Will it melt fat while lifting the hips?

Many studies have confirmed that the metabolic activity of buttock fat is lower than that of abdominal fat. Because of this, it will not dissolve fat when treating buttocks.

6.4 Is this treatment safe? Will it affect the internal organs?

The only tissue that responds to energy is motor neurons, so it has no effect on other tissues including organs.

6.5 Will it hurt during treatment?

The process is painless and noninvasive. There is no need for anesthesia. The feeling during the treatment is the same as that of your muscles during intense exercise.

6.6 How long will the treatment take? When will I see the effect?

A course of treatment is going to take 4 weeks. Each week, 1-2 sessions are needed. A significant reduction in fat and increase in muscle is visible after 2-4 weeks after finishing the recommended course treatment. Usually after 2-3 courses of treatment, muscle mass increases by 14.5% and fat reduction by approximately 17.5%. This is just an estimation and not based on clinical trial and not a guarantee.

6.7 How long will the effect last?

The effect can be maintained for one year after 6 courses. Some people may need additional treatment to achieve the best results. If you have a course of treatment every 2-3 months, you can maintain a better and best condition.

6.8 How long does each treatment take?

A single treatment is usually 30 minutes per area of the body.

6.9 Does the machine have radiation? Is it safe?

It emits less radiation than regular cell phones. There is also a test report which proved that the radiation range of this machine is within the national safety electrical appliances.

6.10 How thick of fat can the machine penetrate?

This machine can penetrate several inches into the muscle layer. However, if the customer's fat is thick, the energy may not be able to penetrate into the muscle tissue thoroughly, so it is difficult to make the muscle contract and achieve the therapeutic effect.

6.11 Can it be combined with other body care treatments?

It can be combined with some non-traumatic fat-reducing care, such as various fat-reducing equipment, to eliminate more fat. In addition, it can be combined with some postpartum repair care to improve the health and physical problems of postpartum women.

VII. MAINTENANCE

  1. Ensure that the power supply is stable. If the local power supply voltage is unstable, it is recommended that the user add a regulated power supply with matching power.
  2. The power cord of the socket is required to be more than 1.5 square meters.
  3. When using this device, please keep away from the wall and keep a space of 30cm around the device for heat dissipation.
  4. After each treatment, clean with mild disinfectant.
  5. Please do not use alcohol or corrosive solvent to clean the host and handle to avoid damage.
  6. During treatment, avoid the damage caused by pressing the handle line and bending the handle line.
  7. DO NOT place the instrument in an environment with high temperature, humidity, dust, and direct sunlight. The instrument should be placed in a dry, cool, and ventilated room with a temperature of 5 to 40°C and a humidity of no more than 80%.

Contact Information

525 7th Ave., New York, NY 10018

Phone: 1-800-583-3349

Website: https://mshapebeauty.com/

Email: hello@mshapebeauty.com

Models: Personal EMShape Neo Elite Sculpting Machine, EMShape Neo Elite Sculpting Machine, Neo Elite Sculpting Machine, Elite Sculpting Machine, Sculpting Machine, Machine

File Info : application/pdf, 22 Pages, 3.26MB

PDF preview unavailable. Download the PDF instead.

Personal EMShape Neo Elite with Upgraded Higher Power 85923651-417f-4bc4-b03d-51ca50a01470 ?v=1720543155

References

Canva Canva

Related Documents

Preview EMShape Neo Elite Body Sculpting Machine User Manual
User manual for the EMShape Neo Elite Body Sculpting Machine with Upgraded Higher Power, detailing its features, operation, safety precautions, and maintenance.
Preview EMShape Neo Sculpting Machine Pro 5-in-1: User Manual for Body Contouring & Muscle Building
Comprehensive user manual for the EMShape Neo Sculpting Machine Pro 5 in 1 by M-Shape Beauty. Learn about HIEMT + RF technology, body sculpting, muscle building, fat reduction, operation modes (AUTO, MANUAL), treatment positions, safety warnings, troubleshooting, and maintenance.
Preview EMShape Neo Plus Body Sculpt Machine 9500W User Manual | M-SHAPE BEAUTY
Comprehensive user manual for the M-SHAPE BEAUTY EMShape Neo Plus Body Sculpt Machine 9500W. Learn about product specifications, operation modes (AUTO, MANUAL), safety warnings, treatment positions, troubleshooting, and maintenance for effective body sculpting.
Preview EMSlim Neo Personal Sculpting Machine User Manual
User manual for the EMSlim Neo Personal Sculpting Machine Upgraded With RF, detailing product information, specifications, warnings, operating procedures, and maintenance.
Preview EMShape Neo Plus Body Sculpt Machine 8500W User Manual
Comprehensive user manual for the M-SHAPE EMShape Neo Plus Body Sculpt Machine 8500W. Learn about product information, specifications, operation modes (AUTO, MANUAL), treatment levels, troubleshooting, and maintenance.
Preview M-Shape Beauty EMSLIM Body Sculpting Machine User Manual | Build Muscle & Burn Fat
Comprehensive user manual for the M-Shape Beauty EMSLIM Body Sculpting Machine. Learn about product information, specifications, warnings, operation modes (Auto and Manual), FAQs, and maintenance for effective body sculpting and muscle building.