Blaupunkt BP 2.2A

Introduction

This document provides operating and installation instructions for the Blaupunkt BP 2.2A Digital Video Recorder. It details the device's features, functions, structure, and important cautions for safe and effective use.

Enjoy it.

[Image description: The Blaupunkt BP 2.2A Digital Video Recorder is shown in two perspectives, highlighting its compact design and lens. The "1080 Full HD" logo is visible.]

Cautions and Disclaimer

Cautions

• Please insert the micro SD card in the right direction to avoid damage to the card or the device. If the device shows an error message, please format the micro SD card from the device menu. Please reset the device or change the micro SD card if similar errors continue. Note: All files will be deleted when formatting the micro SD card or performing a firmware update; please back up important files prior to these actions. When the reset function is selected, the device will return to default settings.
• Blaupunkt does not warrant the performance of the device if used with a Micro SD card other than a Blaupunkt Micro SD card.
• A new Micro SD card must be formatted for first use.
• Ensure the bracket is installed correctly and firmly on the windscreen to avoid damage to the device and for a better recording angle.
• Please do not use the product in a wet environment as the device is not waterproof or water-resistant.
• Please do not record or take pictures facing direct sunlight.
• To obtain a clear image, please clean the windscreen and the device lens regularly. Avoid using the device in dusty environments.
• Handle the device with care and avoid direct impact on the device. Avoid using the device in high electromagnetic environments.
• Please operate the product within the temperature range of -20°C to 80°C. Continuous exposure to sunlight, especially when locked in a cabin where the temperature exceeds 80°C, may result in device malfunction, colour change, housing damage, and image distortion.

Disclaimer

• Blaupunkt is not liable for any loss or damage caused or resulting from unauthorized disassembly or modification to the product.
• In no event shall Blaupunkt be liable for any direct, indirect, punitive, incidental, or special consequential damages to property or life, or improper storage, whatsoever arising out of or connected with the use or misuse of its products.
• USA & CANADA: Products not intended for sales in the United States and Canada. If purchased in the U.S. or Canada, this product is purchased as-is. No warranty, expressed or implied, is provided in the U.S. and Canada.
• This device is NOT intended to be used for illegal purposes, surveillance, and shall not be used in any form as evidence for claim purposes.
• Some countries prohibit drivers from mounting anything on the windshield, or restrict mounting to specific areas of the windshield. It is the owner's responsibility to mount the device in compliance with local laws.
• Errors may occur depending on the surrounding environment and the voltage of the car.
• Blaupunkt is not liable or responsible for non-recorded events, missing files, etc.
• If the car battery voltage is less than the set value of the cut-off voltage, the device will stop recording even in park recording mode.

Device Structure

The Blaupunkt BP 2.2A Digital Video Recorder consists of the following components:

• 1. 3M Bracket: For mounting the device on the windscreen.
• 2. Lens: Captures video footage.
• 3. Indicator Light:
  • Red light: Indicates the device is turning on.
  • Blue light: Blinking when video is recording; Static light when no video is recorded.
• 4. Power Button:
  • Press for emergency video recording.
  • Press and hold for 3 seconds to turn off the DVR.
• 5. Photo Capture Button:
  • Press to capture an image.
  • Press and hold for 5 seconds to reset default settings.
• 6. Microphone: Records audio.
• 7. MicroSD Card Slot: For inserting the memory card.
• 8. Type-C USB power supply: For connecting power.

[Image description: A diagram showing the top, front, and side views of the Blaupunkt BP 2.2A Digital Video Recorder, with numbered callouts corresponding to the components listed above.]

Features

• Resolution: 1920x1080 at 30fps; 2304x1296 at 25fps.
• Wide View Angle: 140° (general); Diagonal 124°, Horizontal 140°, Vertical 53° (specific).
• Input Power Supply: 12V DC input / 5V/1A output.
• Loop Recording: Configurable at 1, 3, or 5 minutes.
• Low Car Battery Voltage Cut-off: Adjustable at 11.8V, 12.0V, or 12.2V.
• Video Format: MP4.
• Micro SD Support: Up to 128GB.
• Format-Free Technology: Reduces wear on the memory card.
• Built-in Microphone and Speaker: For audio recording and playback.
• Wi-Fi Support: Enables wireless connectivity.
• Super Capacitor Technology: Ensures stable power for file saving during sudden power cuts.
• Parking Monitoring with Timelapse: Records events when the vehicle is parked.
• 24-hour Charging: Keeps the device powered.
• iOS & Android Wireless Control App: Allows remote operation and access via smartphone.
• Snapshot While Recording: Ability to capture still images during video recording.
• Language: English.
• Accessories Included: 3M bracket, Hardwire Cable, Manual Book.

Functions and Operation

Pairing DVR with Smartphone

The Blaupunkt BP 2.2A can be paired with a smartphone for remote control and access. The effective wireless range between the DVR and smartphone is approximately 10 meters (33ft) in an open field environment.

Wireless Connection (Wi-Fi)

To establish a wireless connection:

• Enable Wi-Fi & Location services on your smartphone. Refer to your smartphone's manual for instructions.
• Download the "Blaupunkt DVR Dashcam" app from the App Store (iOS) or Google Play Store (Android).
• Ensure the BP 2.2A is activated.
• Connect your smartphone to the BP 2.2A's Wi-Fi network. Once connected, press the centered blue button within the app to enter the control view.

Repeat these wireless connection steps whenever the smartphone is disconnected from the DVR.

Recording Video or Taking Photos in App

• Press the [Record] button (?) to start or stop recording.
• Press the [Take Photo] button (?) to capture a still image.

Download Video or Photo

• Navigate to the app's recording screen to select either the Video or Photo gallery.
• Press and hold your preferred video or photo to select it, then press the [Download] icon (⬇️) to download the file to your smartphone.

Emergency Recording

• An audio alert will sound when emergency recording starts.
• The device automatically begins saving emergency recordings when an impact is detected.

Parking Monitoring

This feature provides around-the-clock protection and surveillance when the ignition switch is turned off and the car is parked. Park Monitoring recording is triggered by the G-sensor.

• To configure: Go to ⚙️ Settings, choose Parking Monitor, and select the preferred mode (Low / Middle / High). Press ◀️ Back to exit the setting menu.

Timelapse

Timelapse mode records long-duration videos by compiling a series of single pictures over a period of time. This mode is integrated with the parking mode; however, the Park Monitoring Mode will turn off when Timelapse mode is active.

• To configure: Go to ⚙️ Settings, choose Time-lapse, and select the preferred duration (15Min / 12Hr / 24Hr / 48Hr). Press ◀️ Back to exit the setting menu.

Format SD Card

Formatting the SD card will delete all data. Ensure you back up important files beforehand to prevent unwanted data loss.

• To format: Go to Settings and select Format Memory Card.

Super Capacity Technology

This technology ensures that video files are saved even in the event of a sudden power cut-off, protecting your recordings.

Functions Overview Table

Accessories

• Hardwire Cable: [Description: A cable for connecting the DVR to the vehicle's power supply, often used for parking monitoring features.]
• Manual Book: [Description: The user manual providing detailed instructions for the device.]

[Images description: Visuals of the included Hardwire Cable and the Manual Book.]

Support

For support and inquiries, please contact:

Blaupunkt Car Entertainment - Asia Pacific Competence Centre

Phone: 1 301 22 019 32 01