Victrola Flip Clock

Product Overview

Front View

The front view displays the clock face with large, clear digits. At the time of the image, it shows "12:40 PM". The display is divided into two sections for hours and minutes, with "PM" indicated.

Back View

The back view of the clock reveals the components for operation. It features a battery cover, which is accessible for inserting batteries. A "Time Knob" is also present, used for setting the clock's time.

Inserting Batteries

1. Open the Battery Cover located on the back of the clock.
2. Properly insert 2 D Batteries (not included) ensuring correct positive (+) and negative (-) polarity alignment.
3. Secure the Battery Cover back in place.

Setting Time

Locate the Time Knob on the back of the clock. Rotate the Time Knob until the clock displays the desired time.

CAUTION: Do not rotate the Time Knob in the wrong direction, as it may damage the clock.

WARNING

• Ensure batteries are inserted with the correct positive (+) and negative (-) orientation.
• Change batteries approximately every 5 months to prevent battery leakage that could damage the product.
• Children should use the product under adult supervision.
• Only use D batteries; do not use other battery voltages.
• Always use batteries of the same type; never mix different battery types.
• When using rechargeable batteries, follow the precautions listed on their labels.
• Do not heat or disassemble batteries. Never dispose of old batteries by throwing them into a fire.
• Do not dispose of the device in standard garbage disposal sites. Dispose of the device at available Battery Recycling Sites after fully discharging the battery. Failure to do so may violate local disposal laws and regulations. Please refer to local regulations for proper battery disposal.
• Remove batteries if the product will not be used for an extended period.

Specifications

Operating Temperature Range: -10°C (14°F) ~ 50°C (122°F)

Please note: As a result of continual improvements, the design and specifications of this product are subject to change without notice.

Made in China.

Warranty Information

Victrola is a registered trademark of Innovative Technology Electronics LLC.

Limited Warranty: 90 Days Labor, One Year Parts

Innovative Technology Electronics LLC. (IT) warrants the product to be free from "Defects" in materials under normal use for a period of "One Year" from the date of the original purchase. The warranty is "Not" transferable. IT agrees, within the initial "90 Day" period, to repair or replace the product if it is determined to be defective at "No Charge". IT will cover the cost to repair or replace damaged "Parts" only for a total period of "One Year" from the date of the original purchase. The warranty does not cover cosmetic damage, antennas, AC cords, cabinets, headbands, ear-pads, or damage due to line power surges, connection to improper voltage supply or settings, misuse, mishandling, accident, acts of God, or attempted repair by an unauthorized service agent.

Obtaining Service

To obtain service, the purchaser MUST present an original sales receipt / proof of purchase. Please contact us at www.victrola.com to request an RMA (Return Material Authorization) number to return products for service or replacement. Returns without an RMA number on the package will be refused and returned to sender. Upon receipt of the returning item and our full inspection, IT may issue a replacement to the customer for the same item or one that has equivalent value and features. To return an item, supply full name, return address, phone number, item purchased, receipt of purchase, and reason for return to obtain an RMA number.

All returns must be in the original packaging or a reasonable substitute to prevent damage. The customer "Must" include full name, shipping address, and telephone number inside the package. No return will be shipped back to a PO Box or APO address.

Please include your check or money order in the amount of:

• USD $5.00 for items $10.00 to $39.99 (Price Paid Per Unit)
• USD $10.00 for items $40.00 to $99.99 (Price Paid Per Unit)
• USD $16.00 for items $100.00 and up (Price Paid Per Unit)
• Shipping fees are non-refundable.

Payments should be made payable to Innovative Technology Electronics LLC. (for handling and return shipping charges). IT will not be responsible for delays or unprocessed claims resulting from a purchaser's failure to provide any / all of the necessary information. Send all inquiries or RMA requests via our website www.victrola.com/pages/technical-support.

Contact Information:

Innovative Technology Electronics LLC.
1 Channel Drive
Port Washington, NY 11050
Toll free: 1-877-483-2497
Website for support: www.victrola.com/pages/technical-support

There are no express warranties except as listed above. REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY OF THE CUSTOMER. (IT) SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW. ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY.

Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the above exclusions or limitations may not apply to you. This warranty gives you specific legal rights and you may also have other rights, which vary from state to state.