ALLPOWERS R3500 Portable Power Station

The products and materials described in this manual are subject to change at any time due to technical upgrades. The company reserves the right to change and explain the content of the manual.

1. Safety Instructions

1. Ensure to operate the product in a dry and well-ventilated place, and if it gets wet, dry it thoroughly before use.
2. To reduce the risk of injury, close supervision is necessary when using this product near children.
3. Do not put your fingers into the product, otherwise it may cause electric shock or other dangers.
4. Do not touch the AC interface with metal, otherwise it may cause electric shock, fire, and other dangers.
5. During charging or use of the product, do not block the product's vents, otherwise it may cause permanent damage to the product.
6. Please do not expose the product to rain and snow.
7. It is forbidden to use this product in an environment with strong static electricity or strong magnetic fields.
8. Please use the cable specially designed for the product; the company assumes no responsibility for damage caused by third-party equipment.
9. Do not disassemble the product at will. If this product needs service or maintenance, please find a qualified repairer.
10. Misuse, dropping, or excessive force may damage the product.
11. When disposing of used batteries, please separate batteries of different electrochemical systems.
12. In case of fire, dry powder extinguisher can be used or it can be submerged in water.
13. Ensure to keep the product away from sources of fire and heat.

2. Specifications

General Information

• Net Weight: Approx. 42 kg (93 lb)
• Dimensions: 530 * 360 * 345 mm (20.86 * 14.17 * 13.58 inches)
• Battery Capacity: 3168Wh (48V 66AH)
• Wi-Fi: Supported
• Bluetooth: Supported
• UPS (Uninterruptible Power Supply): Supported

Input Ports

• AC Input: (100 ~ 120)V ~ 15A, 1500W Max (220 ~ 240)V ~ 10A, 2000W Max
• Solar Input: (12 ~ 150)V 40A, 2000W Max

Output Ports

• AC Output * 4: (100 ~ 120)V 3200W Max (6000W peak) (220 ~ 240)V 3500W Max (6000W peak)
• USB-A * 2: 5V 2.4A, 12W Max
• USB-A * 2: 5V 3A, 9V 2A, 12V 1.5A, 36W Max
• USB-C * 2: 5/9/15V 3A, 20V 5A, 200W Max
• Car Port / DC5525 / Anderson: 12V 10A, 120W Max

Battery Information

• Battery Type: Lithium Iron Phosphate LFP
• Protection Type: High temperature protection, low temperature protection, over-discharge protection, overcharge protection, surge protection, short-circuit protection, overcurrent protection.

Environmental Operating Temperature

• Charging Temperature: 0°C ~ 40°C (32°F ~ 104°F)
• Discharging Temperature: -10°C ~ 40°C (14°F ~ 104°F)
• Storage Temperature: -20°C ~ 40°C (-4°F ~ 104°F) *Recommended: 20°C ~ 30°C
• Operating Humidity Range: 10% - 90%

Certification

Various certifications including UL, CE, FCC, RoHS, IC, and UKCA.

3. User Guide

3.1 Product Appearance Introduction

The front panel features multiple AC outlets, USB-A ports (x4), USB-C ports (x2), a DC output port, a car port, an AC input port, a solar input port, an overload protector, a power on/off button, and an LED display. It also includes connectors for Anderson and extra battery connections.

3.2 Display Icons Introduction (Touch)

The touch display shows various indicators:

• 1. Charge Percentage
• 2. Input Power
• 3. Output Power
• 4. Battery Level Indicator (e.g., 100%)
• 5. Input/Output Wattage Display
• 6. High Temperature Warning Icon [warning-high-temp]
• 7. Battery Fuse Icon [battery-fuse]
• 8. DC Indicator Icon [dc-indicator]
• 9. AC Indicator Icon [ac-indicator]
• 10. UPS Indicator Icon [ups-indicator]
• 11. Economy Mode Icon [eco-mode]
• 12. Fast Charging Icon [fast-charge]
• 13. Mute Mode Icon [mute-mode]
• 14. Output Overload Icon [output-overload]
• 15. Bluetooth Connection Icon [bluetooth-connect]
• 16. Wi-Fi Connection Icon [wifi-connect]
• 17. Car Output Icon [car-output]
• 18. Solar Input Icon [solar-input]

