R. STAHL Miniature Circuit Breaker

Model: 8530/1-MCB-STA101-C10-500-2

Art. No.: 293995

Key Features

Isolation function in accordance with EN60947-2
Energy limitation class 3
Modular design for simple replacement or expansion
Easy installation: snaps onto the mounting rail in Ex e enclosures
Non-adjustable thermal and magnetic releases
Ergonomically shaped operating lever for safe switching
Padlocks (Accessories) for protection against unauthorized switching during maintenance

Product Overview

R. STAHL 8530 series miniature circuit breakers are overcurrent devices offering excellent current limiting for short circuits and high switching capacity (10, 15, or 25 kA). They minimize load on cables and provide high selectivity for upstream fuses. Available in 1- to 4-pole versions and rated currents from 0.5-63 A, with a maximum installation capacity of 4.5 subunits.

Technical Data

Explosion Protection

Application range (zones): 1, 2
Application range (Zone) note: For use in Zone 21/22 when protected by Ex tb/tc enclosure
IECEx gas certificate: IECEx FMG 19.0029U
IECEx gas explosion protection: Ex db eb IIC Gb
ATEX gas certificate: FM19ATEX0191U
ATEX gas explosion protection: II 2 G Ex db eb IIC Gb
Certificates: ATEX (FM), Brazil (ULB), China (CQST), IECEx (FM)
Declaration of conformity: Certificate of conformity (ATEX)

Electrical Data

Parameter	Value
Rated operational voltage AC	230 V
Rated operational current	10 A
Frequency	50/60 Hz
Rated switching capacity	10 kA
Electrical service life	2 x 10⁴
Mechanical service life	2 x 10⁴
1st auxiliary function	Auxiliary contact 1 change-over contact + fault signal contact 1 change-over contact
1st auxiliary function for AC rated voltage	230 V
1st auxiliary function for rated current max.	2 A
2nd auxiliary function	without
2nd auxiliary function voltage max. DC	-
Tripping characteristic	C
No. of poles	1-pole

Ambient Conditions

Ambient temperature: -40 °C ... 70 °C
Ambient temperature (Fahrenheit): -40 °F ... 158 °F
Ambient temperature note: Deviating ambient temperatures based on current certificates available on request

Mechanical Data

Degree of protection (IP) (IEC 60529): IP2X
Enclosure material: Thermoplast
Connection cross section min.: 1.5 mm²
Connection cross-section max.: 25 mm²
Connection cross-section AWG min.: 16 AWG
Connection cross-section AWG max.: 4 AWG
Connection cross-section 2 min.: 1.5 mm²
Connection cross-section 2 max.: 10 mm²
Connection cross-section 2 AWG min.: 16 AWG
Connection cross-section 2 AWG max.: 8 AWG
Min. aux. cont. con. cr.-sect.: 0.5 mm²
Max. aux. cont. conn. cr.-sec.: 4 mm²
Min. aux. co. con. cr.-se. AWG: 18 (unece.unit.AWG)
Connection cross-section of auxiliary contact AWG max.: 14 (unece.unit.AWG)
Min. tightening torque: 2 N·m
Max. tightening torque: 3 N·m
Connection cross-section note: 2-conductor connection (upper and lower chamber at the same time): upper and lower chamber max. 16/10 mm² (A maximum difference of one cross section may be clamped between the upper and lower chamber.) Permitted combinations of connection cross-sections can be found in the operating instructions.

Dimensions

Width: 65 mm (2.56 in)
Length: 165 mm (6.5 in)
Mounting depth: 138.3 mm (5.44 in)

Weight

Weight: 1 kg (2.205 lb)

Mounting / Installation

Tightening torque: 2-3 N·m (17.7 to 26.6 lbf·in)
Tightening torque auxiliary contact: 0.4-0.6 N·m (3.5 to 5.3 lbf·in)

Technical Drawings

Tripping Characteristic C: A graph illustrates the tripping time in seconds and minutes against multiples of rated current for AC and DC, showing the characteristic curve for the circuit breaker.

Dimensional Drawings: Detailed diagrams show the dimensions of the circuit breaker in millimeters and inches, including width, length, mounting depth, and pitch for horizontal mounting.

Accessories

4-way locking device

A lock-out/tag-out hasp for individually locking the component using up to four cylinder locks.

Art. No.: 227232

Cylinder lock

For closing (bracket Ø 3)

Art. No.: 107115

Fastening set

A fastening set for securing the component on the mounting plate without a DIN rail.

Art. No.: 276618

R. STAHL reserves the right to make alterations to the technical data, dimensions, weights, designs, and products available without notice. The illustrations cannot be considered binding.

	R. STAHL 8530/1-MCB-STA101-C10-500-2 Miniature Circuit Breaker - Technical Specifications Detailed technical specifications for the R. STAHL 8530/1-MCB-STA101-C10-500-2 miniature circuit breaker, including explosion protection, electrical data, mechanical data, and accessories. Suitable for system technology applications.
	R. STAHL 8530/1-MCB-STA101-C20-500-2 Miniature Circuit Breaker - Technical Data and Specifications Detailed technical specifications, features, and accessories for the R. STAHL 8530/1-MCB-STA101-C20-500-2 miniature circuit breaker, including explosion protection, electrical data, mechanical data, and mounting information.
	R. STAHL LS Miniature Circuit Breaker 8530/1-MCB-STA101-B16-500-2 - Technical Data and Features Detailed technical specifications and features of the R. STAHL LS Miniature Circuit Breaker, model 8530/1-MCB-STA101-B16-500-2. Includes information on explosion protection, electrical data, mechanical data, and accessories.
	R. STAHL 8530/1-MCB-STA101-C6-500-2 Miniature Circuit Breaker Datasheet Technical datasheet for the R. STAHL 8530/1-MCB-STA101-C6-500-2 Miniature Circuit Breaker, detailing its features, technical specifications, explosion protection, electrical data, mechanical data, and accessories.
	R. STAHL 8530/1-MCB-STA101-B20-500-2 Miniature Circuit Breaker Technical Data Detailed technical specifications and features of the R. STAHL 8530/1-MCB-STA101-B20-500-2 Miniature Circuit Breaker, including explosion protection, electrical data, mechanical data, and accessories.
	R. STAHL 8530/1-MCB-STA101-C10-500-2 Line Protection Circuit Breaker Technical Data Detailed technical specifications, features, and dimensions for the R. STAHL 8530/1-MCB-STA101-C10-500-2 line protection circuit breaker, including explosion protection certifications and electrical characteristics.
	R. STAHL Miniature Circuit Breaker 8530/1-MCB-STA101-C6-500-2: Technical Specifications and Features Detailed technical specifications, features, and accessories for the R. STAHL 8530 series miniature circuit breaker (MCB), model 8530/1-MCB-STA101-C6-500-2. Includes information on explosion protection, electrical data, ambient conditions, dimensions, and mounting.
	R. STAHL 8530/1-MCB-STA101-C16-500-2 Miniature Circuit Breaker - Technical Specifications Detailed technical specifications for the R. STAHL 8530/1-MCB-STA101-C16-500-2 Miniature Circuit Breaker, including electrical data, mechanical data, explosion protection, and accessories. This device is designed for system technology applications.