JisuLife Handheld Fan Lite

User Manual

Please read these instructions carefully before use. Ensure that the device is used strictly in accordance with the requirements specified in the manual, and keep the manual for future reference.

Parts Identification

The fan consists of the following parts:

• 1. Air outlet / Display screen: The area where air is expelled and status information is shown.
• 2. Fan speed/percentage display: Indicates the current fan speed setting or battery percentage.
• 3. Power/speed button: Used to turn the fan on/off and adjust speed.
• 4. Rear cover (removable): The back part of the fan that can be detached for cleaning or battery access.
• 5. Air inlet screws: Screws securing the air inlet area.
• 6. Switch: Refers to the power/speed button.
• 7. Anti-slip Type-C connector: The port for charging the device, designed with an anti-slip feature.

Precautions Before Use

1. Before powering on, inspect the product and power cable for any damage. Ensure they are in good condition and assemble them according to the instructions.
2. Before charging the product, check that the voltage of the power supply used matches the value indicated on the product label.
3. To prevent electric shock and fire hazards, do not disassemble, modify, or repair the product. Have the product repaired at an authorized service center designated by the original distributor or manufacturer.

Operation

A. Power/Speed Control

A short press of the power button cycles through five speed settings and turns the fan off. A long press of the button at any speed setting will turn the fan off.

B. Screen Status Display

The screen displays the current status of the fan:

• Battery percentage: The battery indicator light is illuminated.
• Fan speed indicator: The indicator for the fan speed is illuminated.
• Fan speed setting: Displays the current fan speed.

Status Table:

Charging

• During Charging: The single-digit battery level number continues to flash; the battery icon continues to flash when the fan speed is displayed.
• Fully Charged: The 100% battery level is lit, and the battery icon is lit. It turns off when the power supply is disconnected.

Note: If the battery is charged to less than 15% and used while charging, only the first fan speed is available.

C. Fan Operation

1. To operate, hold the fan.
2. Rotate the fan head to a 100° angle and place it on a work surface for use. (Diagrams illustrate holding the fan, rotating the head, and placing it on a surface).

D. How to Clean

Removing the Rear Cover

Note: Turn off the fan completely before removing the rear cover.

Use a screwdriver to unscrew the screws located under the rear cover. Then, rotate the rear cover counter-clockwise until you hear a "click" sound, indicating it has opened. (Diagram shows unscrewing the rear cover).

Attaching the Rear Cover

Grip the edge of the rear cover's partition, slide it down vertically. Hold the rear frame with both hands, rotate it until you hear a "click" sound, then screw in the screws located under the rear cover to complete the task. (Diagram shows aligning and rotating the rear cover).

Cleaning and Maintenance

1. Before cleaning the product, ensure the power supply is disconnected.
2. The rear cover can be cleaned with water. The fan blades and the mask can be wiped with a clean cloth. After cleaning the mask, rear cover, and fan blades, allow them to dry completely before using them again.
3. For cleaning electrical components (e.g., motor, switch, etc.), do not use water or other liquids.
4. Do not touch the power supply and electrical components with wet hands or a wet cloth.

Battery Removal

The battery must be removed before disposing of the product. Before removing the battery, ensure the product is turned off. Dispose of the battery safely according to local regulations.

1. Using tools, remove the left and right side fan handle covers, and unscrew the left and right screws (Figure 1).
2. Remove the anti-slip pad, unscrew the fan head cover screws, and remove the head cover (Figure 2).
3. Using a tool, pry open the rear cover of the fan handle, pull out and remove the battery, and dispose of it safely according to local regulations (Figure 3).

(Diagrams illustrate the steps for battery removal: Figure 1 shows side covers and screws; Figure 2 shows pad and head cover screws; Figure 3 shows prying open the handle and removing the battery.)

Safety Precautions

To ensure safe use and prevent injury or material damage to yourself and others, please adhere to the following safety precautions. Failure to follow these safety warnings may lead to accidents due to improper use.

1. This product is not a toy. Please ensure that infants and children do not play with this product as a toy. Children under 14 years of age should use it under adult supervision.
2. This product is not suitable for use by individuals (including children) with insufficient physiological, sensory, or mental capabilities, or lack of experience or knowledge, unless they are safely supervised or instructed by a person responsible for their safety.
3. Do not blow directly onto the human body for extended periods, especially for the elderly, adults, and children, to avoid physical discomfort.
4. During use, do not insert fingers, sharp objects, metal objects, etc., into the fan, as this may cause product malfunction or injury.
5. Do not get the fan wet. Use a damp towel for cleaning and to avoid moisture for others.
6. This product is not waterproof. Do not rinse the product directly with water or use it in bathrooms or places with high humidity. If the surface gets wet, please dry it in time before attempting to turn it on. It is prohibited to use it if it is completely soaked or exposed to indoor water.
7. Do not block the air outlet and air inlet openings with objects such as clothing, towels, or other items to prevent product malfunction.
8. Avoid use and storage in environments with high temperatures (above 60°C) and enclosed spaces such as greenhouses, construction sites, fireplaces, or open car interiors, as these conditions can cause plastic deformation, flame spread, fire, battery explosion, and other malfunctions or accidents.
9. Do not compress, disassemble, or expose the battery to high temperatures (above 60°C), as this may lead to liquid leakage or explosion.
10. If using a power adapter for charging, the adapter's rated voltage and current must be within 5.0V/2.0A, and it must comply with mandatory national safety certifications before use.
11. This product uses a lithium-ion battery that does not have a memory function. Overcharging or over-discharging will affect the product's lifespan. Please charge it in a timely manner and disconnect the power supply after it is fully charged. Do not leave it unused for extended periods (over 3 months); recharge it fully.
12. If smoke, fire, or other malfunctions occur during use, turn off the device immediately to prevent further use and send it to the retailer or manufacturer. Do not disassemble it to avoid danger.
13. Do not bend or pull the power cable during charging to avoid poor contact.

Technical Specifications

• Label: JisuLife
• Product Name: Handheld Fan Life7
• Product Model: Handheld Fan Life7
• Input: 5.0V/2.0A
• Battery Capacity: 5000 mAh (18.5Wh/3.7V)
• Battery Type: Lithium-ion battery
• Charging Time: 4-5 hours
• Operating Time: 3.5-19.5 hours (depending on speed/settings)
• Product Weight: Approximately 250 g
• Product Dimensions: 84×42×193 mm

Package Contents

• Charging cable * 1
• Lanyard * 1
• User manual * 1

The content of this manual and product specifications are subject to change without prior notice.