3.3 AC Charging

This product's AC power utilizes AP-Power fast charging technology, allowing the charging power to be adjusted via Fast Mode, Standard Mode, or Mute Mode. The maximum input for Fast Mode can reach 110-120V 1500W / 220-240V 2000W. Standard Mode can reach 1000W input, and Mute Mode (with auto-adjustment technology) supports 500W input. The default input power for custom charging is Mute Mode, and the charging power adjustment must be set in the product's mode switch. If the AC input current continuously exceeds 15A (for 220V-240V input) or 32A (for 100V-120V input), the power station's protection setting will activate the overload protection button. After confirming the product is not defective, press the AC overload protector to resume charging. If the AC input current is too high, it may cause the power switch to trip. After confirming the product is not defective, activate the power switch protection to resume use. Please use the original standard charging cable; ALLPOWERS will not bear responsibility for damages caused by the use of other unofficial charging cables. Please connect directly to the wall power outlet. It is not recommended to use an extension power socket. Simultaneously, ensure that the household wiring can sustain a 10A current. If the above conditions are not met, please switch to Standard Mode or Mute Mode for charging.

*To avoid the power station being in low voltage, please charge it within 24 hours when the power is below 5%.

3.4 Solar Charging

Users can charge the product by connecting solar panels in series as shown in the figure. When using this product for solar panel charging, please connect according to the user manual specifications. Before connecting the solar panel, please confirm that the solar panel's output voltage specification is within 150V, the current is 40A, and the maximum charging power is 2000W.

3.5 Smart Extra Battery

This R3500 power station can use two or more additional battery packs for expansion, which can meet the needs of larger capacity. When using this product for additional battery connection, please connect it according to the user manual specifications. Please note that in the connected state, the nominal maximum output power does not change; only the battery capacity is superimposed. Please use the connection cable provided by our company to connect to avoid damaging the product. The diagram shows the R3500 unit connected to an 'Extra Battery' unit.

3.6 UPS (Uninterruptible Power Supply) Function

This product supports the UPS (Uninterruptible Power Supply) function. Connect the mains power to the AC input port of this product via the AC charging cable, and the electrical appliance can use the AC output port of this product to operate (at this time, the AC power comes from the mains, not the battery). When the mains power is suddenly cut off, this product can automatically switch to battery power within 15ms. It is recommended to use a single appliance during use and avoid using multiple appliances simultaneously to prevent the product's overload protection. If the power station does not function normally or data is lost due to improper operation, the company assumes no corresponding responsibility.

Note: When connecting to the power grid, you must first turn on the AC output and ensure that the UPS function icon is lit before powering off and entering the UPS switching function.

The unit operates in two states:

Normally: When fully charged, the mains power directly supplies the appliance. [Power On indicator]

Power Cut Off: The R3500 automatically powers the appliance. [Power Outage indicator]

3.7 App Operation Guide

3.7.1 Download the App

Use your mobile phone to scan the QR codes below to download and install the application.

[QR Code for iOS]

[QR Code for Android]

3.7.2 Bluetooth Station Connection

1. Confirm that the power station and mobile phone Bluetooth are activated. Refer to '4. FAQ: Q10' for how to turn on Bluetooth.
2. Tap the Bluetooth device bar icon in the mobile app to enter the Bluetooth connection interface.
3. Tap 'Next' to scan and search for the power station.
4. Select the corresponding power station and tap to connect.
5. Once connected successfully, 'AP R3500 v2.0' will be displayed in the Bluetooth device bar.

The diagram shows a sequence of connection steps: 'Add device', 'Login', 'Confirm', with Bluetooth icons and device names.

3.7.3 Wi-Fi Connection

1. Tap the power station data and tap the 'AllPowers' name to display the Wi-Fi connection QR code. Refer to '4. FAQ: Q10' for how to activate Wi-Fi.
2. Tap the [Wi-Fi icon] in the Wi-Fi device bar in the mobile app to enter the Wi-Fi connection interface.
3. Select the portable station to enter the connection page.
4. Tap 'Scan', scan the QR code on the device to connect and link the device.
5. Once the linking is successful, the power station name and its online status will be displayed as shown in the figure below.

The diagram shows steps for Wi-Fi connection, including scanning a QR code on the device and confirming connection status.

