Product Description
This document provides the instruction manual for the Victrola V50-600 Seventeen Inch Retro Neon Wall Clock. It details assembly, operation, maintenance, safety precautions, specifications, and warranty information.
The clock features a retro neon design and is powered by a single AA battery for the clock mechanism and an AC/DC adapter for the neon light.
Assembly
Follow these steps for assembling and setting up your Victrola Retro Neon Wall Clock:
- Turn the clock over onto a soft cloth (or non-abrasive paper towel) with the back facing up.
- Insert one (1) AA battery (not included) into the battery compartment. Ensure correct polarity (+ and -) as marked inside the compartment. The negative side should be inserted first.
- Note: The clock mechanism operates solely on the AA battery. The power adapter is only for the neon light feature.
- Adjust the clock's time by turning the red adjustment knob located above the battery compartment.
- To activate the neon light, attach the provided power adapter to the back of the clock and plug it into a suitable power outlet. The neon lights will turn on automatically when the adapter is plugged in.
Back View Description: The back of the clock features a "HANGER" for wall mounting, a "BATTERY COMPARTMENT" for the AA battery, a "CLOCK ADJUSTMENT KNOB", and a "POWER ADAPTER INPUT" port.
Operation and Maintenance
Battery Replacement
When the clock stops or operates abnormally, replace the battery with a new one.
Battery Precautions:
- Ensure the battery is inserted with the correct positive (+) and negative (-) orientation.
- Always use batteries of the same type. Do not mix different battery types.
- If the clock will not be used for an extended period (more than a month), remove the battery to prevent potential leakage.
- Do not heat, disassemble, or dispose of batteries in fire.
Power Adapter
- Locate the adapter plug and connect it to the clock's power adapter input.
- Plug the adapter into an appropriate 120V outlet to power the neon light.
Note: The AA battery powers the clock mechanism independently from the power adapter, which powers the neon light.
Wall Mounting
- Insert a nail or hook into a solid surface (e.g., a wall) where the clock will be displayed. An optional screw and anchor are included for mounting.
- Ensure the hanging hardware is strong enough to support the clock's weight.
- Hang the clock on the nail or hook using the hanger hole located on the back of the clock.
- Route the power cord safely to the outlet, avoiding tripping hazards or potential damage to the cord.
Caution: Be mindful of hidden pipes or electrical wiring when drilling or nailing into walls.
Cleaning and Maintenance
- Clean the chrome frame of the clock using a soft, non-abrasive cloth or paper towel.
- Clean the glass (which is clear plastic and prone to scratches) with a soft, non-abrasive cloth or paper towel.
WARNING: If the power cord for the adapter is damaged, it must be replaced with a new adapter of the correct output voltage.
Important Safety Instructions
This unit is designed for personal safety when used as directed. Improper use may lead to electrical shock or fire hazards. Read all instructions carefully before use and keep them for future reference.
- Water and Moisture: Do not use the unit near water, such as in a bathroom, kitchen sink, laundry tub, or swimming pool.
- Ventilation: Ensure proper ventilation by not placing the unit on soft surfaces like beds, sofas, or rugs that could block openings. Avoid covering ventilation openings with items like newspapers or curtains. Do not place in built-in installations like bookcases or cabinets that impede airflow.
- Heat & Flame: Keep the unit away from heat sources like radiators, stoves, or other heat-producing appliances. Do not place naked flame sources, such as lighted candles, on the apparatus.
- Power Source: Connect the unit only to the power supply type specified in the instructions or marked on the appliance. The clock mechanism remains operable even when the AC/DC adapter is disconnected.
- Power Cord Protection: Route power supply cords to prevent them from being walked on or pinched. Ensure a clear path from the unit to the outlet.
- Cleaning: Clean only as recommended in the "Care and Maintenance" section.
- Object and Liquid Entry: Prevent objects from falling into or liquids from spilling into any openings or vents. Do not expose the unit to dripping or splashing.
- Attachments: Use only attachments recommended by the manufacturer.
- Lightning and Power Surge Protection: Unplug the unit from the wall outlet during inclement weather to prevent damage from lightning and power surges.
- Overloading: Avoid overloading wall outlets, extension cords, or receptacles, as this can cause fire or electric shock.
