Introduction
This manual provides essential information for the safe and effective operation of the STIGA V302 and V302 S ride-on lawnmowers. It is crucial to read this manual thoroughly before using the machine. The document is available in multiple languages, with English serving as the primary reference.
General Overview and Identification
The STIGA V302 and V302 S are ride-on lawnmowers designed for seated operation. Key components are identified in the diagrams:
- A: Front wheels
- B: Rear wheels
- C: Steering wheel
- D: Seat
- E: Cutting deck
- F: Engine hood
- G: Headlights
- H: Seat adjustment lever
- I: Control panel/dashboard
- L: Parking brake lever
- M: Front axle
- N: Rear axle
- O: Chassis
The technical specification plate includes: CE conformity mark, sound power level (LwA) in dB, engine power (kW) and RPM, and weight (kg).
Machine Dimensions
The following dimensions are provided for the STIGA V302 and V302 S models:
| Dimension | Unit | V302 (Park 300M) | V302 S (Park 300) |
|---|---|---|---|
| A = Length | mm | 1681 | 1681 |
| A1 = Length (with cutting deck) | mm | 2252 | 2279 |
| B = Wheelbase | mm | 800 | 800 |
| C = Height | mm | 1171 | 1171 |
| D = Width | mm | 770 | 770 |
| D1 = Width (with cutting deck) | mm | 991 | 1023 |
Technical Specifications
Key technical data for the STIGA V302 and V302 S models:
| Parameter | Unit | V302 (Park 300M) | V302 S (Park 300) |
|---|---|---|---|
| Type | Park 300M | Park 300 | |
| Model | V302 | V302 S | |
| Engine | mod. | STIGA ST400 (TRE0702) | STIGA ST450 (TRE0701) |
| Displacement | cm³ | 414 | 432 |
| Drive | 2WD | 2WD | |
| Power | kW | 7.1 | 8.1 |
| Engine Speed | rpm | 3200 | 3200 |
| Electrical System | 12 V | 12 V | |
| Battery | type | VLRA | VRLA |
| Fuel | Unleaded gasoline | Unleaded gasoline | |
| Fuel Tank Capacity | l | 4.1 | 4.1 |
| Engine Oil | type | SAE 10W-30 | SAE 10W-30 |
| Engine Oil Service Class | SJ or higher | SJ or higher | |
| Engine Oil Tank Capacity | l | 1.2 | 1.2 |
| Spark Plug | Champion RC92YC or equivalent | Champion RC12YC or equivalent | |
| Spark Plug Gap | mm | 0.75 | 0.75 |
| Tires | dim. | 160 x 50-8 / 155 x 50-8 | 160 x 50-8 / 155 x 50-8 |
| Tire Pressure (Front) | bar (psi) | 1 - 15 | 1 - 15 |
| Tire Pressure (Rear) | bar (psi) | 1 - 15 | 1 - 15 |
| Cutting Height | mm | 25-85 | 25-85 |
| Forward Speed (approx.) | km/h | 9 | 9 |
| Reverse Speed (approx.) | km/h | 7 | 7 |
| Machine Weight (empty tank) | kg | 174 | 174 |
| Measured Sound Power Level | dB(A) | 99 | 99 |
| Uncertainty (Sound Power) | dB(A) | 0.75 | 0.66 |
| Guaranteed Sound Power Level | dB(A) | 100 | 99 |
| Sound Pressure Level | dB(A) | 87 | 85 |
| Uncertainty (Sound Pressure) | dB(A) | 0.8 | 0.81 |
| Vibration Value (Riding Position) | m/s² | 0.6 | 0.6 |
| Uncertainty (Vibration Riding) | m/s² | 0.3 | 0.17 |
| Vibration Value (Steering Wheel) | m/s² | 2.4 | 1.9 |
| Uncertainty (Vibration Steering) | m/s² | 0.85 | 0.34 |
Safety and Operation Notes
The manual contains important safety warnings and operational instructions. Key symbols and their meanings include:
- ⚠️: General warning indicating potential hazards.
- ?: Hearing protection recommended.
- ?♂️: Keep bystanders at a safe distance.
- ➡️: Indicates direction of movement or action.
- ?️: Fuel filler cap.
- ⚙️: Mechanical component or adjustment point.
- ✔️: Indicates a correct action or state.
- ❌: Indicates an incorrect action or state.
- [Fuel Gauge Symbol]: Indicates fuel level.
- [Oil Level Indicator]: Indicates engine oil level.
- [Battery Symbol]: Refers to the battery.
- [Tire Symbol]: Refers to tires and their pressure.
- [Cutting Height Symbol]: Indicates adjustment of cutting height.
- [Lubrication Symbol]: Indicates points requiring lubrication.
- [Brake Symbol]: Refers to the parking brake.
- [CE Mark]: Indicates conformity with European Union directives.
- [dB Symbol]: Indicates sound level.
- [kW Symbol]: Indicates power in kilowatts.
- [rpm Symbol]: Indicates engine revolutions per minute.
- [kg Symbol]: Indicates weight in kilograms.
- [bar/psi Symbol]: Indicates tire pressure units.
- [m/s² Symbol]: Indicates vibration levels.
- [Full/Empty Indicator]: For fluid levels (e.g., fuel, oil).
Specific instructions are provided for assembly, maintenance (e.g., lubrication points on page 8, tire pressure on page 5), and operation (e.g., seat adjustment on page 7, cutting height adjustment on page 7). Always ensure the machine is turned off and the parking brake is engaged before performing maintenance.
Diagram Descriptions
The manual includes several diagrams illustrating various aspects of the lawnmower:
Diagram 1: Overview and Identification
Shows a side view of the ride-on lawnmower with components labeled A-O and the technical specification plate.
Diagram 2: Dimensions
Provides front and side views with key dimensions (A, A1, B, C, D, D1) indicated.
Diagram 3: Assembly/Components
Illustrates the attachment of components like the seat, steering column, and other parts.
Diagram 4: Safety and Operation
Depicts safety warnings using symbols and shows operational controls or indicators like the parking brake.
Diagram 5: Fuel/Oil Filling
Shows how to access and fill the fuel tank and potentially check/fill engine oil.
Diagram 6: Maintenance/Lubrication
Illustrates points requiring lubrication.
Diagram 7: Control Operation
Shows how to operate a specific control, possibly the throttle or a lever.
Diagram 8: Overall Component Layout
Presents a general view of the machine with many components labeled A-L.
Diagram 9: Operator Controls
Shows the operator's position and key controls like the steering wheel and levers.
Diagram 10: Specific Component Detail
Focuses on a specific area, possibly near the wheels or chassis.
Diagram 11: Seat Mounting
Details the mounting of the seat, showing fasteners.
Diagram 12: Wheel/Axle Mechanism
Shows a close-up of the rear wheel and axle assembly.
Diagram 13 & 14: Seat Adjustment/Locking
Illustrates how to adjust or lock the seat.
Diagram 15: Cutting Height Reference
Shows a visual representation of grass height relative to cutting adjustment.
Diagram 16: Lubrication Points
A detailed diagram showing various lubrication points on the cutting deck and chassis.
Diagram 17: Chassis Detail
Shows a specific point on the chassis, possibly a grease fitting or maintenance access point.
