Carrera GO!!! Chase 'n Race

Product Information

Brand: Carrera

Model: GO!!! Chase 'n Race

Model Number: 20062577

Website: www.carrera-toys.com

Track Length: 5.3 m (17.39 feet)

Track Layout Size: 180 x 75 cm (5.90 x 2.46 feet)

Assembly Instructions

Follow these steps to assemble your Carrera GO!!! Chase 'n Race track:

1. Step 1: Track Layout

   Arrange the track pieces according to the diagram. Ensure all track sections are securely connected.

   • Connect straight sections (A, L) and curved sections (B, G, K) to form the desired track layout.
   • Use the supports (D) to elevate sections of the track as shown in the diagrams.
   • The set includes various types of track pieces: straights, curves, and special sections like the loop.
2. Step 2: Connecting Power

   Connect the power supply unit to the track and the power outlet.

   • Ensure the correct power adapter is used for your region (EU, GB, USA).
   • Connect the speed controllers to the track's power base.
3. Step 3: Preparing the Cars

   Ensure the cars are correctly set up for racing.

   • Attach the guide pins to the bottom of the cars.
   • Ensure the car's contacts are clean and properly aligned.
4. Step 4: Operating the Track

   Place the cars on the track and begin racing.

   • Use the speed controllers to accelerate and brake.
   • The turbo button provides a speed boost.

Diagram Descriptions:

• Diagram 1 shows the overall track layout and the different track pieces included.
• Diagram 1a illustrates connecting track sections.
• Diagram 1b shows the components for the loop section.
• Diagram 2 demonstrates how to attach the cars to the track and the function of the guide pins.
• Diagram 3 shows the speed controllers and their connection to the track.
• Diagram 4 illustrates the power connection for different regions (EU, GB, USA) and the correct/incorrect way to connect the speed controllers.
• Diagram 5 shows how to adjust the car's performance, including the turbo function.
• The final diagrams show how to replace spare parts on the car, such as guide pins and brushes.

Operating Instructions

Getting Started:

• Ensure the track is assembled correctly and all connections are secure.
• Plug in the power supply.
• Place the cars on the track.

Using the Speed Controller:

• The speed controller allows you to control the speed of your car.
• Press the trigger to accelerate and release to brake.
• The turbo button (if applicable) provides an extra burst of speed.

Car Maintenance:

• Periodically check and clean the car's contacts and guide pins.
• Replace worn brushes or guide pins as needed.

Important Safety Information

WARNING: CHOKING HAZARD - SMALL PARTS. NOT FOR CHILDREN UNDER 3 YEARS.

DANGER D'ÉTOUFFEMENT - PRÉSENCE DE PETITES PIÈCES. NE CONVIENT PAS AUX ENFANTS DE MOINS DE 3 ANS.

Decorative elements and Carrera vehicles are presented as symbolic illustrations for instructional purposes only. Refer to the parts list for package contents.

Technical and design-related changes are reserved.