The SC-610 is a compact, highly intelligible speaker suited to public address announcement applications. Its external speaker component finished with powder coating, and stainless steel bracket and screws ensure the unit's weatherproof capability.
Key Features
- Delivers Clear Audio: High sound pressure level (110 dB) ensures intelligible voice announcements.
- Weather-Resistant Design: IP65-rated and corrosion-resistant materials support outdoor use in typical conditions.
- Durable Build: Shock-resistant aluminum horn and stainless steel hardware provide long-term reliability.
- Compact and Lightweight: Easy to install in various locations, weighing only 1 kg (2.2 lbs).
- Ideal for Standard Systems: Designed for low-impedance setups, suitable for direct amplifier connections.
Specifications
| Specification | Value |
|---|---|
| Rated Input | 10 W (Mobile Mount use: 5 W) |
| Rated Impedance | 8 Ω |
| Sound Pressure Level | 110 dB (1 W, 1 m at 500 Hz to 2.5 kHz peak level) |
| Frequency Response | 315 Hz - 12.5 kHz |
| Polarity | Hot: Black, Com: White |
| Dust/Water Protection | IP65 |
| Operating Temperature | -20 °C to +55 °C (-4 °F to 131 °F) (must be free from dew condensation) |
| Finish | Horn flare: Aluminum, off-white, powder coating. Reflector horn and rear cover: ABS resin, off-white. Bracket, screws and bolts: Stainless steel. Speaker cable: Polyvinyl chloride insulated cabtyre cable (6 mm in diameter, 600 mm in length). |
| Dimensions | 172 (W) x 161 (H) x 188 (D) mm (6.77" x 6.34" x 7.40") |
| Weight | 1 kg (2.2 lbs) |
Optional Accessories
Swivel bracket: YS-151S (Can be used instead of the supplied bracket.)
Note: Avoid installing the speaker in locations which vibrate considerably, or under environments easy to be oil-contaminated.
Dimensions
The speaker has a width of 172 mm (6.77 inches), a height of 161 mm (6.34 inches), and a depth of 188 mm (7.40 inches).
A&E Specifications
The paging horn speaker shall be a double re-entrant design suitable for paging and tone signaling distribution. The speaker component shall be a compression driver with a phenolic diaphragm to prevent deformation from heat and moisture. Power handling shall be 10 watts, and the speaker shall have a nominal impedance of 8 ohms, suitable for use with low-impedance speaker lines. The sound pressure level, measured at 1 metre with 1 watt of power applied (500 Hz to 2.5 kHz), shall be 110 dB SPL (typical). Frequency response shall be 315 Hz to 12.5 kHz. The speaker shall comply with IEC IP65 standards for dust and moisture resistance, and operate within a temperature range of -20 °C to +55 °C (-4 °F to +131 °F). Construction shall include: Horn flare: aluminium, off-white, powder coating. Reflector horn and rear cover: ABS resin, off-white. Speaker cable: integral PVC-insulated cable with strain relief, 6 mm (0.24") diameter, 600 mm (23.62") length. Speaker dimensions shall be 172 mm (W) × 161 mm (H) × 188 mm (D) (6.77" × 6.34" × 7.40"), and weight shall be 1 kg (2.2 lbs). The paging horn speaker shall be TOA model SC-610. The optional swivel-mount bracket shall be TOA model YS-151S.
