Carrera GO!!! High Power Racers

Assembly and Operating Instructions

This document provides instructions for assembling and operating the Carrera GO!!! High Power Racers slot car set.

The instructions are presented in multiple languages, with English as the primary language for this document.

Company Information

Manufacturer Addresses:

• Carrera Toys GmbH, Rennbahn Allee 1, 5412 Puch/Salzburg, Austria
• Carrera Revell of Americas Inc., Suite 307N, 197 Route 18 South, East Brunswick, NJ 08816, USA
• Carrera Revell UK Ltd., Unit 10, Old Airfield Industrial Estate, Cheddington Lane, Tring HP23 4QR, United Kingdom

Track Specifications

Assembled Track Dimensions: 233 cm x 100 cm (7.64 ft x 3.28 ft)

Total Track Length: 9.0 meters (29.52 ft)

Track Layout and Parts

The main track layout is depicted in the diagram. It consists of various track pieces identified by type and quantity:

• Straight Track (1-lane): 1x (1 piece), 4x (4 pieces)
• Straight Track (2-lane): 11x (11 pieces)
• Curve Track (2-lane): 4x (4 pieces), 6x (2 pieces), 8x (2 pieces), 11x (2 pieces), 16x (2 pieces)
• Special Pieces:
  • A: Start/Finish Line (1 piece)
  • B: Lap Counter Section (1 piece)
  • C: Curves (6 pieces)
  • D: Curves (8 pieces)
  • G: Curves (4 pieces)
  • H: Curve (1 piece)
  • K: Curves (4 pieces)
  • L: Curve (1 piece)
  • M: Curves (2 pieces)
  • U: Intersection/Crossing (1 piece)

The specific arrangement of these components to form the complete track layout is illustrated in the original document's diagram.

Assembly Steps

Follow these steps for assembly:

1. Step 1: Connect track sections. This involves joining straight pieces and curve pieces together to form the desired layout. The diagram shows various combinations of straight and curved track pieces being connected.
2. Step 1a: Illustrates the connection of a straight track piece with a curve piece.
3. Step 1b: Shows the connection of two curve pieces.
4. Step 2: Connect the power supply to the track. The diagram shows the power clip being attached to the start/finish line section.
5. Step 3: Attach the car bodies. The diagram shows how to place the car bodies onto the chassis.

Power Connection

Ensure the correct power adapter is used for your region:

• EU Plug: [EU plug]
• GB Plug: [GB plug]
• USA Plug: [USA plug]

The diagram shows the power supply unit and its connection to the track, with warnings about voltage compatibility: [voltage symbol] (V=V) indicates correct connection, while [electrical hazard symbol] (V!) indicates a potential hazard if incorrect.

Operation and Maintenance

Speed Control: The controller allows for speed adjustment, indicated by 70% and 100% TURBO settings. The diagram shows how to use the speed controller.

Spare Parts Replacement: Instructions are provided for replacing parts on the cars, such as tires or guide pins. The diagrams illustrate the process of disassembling and reassembling car components.

Correct Assembly: The diagram labeled "KORREKT CORRECT CORRECTO CORRETTO" shows the proper way to assemble certain components, likely related to the car's guide or wheels.

Symbolic Illustrations: The document notes that decorative elements and vehicles are presented as symbolic illustrations for instructional purposes only. The actual package contents should be verified against the parts list.

Additional Resources

For more information, videos, and service, visit:

• www.carrera-toys.com
• www.carrera-service.com (See also video)

Manual Reference: 7.60.12.478.00

Document Version: V01-03