KRUSNATE Ceiling Spotlight Assembly Instructions

Safety Information

For indoor use only.

IMPORTANT: Always shut off power to the circuit before starting installation work. In some countries, electrical installation work may only be carried out by an authorized electrical contractor. Contact your local electricity authority for advice.

Different materials require different types of fittings. Always choose screws and plugs that are specially suited to the material.

Assembly Instructions

Step 1

Attach the mounting bracket to the ceiling using screws. The diagram shows the bracket being positioned and secured with two screws (2x).

Step 2

Feed the electrical cable through the fixture's arm. Prepare the wire ends by stripping approximately 20 mm (13/16") of insulation.

Step 3

Connect the wires inside the ceiling canopy. The diagram shows the main canopy being placed over the wiring connections.

Step 4 & 5

Prepare the lamp holders. This involves inserting a component into a connector and securing it with a cover. The diagrams show a tube-like part being inserted and a cap being closed.

Step 6

Guide the electrical cable through the fixture's arm and secure it. The diagram shows the cable passing through the arm and being held in place.

Step 7

Connect the wires to the lamp holders using push-in connectors. The diagram shows two wires being inserted into each connector (2x), with clear indications for Live (L) and Neutral (N) connections.

Step 8 & 9

Connect the wires to the lamp holder terminals and secure the housing. The diagrams show wires being inserted into terminals and the housing being closed with an audible 'Click!' sound.

Step 10

Attach the main fixture to the mounting bracket. The diagram shows the fixture being lifted into place and secured with screws (2x).

Bulb Replacement

When changing bulbs, use only GU10 LED bulbs. Do not use GU10 Halogen bulbs.