QS1B-1160/QS1M-1160 User Manual

Assembly Notes

• Assemble on carpet to prevent scratches.
• Phillips screwdriver or drill required (not provided).
• Cooperative assembly recommended.

Product List

Note: The following line drawings are for reference only and in some cases may be different from the actual part; please refer to the actual part. If you find missing parts or have installation problems, please contact customer service.

Accessory Package

Illustrates various screws, bolts, and tools required for assembly.

Parts Included

Diagram showing parts labeled A through Q, with quantities indicated.

Assembly Steps

Step 1

Attach part B to part A using S3 screws (x2). Ensure the front labels are in the same direction.

Diagram shows connecting two pieces of the desk frame.

Step 2

Attach part C to the assembled frame using S3 screws (x3). Ensure the front labels are in the same direction.

Diagram shows adding another component to the desk frame.

Step 3

Connect parts F, D, and G using M8*16 screws (x1) and 6mm screws (x1).

Diagram shows attaching smaller components to the main frame.

Step 4

Attach part H to the frame using S4 screws (x2). Tighten screws.

Diagram shows securing a part of the desk frame.

Step 5

Insert parts J (x2) and attach using S3 screws (x2) and S5 screws (x4). Also use M4*12 screws (x2) and 6mm screws (x1).

Diagram shows connecting more frame components.

Step 6

Attach part I (x2) to the frame using S4 screws (x2). Then, attach using S6 screws (x4) and S10 screws (x2). Ensure the table legs are vertical to the connecting rod and tighten all screws.

Diagram shows attaching the desk legs and a connecting rod.

Step 7

Secure part K using S11 screws (x4) and 6mm screws (x1). Attach part Q.

Diagram shows attaching the control box and other components.

Step 8

Attach the keypad using S7 screws (x3) and S11 screws (x18). Secure with 6mm screws (x1).

Diagram shows mounting the keypad to the desk.

Step 9

After installation, press the [RESET] button to start. The table will automatically move to the lowest point, stay for 3 seconds, rise to the highest point, and return to the initial position, indicating successful installation.

Diagram shows the fully assembled desk and a representation of the keypad with a reset button.

Keypad User Guide

Keypad Functions

• Up: Press to raise the desktop to the highest height.
• Down: Press to lower the desktop to the lowest height.
• Stand: Press and hold for 5 seconds to save the current standing position.
• Sit: Press and hold for 5 seconds to save the current sitting position.
• Memory Position Operation: Press the saved position button to move the desk to that height. Press any button to stop halfway.

Reset Operation

Press and hold the [RESET] button for 3 seconds. The desktop will automatically move to the lowest height, pause for 3 seconds, then move to the highest height and pause for another 3 seconds. Finally, it will move to the preset position. This process completes the reset.

Perform this reset process after initial installation.

Attention !

• Power supply: AC100V - 240V, 50/60HZ.
• Working environment: 14° - 104° F (-10° - 40° C).
• Before cleaning, unplug the power supply cable. Clean with a slightly damp cloth. Keep electrical components away from liquids. Ensure connection lines are safe.
• Dispose of electronic components, metal parts, plastic parts, and wires according to local laws and regulations. Do not dispose of as household waste.
• Ensure the product is installed correctly before use.
• Read the instructions carefully to understand all product functions and settings.
• Keep children away from height-adjustable desks, control units, and handsets. The manufacturer is not responsible for damages resulting from children's actions.
• Slight noise from the multi-wedge belt or brake system does not affect product use.
• Do not use corrosive or abrasive materials for cleaning. Dispose of cleaning solutions in an environmentally friendly manner.
• Understand the risks associated with product use. Children or individuals with cognitive impairment should not use this product without supervision.
• If the power supply cord is damaged, it must be replaced by the manufacturer or a qualified specialist to avoid injury.
• Operate in a clean and safe environment. Keep tools organized. Handle packaging materials carefully to avoid hazards. Be aware of potential choking risks with plastic bags for children.
• Retain the original package for future transportation if necessary.

Recycling and Disposal

This product cannot be disposed of as household waste. To protect the environment, please recycle this product using available recycling systems or contact the distributor or manufacturer for assistance.