Blaupunkt BP 9.1A

CAUTIONS

• Please insert the micro SD card in the right direction to avoid damage to the card or the device. If the device shows an error message, please format the micro SD card from the device menu.
• Please reset the device or change the micro SD card if similar errors continue.
• Note: All files will be deleted when formatting the micro SD card or updating the firmware. Please back up important files prior to these actions.
• When the reset function is selected, the device will return to default settings.
• Blaupunkt does not warrant the performance of the device if used with a Micro SD card other than a Blaupunkt Micro SD card.
• A new Micro SD card must be formatted for first use.
• Ensure the bracket is installed correctly and firmly on the windscreen to avoid damage to the device and for a better recording angle.
• Please do not use the product in a wet environment as the device is not waterproofed/water resistant.
• Please do not record or take pictures facing the sunlight.
• To obtain a clear image, please clean the windscreen and the device lens regularly. Avoid using the device in dusty environments.
• Handle the device with care and avoid direct impact on it. Avoid using the device in high electromagnetic environments.
• Please operate the product within the temperature range of -20°C to 80°C. Continuous exposure to sunlight, especially when locked in a cabin where the temperature exceeds 80°C, may result in device malfunction, color change, housing, and image distortion.

Disclaimer

• Blaupunkt is not liable for any loss or damage caused or resulting from unauthorized disassembly or modification to the product.
• In no event shall Blaupunkt be liable for any direct, indirect, punitive, incidental, special consequential damages, to property or life, improper storage, whatsoever arising out of or connected with the use or misuse of its products.
• USA & CANADA: Products are not intended for sales in the United States and Canada. If purchased in the U.S. or Canada, this product is purchased as-is. No warranty, expressed or implied, is provided in the U.S. and Canada.
• This device is NOT intended to be used for illegal purposes, surveillance, and shall not be used in any form as evidence for claim purposes.
• Some countries prohibit drivers from mounting anything on the windshield, or restrict mounting to specific areas of the windshield. It is the owner's responsibility to mount the device in compliance with local laws.
• Errors may occur depending on the surrounding environment and the voltage of the car.
• Blaupunkt is not liable/responsible for non-recorded events, missing files, etc.
• If the car battery voltage is lesser than the setting value of cut-off voltage, the device will stop recording even in park recording mode.

STRUCTURE

The Blaupunkt BP 9.1A features the following components:

• 1. Rear camera connecting cable output
• 2. GPS tracking cable input
• 3. Bracket hole
• 4. Power cable input
• 5. Wireless control dongle input
• 6. Speaker
• 7. Lens
• 8. Microphone
• 9. On/Off button
• 10. GPS tracking light
• 11. Recording indicator light
• 12. Micro SD card slot
• 13. LCD touch screen
• 14. Rear camera connecting cable input (on rear unit)
• 15. Rear lens (on rear unit)

Diagram Description: The structure diagram shows the front and rear units of the DVR. The front unit displays numbered ports for cables and inputs, a lens, microphone, and speaker. The rear unit shows connections for the camera and its lens.

FEATURES

• Resolution: Front 4MP 2K 2048 x 1152 (30fps), Rear 2MP FHD 1920x1080 (30fps)
• Wide viewing angle: Front - 118°, Rear - 120°
• Screen display: Front, Rear, PIP (Picture in Picture)
• Display: 3.5" LCD touch screen
• Technology: Format-free Technology
• Temperature Management: Fixed High Temperature Cut-off
• Power Management: Variable Low Car Battery Voltage Cut-off
• Parking Mode: 24-hour Park Monitoring-ready with Smart Motion & Manual recording
• Display Features: Automatic Display Shutdown
• Sensors: Built-in G-sensor
• Recording: Loop Recording
• Supported Format: AVI
• ADAS: ADAS-ready (LDWS & FVSA) (Optional GPS Tracker required)
• Connectivity: Preview, Download, Playback Videos & Settings Configuration via Wireless Control App
• Audio: Built-in microphone & speaker
• Language Support: English, Korean, Japanese, Thai, Chinese
• Power supply: DC 12V ~ 24V
• Memory Support: Up to 128GB Class 10 Micro SD
• Dimensions: Front 30x64x98mm, Rear 26x53x28mm
• Weight: Front 90g, Rear 24g (without cable)
• Included in the box: Front DVR, Rear DVR, 16GB Micro SD Card, Micro SD card adapter, 3M Bracket, DVR Power Cable, Rear Camera Connecting Cable, Wireless Control Dongle.

FUNCTION

System Setup

Tap the left side of the LCD screen to enter the MENU while recording. Tapping the right side of the screen will enter different Video modes instead of the MENU.

