Tzumi MegaBass V3 LED Jobsite Speaker User Guide
Introduction & Features
The MegaBass V3 Speaker is a reliable speaker suitable for various environments, including beaches and indoor parties. It features a subwoofer for enhanced sound and includes Bluetooth functionality, a 3.5mm AUX jack, a MicroSD card slot, USB support, and FM radio.
Product Overview & Functions
The speaker has several controls and ports:
- Previous Track
- Micro-USB Port
- Play/Pause
- Next Track
- Mic Volume Control
- Echo
- Charging Indicator
- Volume Control
- AUX Port
- Mode/Light
- MicroSD Card Slot
- On/Off
- USB Port
- Mic Port
Package Contents
- MegaBass V3 Speaker
- Micro-USB Charging Cable
- User Guide
Charging the Speaker
The speaker has an internal rechargeable battery that should be fully charged before use. Connect the Micro-USB cable to the speaker's Micro-USB port and a USB power source. The charging indicator light is red while charging and turns off when fully charged. Charging takes approximately 2-3 hours. A low power alarm will sound when the battery is low, and the speaker will automatically shut down if the battery level is critically low.
Pairing Devices to the Speaker
Ensure your device has Bluetooth functionality. Turn the speaker on by rotating the volume control knob; it will automatically enter Bluetooth pairing mode. Keep your device within 3 feet of the speaker. Activate Bluetooth on your device and search for available devices. Select "Tzumi MegaBass V3" from the list and follow the prompts. A voice prompt "Bluetooth Connected" will confirm successful pairing. Paired devices will connect automatically in the future.
How to Play Music using a MicroSD card
Insert a MicroSD card containing MP3 format music into the speaker's MicroSD card slot. The speaker will automatically detect the card and enter MicroSD mode, starting playback.
How to Play Music using AUX Mode
Connect a 3.5mm audio cable to the speaker's AUX port and to your phone or computer. The speaker will automatically detect the connection and enter AUX Mode for audio playback.
How to Play Music using FM Mode
Press the Mode/Light button to switch to FM Mode. The FM frequency range is 87.5 MHz-108.0 MHz. Press and hold the Play/Pause button to scan and store available stations. Use the Previous or Next buttons to cycle through saved stations. The speaker uses an internal FM antenna.
Controlling the Speaker Lights
Press and hold the Mode/Light button to turn the speaker lights ON/OFF.
Specifications
- Speaker Type: 8" subwoofer
- Power: 10W
- Bluetooth Version: 5.0
- Signal to Noise Ratio: 85dB
- Battery: 1200mAh
- Charging Time: 2-3 Hrs.
- Play Time: 3 Hrs.
- Measurements: 8.8 x 7.7 x 14.5 in.
- Weight: 3.5 lbs.
Battery Disposal
This product contains a lithium-polymer battery. Dispose of it safely at a hazardous waste collection site, recycling facility, or an electronic retailer that recycles. Do not dispose of with household waste. Consult local or state laws for proper disposal procedures.
Safeguards
- Use the unit only for its intended purpose.
- Keep the unit away from heat sources, direct sunlight, humidity, water, or other liquids.
- Do not expose the device to extreme temperatures, as this may damage the battery.
- Do not operate the unit if it is wet or damp to prevent electric shock or injury.
- Do not use the unit if it has been dropped or damaged.
- Repairs should only be performed by a qualified electrician.
- Keep the unit out of reach of children.
- This unit is not a toy.
FCC Warning
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules and Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/tv technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.
Contact Information
For questions or issues with the MegaBass V3 Speaker, contact tzumi Technical Support at support@tzumi.com or 1-855-GO-TZUMI.