User Guide: Aerogogo LULI Canopy Tent

Manual: Setting Up the Tent

1. Take the canopy tent out of the storage bag.
2. Lay it out flat. Pull out the four air pillars in the middle. Adjust the tent width according to the positioning belt at the bottom and secure the tent with stakes.
3. Locate and close the two valves on the air pillars.
4. Open the top cap of the valve on the air pillars. Use a high-pressure hand air pump or an Aerogogo tent pump (sold separately) to inflate the tent.
5. Once fully inflated, use the four tent poles to support the tent structure.
6. Pull the ropes to the appropriate positions to secure the tent to the ground. The Aerogogo LULI Canopy Tent is now ready for use.

Storage Process

1. Remove the wind ropes, stakes, and poles.
2. Open the two exhaust valves on the air pillars and wait for the air to drain out completely.
3. Wait until the canopy tent returns to its pre-inflated state.
4. Fold the deflated canopy tent into a long strip.
5. Roll the folded tent into a cylinder starting from one end of the strip.
6. Place the rolled canopy tent and its accessories back into the storage bag.

Accessories Included

• Tent stakes (18)
• Wind ropes (14)
• Tent poles (4)
• Projection screen (1)
• TPU patch (2)
• Storage bag (1)

Notes and Usage Tips

The attached projection screen can be hung between two top rods at one end of the tent.

One end of the tent can be used as a car tent. The distance between the two tent poles is 2.5 meters, and the net height is 2.1 meters. This configuration can fit most cars easily.

The width of the tent can be adjusted by the bottom positioning belt, ranging from 2.8 to 3.5 meters.

Reminder

If minor damage occurs to an air pillar, use the provided emergency repair patch. Refer to the instructions included with the repair patch for detailed repair methods.

If the product surface is dirty and cannot be cleaned with water, use a neutral cleaning solution or soap water.

Warning

Children under 12 must be assisted by a parent or guardian when using the product.

Do not open the zipper when the tent is inflated. Damage caused by this action is not covered by the warranty and will void return and exchange services.

Basic Information

Product Name: LULI Canopy Tent

Brand: Aerogogo

Model: ZCO-01

Manufacturer: Shanghai Micronovelty Co.,Ltd.

Manufacturer Address: Room 102, Unit 2, Lane 88, Shengrong Road, China (Shanghai) Pilot Free Trade Zone

Service Email: service@aerogogo.com

Official Website: www.aerogogo.com

For after-sales support, please contact your authorized Aerogogo retailers or official customer support.

Origin: Made in China

Specifications

Weight: 15.3 kg (33.7 lb)

Fold Storage Size: 75 cm × 28 cm × 28 cm (30 in × 11 in × 11 in)

Size After Inflation: 644 cm × 300 cm × 220 cm (254 in × 118 in × 87 in)

Material of Tube: TPU

Material of Cover: Polyester+PU

Certifications: ROHS, REACH, EAC