3.7.4 Mobile App Operation Instructions

The mobile app interface displays:

• Remaining Time: [display output remaining time]
• Remaining Battery Capacity: [display remaining battery capacity]
• Input Power: [display input power]
• Output Power: [display output power]
• AC Switch: [AC switch toggle]
• DC Switch: [DC switch toggle]
• Frequency Switching Options: 50Hz / 60Hz

The setup screen allows for:

• Work Mode: Can be set to Fast Mode, Standard Mode, or Mute Mode.
• ECO Mode: Enables power saving.
• ECO Mode Shutdown Times: Allows setting automatic shutdown times (1, 2, 4, or 6 hours).
• Firmware Upgrade: Option to update the device firmware.
• Remove Device: Option to remove the device from the app.

Please place the device as close to the router as possible.

Connected device successfully. The transfer of information to the device was successful. The device is connected to the network... Distribution network is successful.

4. FAQ

1. Q1. What type of battery does the product use?

   This product uses high-quality Lithium Iron Phosphate (LFP) batteries.

2. Q2. What devices can the R3500 POWER?

   The AC output port of this product has a rated power of 100V-120V 3200W (6000W peak) or 220V-240V 3500W (6000W peak), which can power most household appliances. It is recommended to confirm the power of the electrical appliance and ensure that the sum of the power of all charging devices is less than the rated power.

3. Q3. How to know how long the product can provide power?

   The LCD screen of this product will display the remaining battery life, which can be estimated for appliances with stable power consumption.

4. Q4. How to judge the product charging?

   During charging, the LCD screen will display the remaining charging time, and the battery indicator circle outside the battery percentage has a breathing animation effect.

5. Q5. How to clean the product?

   Wipe this product with a dry, soft cloth or paper.

6. Q6. How to store the product?

   When storing, please turn off this product first, then store it in a dry and ventilated place at room temperature. Do not place this product near water. For long-term storage, it is recommended to discharge the battery to 30% and recharge to 60% every three months to extend the product's lifespan.

7. Q7. Can this product be taken on an airplane?

   No.

8. Q8. Can the R3500 be charged while in use?

   Yes, the product supports simultaneous charging and discharging.

9. Q9. Is the actual output capacity of the product consistent with the target capacity in the user manual?

   The capacity indicated in the user manual is the nominal capacity of this product's battery. Given that this product has a certain efficiency loss during the charging and discharging process, the actual output capacity is lower than the capacity specified in the user manual.

10. Q10. How to activate/deactivate the Bluetooth and Wi-Fi of the power station?

    Bluetooth & Wi-Fi are disabled by default from the factory. To turn on/off: After turning on the device, press and hold the 'DC Output' button for 3 seconds until the Bluetooth and Wi-Fi icons on the display change. The icon being constantly on indicates the ON state, and the icon blinking indicates the OFF state.

11. Q11. How to turn the button beep on/off?

    The button beep is enabled by default from the factory. To turn it on/off: After turning on the device, press and hold the 'Output + AC Output' button for 3 seconds until the prompt sounds.

5. Troubleshooting

The error code is displayed at the [indicator position] on the display screen. The associated fault type and recovery method are as follows:

6. Package Contents

The package includes:

• ALLPOWERS R3500 Portable Power Station
• AC Charging Cable
• User Manual and Warranty Card

The visual shows the ALLPOWERS R3500 unit, an AC charging cable, and a user manual/warranty card.

7. Statement

Before using this product, please read the user manual of this product to ensure correct use after complete understanding. If you do not use this product correctly, you may cause serious injury to yourself or others, or cause damage to the product and property. Once you have used this product, you are considered to have understood, acknowledged, and accepted all terms and content of this document. The user agrees to be responsible for their own actions and all consequences thereof. ALLPOWERS is not responsible for any losses caused by the user's failure to use the product in accordance with the user manual. In accordance with laws and regulations, the Company reserves the right of final interpretation of this document and all related documents of this product. If it is updated, revised, or canceled without notice, please visit the official ALLPOWERS website for the latest product information.

This product is not intended to be used in applications that require extremely high reliability and safety, such as aerospace equipment, trunk communication equipment, nuclear control equipment, and medical equipment. Please make a judgment after fully confirming the suitability of this product and equipment by yourself. If this product is used in the above equipment or equipment, we will not be liable for any injuries, fires, or malfunctions of the equipment or apparatus caused by the failure of this product.

8. Contact Us

If you have any questions or need assistance with our products and services, please email support@allpowers.com. Our official website is www.allpowers.com.