KRUSNATE
Safety and Usage
Usage: For indoor use only.
Installation Instructions
CAUTION: Before starting, turn off power at the main circuit panel.
MX Contact Information
Importador/Distribuidor: IKEA Supply Mexico, S.A. de C.V., Calle Oriente 158, número 440, Piso 3, Local JD-01, Colonia Moctezuma, Segunda Sección, Alcaldía Venustiano Carranza, C.P. 15530, Ciudad de México. Tel. 55-8310-8310. Read and follow all safety and operation instructions before using this product. For indoor use. Consult electrical specifications on the product label.
Assembly Preparation
Diagram: A person is shown holding product components, looking confused (❓). Next, the person is shown holding the components with an IKEA package nearby, indicating readiness to assemble. A screwdriver is shown with a cross symbol (❌), suggesting caution or incorrect tool usage.
Step 1: Prepare Mounting Bracket
Diagram: Shows two parts of the mounting bracket being aligned and joined. Close-up view shows two screws (2x) being inserted and tightened with a screwdriver.
Step 2: Mount Bracket to Ceiling
Diagram: The mounting bracket is shown being attached to the ceiling. Electrical wires are fed through the bracket. Two screws are used to secure the bracket to the ceiling.
Step 3: Connect Wires
Diagram: The main body of the light fixture is positioned below the ceiling mount. Wires from the ceiling are shown connecting to the corresponding wires of the fixture using wire connectors.
Step 4: Identify and Connect Wires
Diagram: Illustrates wire identification:
- Live/Phase/Con corriente: (Shown as a black wire with a white tracer)
- Neutral/Neutre/Neutro: (Shown as a black wire)
- Earth/Ground/Terre/Tierra: (Shown as a green/yellow wire)
The diagram then shows the actual wire connections being made using wire connectors (3x), connecting the ceiling wires to the fixture wires.
Step 5: Attach Fixture Body
Diagram: The main body of the light fixture is shown being lifted and attached to the mounted bracket. Two screws (2x) are used to secure the fixture body to the bracket.
Bulb Replacement
ℹ️ Important Information
WHEN CHANGING BULB: Use only GU10 LED bulbs. Do not use GU10 Halogen bulbs.
Adjusting Spotlights
Diagram: Shows the adjustable spotlight heads. Arrows indicate that the heads can be tilted and rotated to direct light.
© Inter IKEA Systems B.V. 2022