- Damage Requiring Service: The unit should be serviced by qualified personnel if the power cord or plug is damaged, objects have fallen into or liquid spilled into the enclosure, the unit has been exposed to rain, the unit has been dropped or damaged, or if performance changes significantly.
- Periods of Nonuse: For extended periods of nonuse (one month or longer), unplug the power cord to prevent damage or corrosion.
- Servicing: Do not attempt to service the unit beyond the methods described in the operating instructions. Refer any other service needs to qualified service personnel.
Specifications
| Power Adaptor (neon light) | Input: AC100V - 240V ~ 50 / 60 Hz Output: DC 12V, 1A |
| Power (for clock) | 1 x AA battery (not included) |
| Dimensions (W x H x D) | 42 x 42 x 7cm (16.5 x 16.5 × 2.8in) |
| Weight | 1.2KG |
| Motivity Type | Quartz |
| Light Source | Neon Tube |
| Place of Use | Indoor Only |
| Voltage | 100-240V |
| Wattage | 6.5 - 7.2W |
| Accessories | Owner's Manual (1) 12V, 1A AC/DC Adapter (1) |
Note: Design and specifications are subject to change without notice.
Regulatory Information
FCC Statement
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to Part 15 of the FCC Rules. These limits are intended to provide reasonable protection against harmful interference in residential installations. This equipment generates, uses, and can radiate radio frequency energy. If not installed and used according to instructions, it may cause harmful interference to radio or television reception. The user can attempt to correct interference by reorienting or relocating the receiving antenna, increasing separation between equipment and receiver, connecting the equipment to a different circuit, or consulting a dealer or experienced radio/TV technician.
California Proposition 65 Warning
"WARNING" This product contains a chemical known to the State of California to cause birth defects or other reproductive harm. For more information, visit http://www.oehha.ca.gov/prop65.html.
Warranty Information
Victrola is a registered trademark of Innovative Technology Electronics LLC.
Innovative Technology Electronics LLC.
Limited Warranty: 90 Days Labor, One Year Parts
Innovative Technology Electronics LLC. (IT) warrants this product to be free from defects in materials under normal use for a period of One Year from the date of original purchase. This warranty is not transferable.
Within the initial 90-day period, IT will repair or replace the product at no charge if found to be defective. For the total period of One Year from the original purchase date, IT will cover the cost to repair or replace damaged parts only.
The warranty does not cover cosmetic damage, antennas, AC cords, cabinets, headbands, ear-pads, or damage due to line power surges, improper voltage supply, misuse, mishandling, accidents, acts of God, or attempted repairs by unauthorized personnel.
To Obtain Service:
The purchaser must present an original sales receipt or proof of purchase. To request a Return Material Authorization (RMA) number for service or replacement, please contact us at www.ithomeproducts.com. Returns without an RMA number on the package will be refused and returned to the sender.
Upon receipt of the returning item and inspection, IT may issue a replacement with an item of equivalent value and features. To return an item, provide your full name, return address, phone number, item purchased, and reason for return to obtain an RMA number.
All returns must be in original packaging or a reasonable substitute to prevent damage. Include full name, shipping address, and telephone number inside the package. No returns will be shipped to PO Boxes or APO addresses.
Include your check or money order payable to Innovative Technology Electronics LLC. for handling and return shipping charges:
- USD $5.00 for items $10.00 to $39.99 (Price Paid Per Unit)
- USD $10.00 for items $40.00 to $99.99 (Price Paid Per Unit)
- USD $16.00 for items $100.00 and up (Price Paid Per Unit)
Shipping fees are non-refundable.
IT is not responsible for delays or unprocessed claims due to failure to provide necessary information. Send all inquiries or RMA requests via the website: www.ithomeproducts.com/support.
Contact Information:
Innovative Technology Electronics LLC.
1 Channel Drive
Port Washington, NY 11050
Toll free: 1-877-483-2497
There are no express warranties except as listed. Repair or replacement is the exclusive remedy. IT shall not be liable for incidental or consequential damages for breach of any express or implied warranty, except to the extent prohibited by law. Implied warranties of merchantability or fitness for a particular purpose are limited to the duration of this warranty.
Some states may not allow exclusion or limitation of incidental/consequential damages or limitations on implied warranty duration, so these exclusions may not apply to you. This warranty grants specific legal rights, and you may have other rights that vary by state.
Made In China.
