QS1B-1460/QS1M-1460 User Manual

Assembly Notes

Assemble on carpet to prevent scratches.

Phillips screwdriver or drill required (not provided).

Cooperative assembly

Product List

Accessory Package

Note: The following line drawings are for reference only and in some cases may be different from the actual part; please refer to the actual part. If you find missing parts or have installation problems, please contact customer service.

• S1 (M8*16) x4
• S2 (6mm) x1
• S3 (M8*25) x8
• S4 (M5*16) x2
• S5 (M4*12) x2
• S6 (M8*16) x15
• S7 (M4*14) x30
• S10 (M8*16) x4
• S11 (M4*14) x22
• S12 (6mm) x1

Parts Included

• A x2
• B x1
• C x1
• D x1
• F x1
• G x1
• H x1
• J x2
• K x1
• Q x1

Assembly Steps

Step 1

Attach part B to part C using S3*2 screws.

Step 2

Attach part A*2 to part C using S3*2 screws. Ensure the 'Front' labels are in the same direction.

Step 3

Attach part B to the assembled frame using M8*16 x4 screws and 6mm x1 screw.

Step 4

Attach part F and D to the frame using S3 and S1 screws. Use M8*16 x1 and 6mm x1 screws.

Step 5

Attach part H to the frame using S3*2 screws. Connect the components as shown in the diagram.

Step 6

Attach part Jx2 to the frame using S3*2 and S5 screws. Use M8*16 x4 and M4*12 x2 screws.

Step 7

Attach the legs using S6x4 and S10x2 screws. Ensure the table legs are vertical to the connecting rod and tighten all screws.

Step 8

Attach part K to the desk using S11x8 and S12x2 screws. Ensure the two boards are aligned and seamless, then tighten the screws.

Step 9

Connect the control box and keypad using S7x3 and S11x22 screws.

Step 10

Press the 'key' to start. The table will automatically move to the lowest point, pause for 3 seconds, rise to the highest point, and return to the initial position. This indicates successful installation.

Keypad User Guide

Keypad Functions

• Up button: Moves the desktop up.
• Down button: Moves the desktop down.
• Stand: Saving button 1
• Sit: Saving button 2
• RST: Reset button

UP and Down Button Operation

Pressing the Up or Down button moves the desktop until the button is released or the highest/lowest height is reached.

Pressing and holding either button for 3 seconds initiates automatic movement to the highest or lowest height, respectively. Press any button to stop.

Location Store / Memory Location Operation

To save the current standing position: Press and hold the 'Stand' button for 5 seconds.

To save the current sitting position: Press and hold the 'Sit' button for 5 seconds.

To move to a saved standing position: Press the 'Stand' button.

To move to a saved sitting position: Press the 'Sit' button.

Reset Operation

Press and hold the 'RST' button for 3 seconds to enter reset mode. The desktop will automatically move to the lowest height, pause for 3 seconds, then move to the highest height, pause for 3 seconds, and finally return to the initial position. This process must be performed after installation.

Attention

• Power supply: AC100V - 240V, 50/60HZ.
• Working environment: 14° - 104° F.
• Before cleaning, unplug the power supply cable. Clean with a slightly damp cloth. Keep electrical components away from liquids.
• Dispose of electronic components, metal parts, plastic parts, and wires according to local laws and regulations.
• Ensure the product is installed correctly before use.
• Read instructions fully to understand product functions and settings.
• Keep children away from height-adjustable desks, control units, and handsets.
• Slight noise from the belt or brake system is normal and does not affect product use.
• Do not use corrosive or abrasive materials for cleaning. Dispose of cleaning solutions in an environmentally friendly manner.
• Understand the risks associated with product use. Children or individuals with cognitive impairment should not use the product without supervision.
• If the power supply cord is damaged, it must be replaced by the manufacturer or a qualified specialist.
• Operate in a clean and safe environment. Be mindful of packaging materials to avoid hazards.
• Retain the original package for future transportation if necessary.

Recycling and Disposal

This product cannot be disposed of as household waste. To protect the environment, please recycle this product using available recycling systems or contact the distributor or manufacturer for assistance.