User Manual
Setup
- Take the tent out of its storage bag.
- Unfold the tent and lay it flat. Secure it with pegs at the four corners and the center.
- Find the inflation switch on the tent and press the button to inflate.
- If the tent does not stand up automatically during inflation, lift it up manually to assist.
- Once the tent is standing upright, use two canopy poles to raise the canopy.
- Adjust and secure the guy ropes to the ground to complete the setup.
Storage
- Open the exhaust valves on the air tubs (two valves on the front two air tubs).
- Wait for the tent to return to its original state.
- Fold the bottom edges of the tent inward on both sides.
- Fold the tent in half to create a long rectangular shape.
- Starting from one end, roll the tent into a cylindrical shape.
- Place the folded tent and its accessories into the storage bag in the correct order. Packing is now complete.
Notes
Canopy pole
When the front end of the canopy is dropped vertically to the ground, it can be used as a projection screen.
The canopy can be folded upward and stored.
To ensure safety, please retract the canopy when there is strong wind or heavy rain. Connect the canopy pole to the extension pole as a support rod, and place the support rod between the two air tubes to enhance the stability of the tent.