TP-Link Omada POE20E-Outdoor Gigabit Outdoor PoE+ Extender

Datasheet

Product Overview

Model: POE20E-Outdoor

A cylindrical, black network device with two RJ45 ports on each end. The device has a central section with branding and indicator lights. It is designed for outdoor use.

Highlights

2 x 10/100/1000 Mbps RJ45 ports
Compatible with 802.3af/at devices
Supports up to 30 W power for stable power supply to most IP cameras
Extends PoE/PoE+ network connections by 100 m/250 m* from a PoE power supply (PSE)
Plug and play, no extra configuration required

Overview

The Gigabit Outdoor PoE+ Extender extends the data transmission distance between a PoE power supply (PSE) and a PoE receiving device (PD). It is suitable for security surveillance environments requiring long-distance wiring and is compatible with 802.3af/at devices.

Product Specifications

Hardware Features and Performance

Feature	Specification
Model Name	POE20E-Outdoor
Standard	IEEE 802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at
LED	2x Link/Act
Cable Type	10BASE-T: Category 3 or higher 2-pair UTP/STP cable (≤250 m) 100BASE-TX: Category 5 or higher 2-pair UTP/STP cable (≤100 m) 1000BASE-T: Category 5e or higher 4-pair UTP/STP cable (≤100 m)
Port	1 x 10/100/1000 Mbps auto-negotiation RJ45 port
PoE Input	1 x 10/100/1000 Mbps auto-negotiation RJ45 port, compatible with 802.3af/at devices
Max PoE Output	30 W

General

Feature	Specification
Dimensions (W x D x H)	With waterproof component: 221.7 × 31 × 31.5 mm (8.73 × 1.22 × 1.24 in) Without waterproof component: 120.8 x 31 x 31.5 mm (4.8 × 1.22 × 1.24 in)
Certifications	CE, FCC, BSMI, KC
MAC Address Table	2K
Jumbo Frame	9216 bytes

Physical Specifications and Operating Environment

Feature	Specification
Operating Temperature	-40°C to 65°C (-40°F to 149°F)
Storage Temperature	-40°C to 70°C (-40°F to 158°F)
Operating Humidity	15% to 90% RH (non-condensing)
Storage Humidity	15% to 90% RH (non-condensing)
IP Rating	IP68
Lightning Surge Protection	6 kV
ESD/EMP Protection	Air Discharge: ±15 kV Contact Discharge: ±10 kV

Notes

* POE20E-Outdoor features an ADR (Adaptive Data Rate) mechanism. Connection stability may vary depending on cable length, cable quality, and the connected device's characteristics. Under specific conditions (e.g., in a test environment using a 160 m to 170 m Cat5e cable), intermittent connection issues may occur. To resolve this, either manually set the connected device to 10 Mbps full-duplex mode or enable the extension mode on the PSE, or adjust the cable length to avoid the problematic section.

Product specifications are subject to change without notice. All brand and product names are trademarks or registered trademarks of their respective holders.

	TP-Link Omada Gigabit Outdoor PoE+ Extender POE20E-Outdoor Datasheet Datasheet for the TP-Link Omada Gigabit Outdoor PoE+ Extender (POE20E-Outdoor), detailing its features, specifications, and capabilities for extending PoE/PoE+ network connections in outdoor surveillance scenarios.
	TP-Link Omada Gigabit Outdoor PoE+ Extender Installation Guide Installation guide for the TP-Link Omada Gigabit Outdoor PoE+ Extender (POE20E-Outdoor), detailing package contents, wall and pole mounting procedures, LED indicators, connection setup, technical specifications, and safety information.
	TP-Link Omada PoE+ Extender POE10E Datasheet Datasheet for the TP-Link Omada POE10E Fast Ethernet PoE+ Extender, detailing its features, specifications, and capabilities for extending PoE network connections up to 350 meters.
	TP-Link Omada Gigabit Outdoor PoE+ Extender Installation Guide This guide provides instructions for installing the TP-Link Omada Gigabit Outdoor PoE+ Extender, including package contents, installation options, LED explanations, specifications, and safety information.
	TP-Link Omada Gigabit Outdoor PoE+ Extender Installation Guide Installation guide for the TP-Link Omada Gigabit Outdoor PoE+ Extender, covering package contents, installation options (wall and pole mounting), LED explanations, specifications, and safety information.
	TP-Link Omada POE160S PoE+ Injector Datasheet Datasheet for the TP-Link Omada POE160S PoE+ Injector, featuring 2 Gigabit ports, IEEE 802.3af/at compliance, and up to 30W PoE power output for expanding network reach.
	TP-Link Omada PoE++ Injector POE170S Datasheet Datasheet for the TP-Link Omada PoE++ Injector POE170S, detailing its specifications, features, and compliance with IEEE 802.3af/at/bt standards for high-power PoE delivery up to 60W.
	TP-Link Omada 10G PoE++ Injector (POE380S) Datasheet Datasheet for the TP-Link Omada POE380S, a 10G PoE++ Injector providing up to 90W of power, compliant with IEEE 802.3af/at/bt standards.