JisuLife Handheld Fan Life3 (F2B) User Guide

Appearance Description

The fan consists of the following parts:

• 1. Rear cover
• 2. Type-C input port
• 3. Lanyard Hole
• 4. Master switch control key
• 5. Mask (removable)
• 6. Aromatherapy box
• 7. Indicator light
• 8. Power switch / gear button

Precautions Before Use

1. Please check the product and power cord for any damage and make sure they are in good condition. Assemble them according to the instructions before powering them on.
2. Before charging the product, please check whether the voltage of the power supply used is consistent with the product label.
3. Please do not disassemble, modify or repair the product to avoid electric shock and fire accidents. For repairs, please consult the service station designated by the original seller or manufacturer.

Instructions for Use

A. Power switch / gear switch

Short press the power switch / gear button. The product can cycle through the first, second, and third gear wind modes, and then enter shutdown mode.

B. Indicator light status description

C. Product cleaning

Removing the mask

Note: Please turn off the power before removing the mask until the fan has completely stopped working.

Hold the edge of the mask with both hands and rotate counter-clockwise [↩️] until you hear a "click". After the latch is completely released, grab the edge of the mask crossbar with both hands and pull it vertically upwards to remove it. (The direction indicated by the triangle symbol [▶️] on the top of the mask (counter-clockwise) is for opening.)

1. Make sure the power is turned off before cleaning the product.
2. The mask can be cleaned with clean water. The fan blades and rear cover can be wiped with a clean cloth. After cleaning, let them sit until completely dry before installation and use.
3. Do not use water or other liquids to clean the electrical parts (such as the motor, power switch, etc.).
4. Do not touch the power and electrical components with wet hands or a damp cloth.

Installing the mask

Hold the edge of the mask crossbar and insert it vertically into the rear cover. Hold the edge of the mask with both hands and rotate clockwise [↪️] until you hear a "click" to complete the operation. (The direction opposite to the triangle symbol [▶️] (clockwise) is for closing. Note that the U-shaped symbol next to the triangle symbol aligns with the semicircular symbol on the fan casing after installation is completed.)

Fan Aromatherapy Tablet Installation

The fan package does not include aromatherapy tablets. If needed, please purchase them at the designated store. Due to material compatibility issues, incompatible aromatherapy tablets may cause corrosion to the fan mask. Problems arising from purchasing from non-designated stores are not covered by the warranty.

1. Remove the fan mask by rotating counter-clockwise [↩️] until you hear a click, then open the aromatherapy cover.
2. Place the prepared aromatherapy tablet into the aromatherapy box, then rotate clockwise [↪️] until the aromatherapy cover is fastened (with a clicking sound). The installation is complete.

Removing the Battery

Before discarding the product, the battery must be removed. Ensure the product is powered off before removing the battery. The battery should be disposed of safely according to local regulations.

1. Remove the foot pad at the bottom of the fan and then use a screwdriver to remove the screws at the bottom of the fan.
2. Use a tool to pry open the fan cover, unplug the battery connector, move the battery, and dispose of it safely in accordance with local regulations.

Safety Precautions

To ensure the safety of use and to avoid injury and property damage, please observe the following safety precautions. Incorrect use without observing these warnings may lead to accidents.

1. This product is not a child's toy. Ensure that infants and children do not play with this product. Children under 14 years of age should use it under the supervision of a guardian.
2. This product is not intended for use by users (including children) with inadequate physiology, perception, mental ability, experience, or knowledge, unless used safely under the supervision or knowledge of a person responsible for their safety.
3. Please do not blow directly on the human body for a long time, especially on the elderly and children, to avoid physical discomfort.
4. When using, do not put fingers, sharp objects, or metal objects into the product, as this will cause product failure and the risk of electric shock or injury.
5. When using, do not plug or unplug the power with wet hands or a wet towel to avoid electric shock.
6. This product is not waterproof. Do not rinse the product directly with water or use it in bathrooms, high-moisture areas, or water storage places. If the surface is wet, dry it in time before trying to turn it on. Do not re-use if completely soaked or if water has entered the interior.
7. Do not cover the air outlet and air inlet, such as with hanging clothes, towels, or other items, to avoid product failure.
8. Prohibit the use and storage in high-temperature (higher than 60°C) environments and confined spaces, such as greenhouses, construction sites, fireplaces, or exposed car interiors. This can cause plastic deformation, fire spread, battery explosion, and other failures or accidents.
9. Do not squeeze, disassemble the battery, or place the battery in a high-temperature environment (60°C and above) for a long time, otherwise there may be a risk of liquid leakage or explosion.
10. If consumers use a power adapter for charging, the power adapter's input rated voltage and current should be within 5.0V 2.0A, and it must have national mandatory safety certification before use.
11. This product uses a lithium-ion battery with no memory function. Overcharge or overdischarge will affect the service life of the product. Please charge in time and disconnect the power after full charge. If not used for a long time (more than 3 months), please fully charge it.
12. If there is smoke, fire, or other failures during use, immediately turn off the power, stop using, and send it to the dealer or manufacturer for handling. Do not disassemble it yourself to avoid danger.
13. Do not bend or pull the power cord during charging to avoid poor contact.

Product Specifications

• Brand: JisuLife
• Product Name: Handheld Fan Life3
• Product Model: F2B
• Input: 5.0V 2.0A
• Battery Capacity: 4000mAh (14.8Wh/3.7V)
• Battery Type: Lithium-ion Battery
• Charging Time: 3-5 hours
• Working Time: 4-13.5 hours (Depending On Different Gears/Usage Scenarios)
• Product Weight: Approximately 180g
• Product Size: 87×44.5×158mm

Packing Accessories

• Handheld Fan Life3 * 1
• USB-C Charging Cable * 1
• Manual * 1

Compliance Information

This product is designed to comply with relevant safety and environmental standards, including restrictions on hazardous substances as per GB/T 26572 and SJ/T11364.