Costway HW63890 Wood Storage Bench

Important Safety Information & Before You Start

Please read all instructions carefully before assembly. Retain these instructions for future reference.

• Separate and count all parts and hardware to ensure completeness.
• Read through each step carefully and follow the proper order.
• It is recommended to assemble the product near its intended use area to avoid unnecessary movement once assembled.
• Always place the product on a flat, steady, and stable surface.
• Keep all small parts and packaging materials away from babies and children, as they can pose a choking hazard.

Assembly Tips:

• Tighten screws to approximately 50% before fully securing all parts. An Allen wrench is recommended over an electric drill for better control.
• Ensure the item is placed on a flat surface for adjustment and stability.
• Gradually tighten all screws.
• If screws do not align with holes during assembly, loosen other screws to 50% and continue.
• If the item is unstable, loosen all screws, adjust on a flat surface, and retighten. Note that some holes are designed to be larger for easier adjustment.

Parts List

Identify all parts before beginning assembly:

• Part A: Side Panel (x1)
• Part B: Side Panel (x1)
• Part C: Backrest (x1)
• Part D: Seat Base (x1)
• Part E: Seat Support (x1)
• Part F: Lid (x1)
• Part G: Backrest Support (x1)
• Part H: Storage Box (x1)

Hardware List

Check all hardware is present:

• Screw (1): M7 x 90mm (x10)
• Screw (2): M4 x 15mm (x6)
• Bolt (3): M6 x 35mm (x1)
• Cap Nut (4): M6 x 13mm (x1)
• Plastic Washer (5): M6 x 20mm (x1)
• Allen Key (6): M4 (x2)

Assembly Instructions

Follow these steps for assembly:

1. Step 1: Attach side panels (A, B) to the backrest (C) using screws (1).
2. Step 2: Attach the seat support (E) and front panel (D) to the side panels (A, B) using screws (1).
3. Step 3: Attach the backrest support (G) to the side panels.
4. Step 4: Secure the seat base (D) to the side panels.
5. Step 5: Attach the lid (F) and its support components using screws (3, 5, 6).
6. Step 6: Insert the storage box (H) into the bench frame.
7. Step 7: Ensure all parts are correctly aligned and tighten all screws securely.

Return / Damage Claim Instructions

If you need to return the item or file a claim for damage:

• Do not discard the original packaging. The item must be returned in its original box for acceptance.
• Take a photo of the box markings. This text on the box helps staff identify your product number for correct part replacement.
• Take a photo of the damaged part(s), if applicable. This is required for processing claims and ensuring quick replacement or refund. Keep the original box, even if damaged.
• Send an email with the requested images. Contact the marketplace where you purchased the item, attach the images, and provide a description of your claim.