Smartphone Pairing Guide

Android Smartphone Pairing (supports Android 8.0 & above):

• Download the "Blaupunkt DVR BP9" app from Google Play.
• Ensure the distance between the DVR and the smartphone is approximately 10 meters in an open field environment.
• Install the Wireless Dongle on the DVR USB port.
• Ensure the DVR is connected to the power source and is turned ON.
• Ensure the smartphone Location setting is ON and Mobile Data setting is OFF.
• Ensure the smartphone WiFi setting is ON.
• Turn on DVR WiFi.
• Open the "Blaupunkt DVR BP9" App, then tap on START to connect.
• Go to smartphone Wi-Fi settings to search and connect to DVR Wi-Fi ('Blaupunkt_...'). Enter '00000000' if a password is requested.
• After selecting "START", options like Live View, VOD View, Download View, and Configuration will appear.

iOS Smartphone Pairing (supports iOS 10.0.2 & above):

• Download the "Blaupunkt DVR BP9" app from the App Store.
• Ensure the distance between the DVR and the smartphone is approximately 10 meters in an open field environment.
• Install the Wireless Dongle on the DVR USB port.
• Ensure the DVR is connected to the power source and is turned ON.
• Ensure the smartphone WiFi setting is ON.
• Turn on DVR WiFi.
• Open the "Blaupunkt DVR BP9" App, then tap on START to connect.
• Go to smartphone Wi-Fi settings to search and connect to DVR Wi-Fi ('Blaupunkt_...'). Enter '00000000' if a password is requested.
• After successful pairing, enter the mobile app. At the Main Menu, select "START".
• Options will appear: Live View, VOD View, Download View, Configuration.

Important Notice: For security, it is advisable to change the WLAN security password after successful connection.

Function Views

• LIVE VIEW: Shows real-time video. Options include changing camera view (Front/Rear), starting/stopping recording, returning to MENU, and viewing recorded video.
• VOD VIEW (Playback List): Lists Normal Video, Event/Emergency, and Park Monitoring playlists. Options include returning to MENU, playing recordings, and downloading recordings.
• DOWNLOAD VIEW: Lists Normal Video, Event/Emergency, and Park Monitoring playlists. Options include file sharing (Android), file separation (Android/iOS), returning to MENU, playing recordings, and deleting downloaded files.

CONFIG SETTINGS

Access settings via the LCD screen or the Wireless Control App.

Basic Settings:

• Mode setting
• Front video quality
• Rear video quality
• Motion level
• Shock level (Parking)
• Shock level (Driving)
• Speaker
• Speaker volume
• Mic
• Mic volume
• Cut-off voltage: Set voltage level to automatically cut off power to prevent battery drainage. This can be configured via the LCD screen (Menu > System Set > Cut Off Voltage) or the Wireless Control App (Configuration > Cut-Off Voltage).
• High temp shutdown
• Auto LCD off time
• OSD (On Screen Display) setting
• Speed unit
• Front LED
• Recording channel
• Night vision
• Language
• WLAN enable
• LDWS (Lane Departure Warning System) speed
• LDWS warning
• ADAS settings
• FVSA (Front Vehicle Departure Alert)
• Recording settings
• Parking Mode

System Settings:

• Standard time set
• DST (Daylight saving time)
• Camera sensor setting
• Adjust ratio of memory (Note: All data will be deleted when ratio setting is adjusted; back up data before changing the setting)

Other Functions:

• Reset: All settings will be reset to default.
• Format SD card: All data will be deleted after formatting.
• WLAN security: Change wireless connection password. The device will reset to default settings when resetting the password. Default password: 00000000.

FIRMWARE INFORMATION is also available.

Blaupunkt DVR BP9.1A PC Viewer

Download the PC Viewer from www.blaupunkt.com/ase to manage your recordings.

The PC Viewer allows you to:

• Extract files to play front/rear video files in a normal video player.
• View Video & Files.
• View Video & Map.
• Perform Folder Search.
• Identify File Type (N: Normal, E: Event, P: Parking).

Note: Older files will be overwritten when the card memory is full and new storage space is required. Backup recordings regularly to prevent important files from being overwritten.

Retrieved File:

1. Select the "E" (Event File) icon from "FILE TYPE".
2. "Double Click" on the preferred file to playback, then "Double Click" again on the front or rear video.
3. Select the "[download icon]" icon to extract preferred files, then choose preferred saving folders to download the recordings.
4. Refer to the preferred folders to playback the downloaded recordings.

SPECIFICATIONS

• Resolution: Front: 4MP, 118° wide viewing angle; Rear: 2MP, 120° wide viewing angle
• Display mode: Front, Rear, PIP
• Screen display: 3.5" Touch Screen (320x480)
• Mode: Video
• G-sensor: Supported
• Memory: Support up to 128GB Class 10 Micro SD
• Resolutions: Front: 2048 x 1152 FHD (30fps), Rear: 1920x1080 FHD (30fps)
• Loop recording: 120MB/43sec
• Video format: AVI
• Exposure: -5 ~ +5
• 24hr Monitoring: Supported
• Motion detection: 60MB/21sec
• Built-in: G-sensor, microphone, speaker
• Display shutdown: Supported
• Language: English, Korean, Japanese, Thai, Chinese
• Playback Function: Supported
• Power Supply: DC 12V ~ 24V
• Operating temperature: -20° ~ 70°
• Storage temperature: -30° ~ 80°
• Time zone: GMT -11.00 ~ +12.00
• Format-free Technology: Supported

ACCESSORIES

The following accessories are included with the Blaupunkt BP 9.1A:

• Front DVR
• Rear DVR
• DVR Power Cable
• 3M Bracket
• Rear Camera Connecting Cable
• Micro SD Card
• Cable Clip
• Wireless Control Dongle
• Global Positioning Tracker (Optional)

*Accessories are subject to change.