Tzumi MegaBass V3 LED Jobsite Speaker

User Guide

Introduction & Features

The MegaBass V3 LED Jobsite Speaker is a reliable speaker designed for use anywhere. It features a subwoofer for enhanced sound and offers Bluetooth connectivity, a 3.5mm AUX jack, a MicroSD card slot, USB support, and FM radio functionality, making it suitable for various occasions.

Product Overview & Functions

The speaker's top panel features controls and ports. These include: Previous Track, Play/Pause, and Next Track buttons; Mic Volume and Echo adjustment knobs; a Charging Indicator Light; a Micro-USB Port for charging; an AUX Port for audio input; a MicroSD Card Slot for media playback; a USB Port for media playback; a Mic Port for microphone input; and a Volume Control knob. A Mode/Light button is also present.

Package Contents

MegaBass V3 LED Jobsite Speaker
Micro-USB Charging Cable
User Guide

Charging the Speaker

The speaker has an internal rechargeable battery that should be fully charged before use. To charge, connect one end of the Micro-USB cable to the speaker's Micro-USB port and the other end to a USB power source. The charging indicator light will glow red while charging and turn off when fully charged. Charging time is approximately 2-3 hours. A low power alarm will sound when the battery is low, and the speaker will automatically shut down if the battery level becomes critically low.

Pairing Devices to the Speaker

Ensure Bluetooth is enabled on your device. Turn the speaker on by rotating the volume control knob; it will automatically enter Bluetooth pairing mode. Keep your device within 3 feet of the speaker for pairing. Activate Bluetooth on your device and search for available devices. Select "Tzumi MegaBass V3" from the list and follow the prompts. A voice prompt will confirm "Bluetooth Connected" upon successful pairing. Once paired, devices will remember each other for future connections.

How to Play Music using a MicroSD card

Load your MicroSD card with songs in MP3 format. Insert the card into the speaker's MicroSD card slot. The speaker will automatically detect the card and enter MicroSD mode, starting music playback.

How to Play Music via AUX Mode

Connect an AUX-enabled device to the speaker's AUX port using a 3.5mm AUX cable. The speaker will automatically detect the connection and enter AUX Mode. Press the Play/Pause button to control music playback.

How to Play Music via FM Mode

Press the Mode/Light button to switch to FM Mode. The FM frequency range is 87.5 MHz-108.0 MHz. Press and hold the Play/Pause button to scan and store all available stations. Use the Previous or Next buttons to cycle through the saved stations. The speaker uses an internal FM antenna.

Controlling the Speaker Lights

Press and hold the Mode/Light button to turn the speaker's lights ON or OFF.

Specifications

Input: 5V/1A
Power: 10W
Bluetooth Version: 5.0
Battery: 1200mAh
Charging Time: 2-3 hrs.
Playback Time: 3 hrs.
Measurements: 8.8 x 7.7 x 14.5 in.
Weight: 3.5 lbs.

Battery Disposal

This product contains a lithium-polymer battery. Lithium-polymer batteries are environmentally safe when fully discharged. Do not dispose of this product with household waste. It must be disposed of safely at a hazardous waste collection site, recycling facility, or an electronic retailer that recycles. Consult local or state laws for proper disposal procedures.

Safeguards

Use the unit only for its intended purpose.
Keep the unit away from heat sources, direct sunlight, humidity, water, or any other liquid.
Do not expose the unit to extremely high or low temperatures, as this may damage the battery.
Do not operate the unit if it is wet to prevent electric shocks or damage to the unit.
Do not use the unit if it has been dropped or damaged in any way.
Repairs to electrical equipment should only be performed by a qualified electrician. Improper repairs may pose a serious risk.
Keep the unit out of the reach of children; this product is not a toy.

FCC Warning

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules and Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: reorient or relocate the receiving antenna; increase the separation between the equipment and receiver; connect the equipment to an outlet on a circuit different from that to which the receiver is connected; consult the dealer or an experienced radio/TV technician for help.

Customer Support

For questions or issues regarding the MegaBass V3 LED Jobsite Speaker, contact tzumi Technical Support at support@tzumi.com or 1-855-GO-TZUMI.

	Tzumi Megabass LED Jobsite Speaker: Features, Specs, and Usage Guide Comprehensive guide to the Tzumi Megabass LED Jobsite Speaker, covering features, Bluetooth pairing, AUX and FM modes, troubleshooting, specifications, and safety information.
	Tzumi Megabass LED Jobsite Speaker User Manual and Features Detailed information and user guide for the Tzumi Megabass LED Jobsite Speaker, covering features, setup, operation, troubleshooting, and specifications.
	Tzumi Sonic Bass LED Jobsite Speaker User Manual Comprehensive user manual for the Tzumi Sonic Bass LED Jobsite Speaker, detailing features, operation modes (AUX, FM, Bluetooth, SD/USB), charging, pairing, troubleshooting, specifications, and safety guidelines.
	Tzumi Megabass LED Jobsite Speaker: User Manual and Features Comprehensive guide to the Tzumi Megabass LED Jobsite Speaker, covering introduction, features, product overview, charging, pairing, music playback via AUX, FM, and TF/Micro SD cards, speaker light control, troubleshooting, specifications, battery disposal, safeguards, and FCC warnings.
	Mega Bass LED Jobsite Speaker User Manual and Features Comprehensive guide to the Mega Bass LED Jobsite Speaker by tzumi, covering introduction, features, product overview, charging, pairing, music playback via Bluetooth, TF/Micro SD, AUX, and FM modes, controlling speaker lights, troubleshooting, specifications, safeguards, and battery disposal.
	Tzumi MegaBass V3 LED Jobsite Speaker User Guide User guide for the Tzumi MegaBass V3 LED Jobsite Speaker, covering features, functions, charging, pairing, music playback via MicroSD, AUX, and FM modes, controlling speaker lights, specifications, safeguards, and FCC warnings.
	Tzumi Super Bass Jobsite Speaker User Guide: Features, Setup, and Operation Comprehensive user guide for the Tzumi Super Bass Jobsite Speaker. Learn about its features, Bluetooth pairing, TWS connection, FM radio, USB/MicroSD playback, AUX mode, LED light control, specifications, safety precautions, and customer support.
	Tzumi SoundBoost User Guide: Portable Bluetooth Speaker Comprehensive user guide for the Tzumi SoundBoost portable Bluetooth speaker, covering setup, music control, specifications, and safety warnings.