TOA Active Horn Speaker SC-PE615
We supply sound, not equipment.
Active Horn Speaker
The SC-PE615 is a compact, highly intelligible speaker with a built-in 10W power amplifier powered by PoE+ and DC input. It provides public address announcements and remote paging via network video surveillance applications. Its rugged enclosure is IP66 rated for outdoor environments.
Key Features
- For public address announcements and remote paging.
- A compact and highly intelligible speaker.
- Built-in 10W power amplifier powered by PoE+ and DC input.
- IP66 rated for outdoor environments.
Appearance and Dimensions
The speaker has the following dimensions:
- Front View: 222mm (Width) x 162mm (Height)
- Rear View: 214mm (Width) x 192mm (Height)
- Side View A: 281mm (Depth) from mounting bracket, with a total height of 190mm to the top of the bracket.
- Side View B: Shows the mounting bracket details.
- Mounting Hole Position: Holes are Ø9mm, spaced 25mm x 25mm apart.
The finish includes an aluminum horn flare, reflector horn, and rear cover, all with off-white powder coating. The cable gland is nickel-plated copper, and brackets, screws, and bolts are stainless steel.
Specifications
| Specification | Details |
|---|---|
| Power Source | DC12V/DC24V (9V-29V), PoE+ (IEEE802.3at), PoE (IEEE802.3af) |
| Power Consumption | 35 W or less (Rated output), 4 W or less (Standby) |
| Maximum Sound Pressure Level | 115dB ± 3dB |
| Sensitivity | 105dB ± 3dB (1 W, 1 m) |
| Standby Power | ≤ 4W |
| Rated output to Speaker | 7.5W (at DC12V powered), 10W (at PoE+ powered), 5W (at PoE powered) |
| Rated output for Speaker output | 7.5W (at DC12V powered), 10W (at PoE+ powered), 5W (at PoE powered) |
| Signal to Noise Ratio | ≥ 85dB (Speaker output) |
| Frequency Response | 280Hz ~ 12.5KHz (Speaker output) |
| Distortion | 0.5% or less |
| Audio Input | -6dB, 10kΩ electronically-balanced, removeable terminal block (3 pins) |
| Speaker output | Low impedance (8Ω) |
| PoE / PoE+ Interface | RJ45 |
| Indicators | Power indicator LED (Rear side / Bottom side), Audio input indicator LED |
| Dust/Water protection | IP66 |
| Operating temperature | -20° ~ +50°C |
| Operating humidity | 10% ~ 90%RH (no condensing) |
| Finish | Horn flare: Aluminium, off-white, powder coating; Reflector horn and rear cover: Aluminium, off-white, powder coating; Cable Gland: Nickle plated copper; Brackets, screws and bolts: Stainless steel |
| Dimensions | 222(W) x 162(H) x 281(D) mm |
| Weight | 1.35 kg (2.98 lb) |
| Accessories | Removeable terminal plug (2 pins) - 1pcs, Removeable terminal plug (4 pins) - 1pcs, Removeable terminal plug (3 pins) - 1pcs |
