Important Information & Safety
⚠️ For indoor use only.
CAUTION: Before starting, turn off power at the main circuit panel.
Installation Steps
Step 1: Mount the Bracket
Attach the mounting bracket to the ceiling. Route the electrical wires through the central opening of the bracket. The diagram shows the bracket being secured with two screws (2x) and wires passing through.
Step 2: Connect Wires
Connect the electrical wires from the ceiling to the fixture wires. Ensure correct connections: Live (Phase) to Live, Neutral to Neutral, and Earth/Ground to Earth/Ground. Use the provided wire connectors (3x).
Wire identification:
- English: Live / Neutral (with tracer) / Earth/Ground
- Français: Phase / Neutre (avec orientateur) / Terre
- Español: Con corriente / Neutro (con orientador) / Tierra
The diagram illustrates the wire connections using wire nuts.
Step 3: Secure the Fixture
Attach the main light fixture body to the mounted bracket using two screws (2x). The diagram shows the fixture being lifted and secured onto the bracket with arrows indicating the direction of attachment.
Bulb Replacement
ℹ️ When changing bulbs, use only GU10 LED bulbs. Do not use GU10 Halogen bulbs.
The diagram shows how to carefully remove and insert a bulb into the spotlight head by gently pushing and twisting.
Final Adjustments
The spotlight heads can be adjusted to direct light as needed. The diagram shows the spotlight heads being tilted and rotated.
