SOMMER 7028 Zargenlichtschranke 2-Wire Photo Eye
Model Numbers: 7028, S10929-00001, S10230-00001
Product Identification
Product: Zargenlichtschranke / Frame photo eye / Photocellule d'encadrement de porte
Type: 2-Draht / 2-wire / 2 fils
Manufacturer: SOMMER
Part Numbers: 7028, S10929-00001, S10230-00001
EAN: 4015862009555
Certifications: CE
Important Safety Information
ACHTUNG! Montage von Lichtschranken darf nur von einer Fachkraft ausgeführt werden. (CAUTION! Only experts may install photo eyes.)
ATTENTION! Le montage des photocellules doit être réalisé uniquement par le personnel qualifié.
Technical Data / Technische Daten / Caractéristiques techniques
| Parameter | Value |
|---|---|
| Reichweite (empfohlen) / Range (recommended) / Portée (recommandée) | 0...6 m |
| Grenzreichweite / Range limit / Limite de portée | 8 m |
| Temperaturbereich / Temperature range / Plage de températures | -20° C ... 60° C |
| Anschluss / Connection / Raccordement | 2- Draht / 2-wire / 2 fils |
| Schutzart / Protection type / Indice de protection | IP 67 (Senoren) |
| Querschnitt Anschlussleitung / Connection cable cross-section / Section du câble de raccordement | max. 0,5 mm² |
| Montagehöhe / Installation height / Hauteur de montage | < 300 mm |
Scope of Supply / Lieferumfang / Contenu de la livraison
For 7028V000 / 7028V001:
- a TX transmitter red incl. housing / Émetteur TX rouge incl. boîtier
- b RX receiver black incl. housing / Récepteur RX noir incl. boîtier
- d 2 x Euro terminal / 2 x bornes pour l'Europe
- f 4 x screw / 4 x vis
- h 2 x back cover for wall installation / 2 x caches arrière pour montage mural
- h 20 m connection cable only at 7028V001 / 20 m câble de raccordement uniquement avec 7028V001
For S10929-00001:
- a.1 TX transmitter red incl. 10 m connection cable / Émetteur TX rouge incl. 10 m câble de raccordement
- b.1 RX receiver black incl. 10 m connection cable / Récepteur RX noir incl. 10 m câble de raccordement
- e 2 x mounting caps / 2 x capuchon de fixation
For S10230-00001:
- g 2 x mounting sheet / plaque de montage
Installation Variants / Montagevarianten / Variantes de montage
7028V000 / 7028V001
Montage Variante 1 / Installation variant 1 / Variante de montage 1
Visual description: Shows the photo eye components being mounted to a frame using screws and mounting plates. Two variants are shown, one with a direct screw mount and another using a bracket.
Montage Variante 2 / Installation variant 2 / Variante de montage 2
Visual description: Depicts mounting the photo eye using clips and screws onto a frame. Includes a detail showing the orientation of the transmitter (TX) and receiver (RX) units.
Montage Variante 3 / Installation variant 3 / Variante de montage 3
Visual description: Illustrates mounting the photo eye with screws and a specialized bracket that requires a drilled hole in the frame. Details the required hole diameter based on frame thickness.
Plate Thickness vs. Hole Diameter:
| Blechdicke / Plate thickness / Épaisseur de tôle | Lochdurchmesser / Hole diameter / Diamètre de l'orifice |
|---|---|
| 1 mm | 13 mm |
| 2 mm | 13 - 13,5 mm |
| 3 mm | 13 - 13,5 mm |
S10929-00001
Montage / Installation / Variante de montage
Visual description: Shows a two-step installation process for the S10929-00001 unit, involving inserting and securing the photo eye into its mounting position.
S10230-0000
Montage / Installation / Variante de montage
Visual description: Illustrates the installation of the S10230-0000 unit, showing it being attached to a mounting bracket.
Alignment / Ausrichtung der Lichtschranke / Orientation de la photocellule
Visual description: Demonstrates the correct alignment of the photo eye transmitter (TX) and receiver (RX) units. The units should be positioned at a 90-degree angle to the frame and should be within 300 mm of the frame edge. Incorrect alignment is marked with a red cross (❌), and correct alignment with a green checkmark (✔️).
Key Alignment Points:
- Units mounted at 90° to the frame.
- Units positioned within 300 mm of the frame edge.
Connection Diagram / Anschluss / Connection / Raccordement
Visual description: Shows the wiring connections for the 2-wire system. The transmitter (TX) is connected to the control unit with red wire, and the receiver (RX) is connected with black wire. The diagram illustrates two connection scenarios: one for the 7028V000/7028V001 models and another for the S10929-00001 model, indicating the use of 10m cables for the latter.
