ENHET Storage System Assembly Instructions

Important Safety Information ⚠️

WARNING! Serious or fatal crushing injuries can occur from furniture falling down. To prevent this furniture from falling down, it must be used with the wall attachment device(s) provided.

Screw(s) and plug(s) for the wall are not included. Assess the suitability of the wall to ensure that it will withstand the forces generated. Use screw(s) and plug(s) suitable for your walls and the intended load. If you are uncertain, seek professional advice. Read and follow each step of the instructions carefully.

Parts Overview

Assembly Steps

Step 1: Attach Frame Connectors

Take two frame sections. Insert one bracket (part number 10049776) into the designated slots at the top of one frame section. Repeat with another bracket (part number 10049777) on the other side of the same frame section. Ensure the brackets are fully seated.

Step 2: Join Frame Sections

Connect the two frame sections using four connectors (part numbers 10045539 and 10048814). Slide the connectors into the corresponding holes on the frame sections until they click into place.

Step 3: Attach Vertical Supports

Insert vertical support poles into the frame. Use connectors (part numbers 10045539 and 10048814) to secure the poles to the frame, ensuring they are pushed in firmly.

Step 4: Add More Vertical Supports

Continue adding vertical support poles to the frame and secure them with connectors (part numbers 10045539 and 10048814).

Step 5: Place Top Frame

Position the top frame piece onto the assembled vertical supports. Align the holes and push down to secure it.

Step 6: Secure Top Frame

Insert connectors (part numbers 10045539 and 10048814) into the top frame to lock the vertical supports in place.

Step 7: Install Shelf Supports (First Set)

Insert four shelf supports (part numbers 10069893 and 10072313) into the designated holes on the vertical poles for the first shelf. Push them in until they click.

Step 8: Install Shelf Supports (Second Set)

Insert another four shelf supports (part numbers 10069893 and 10072313) into the designated holes for the second shelf. Push them in until they click.

Step 9: Secure Internal Shelf Supports

Clip the internal shelf supports (part numbers 10045538 and 10048813) into the frame to hold the shelves. There are six such supports.

Step 10: Attach Wall Mounting Brackets

Attach two wall mounting brackets (part numbers 10049771 and 10051661) to the top of the assembled unit. The diagram shows the brackets clipping securely onto the frame.

Step 11: Prepare for Wall Mounting

The unit is now ready to be mounted to the wall. Use screws (2x) for wall attachment. Note: Wall screws and plugs are not included and must be purchased separately based on your wall type.

Step 12: Secure Frame with Clips

Secure the frame further by inserting six clips (part numbers 10084312 and 10093549) into the designated holes on the frame.

Step 13: Place Shelves

Slide the six shelves into place, resting them on the installed shelf supports. The diagram shows the shelves being placed and secured.

Step 14: Mount Unit to Wall

Align the unit with the wall and attach the wall mounting brackets to the wall using appropriate screws and plugs (not included). The diagram shows the sliding and locking mechanism for securing the unit to the wall.

Step 15: Final Wall Securing

Ensure the unit is securely attached to the wall by confirming the wall mounting brackets are properly engaged with a 'click' sound.

Step 16: Connect Multiple Units

If connecting multiple ENHET units side-by-side, use the provided connectors to join them securely. The diagram shows two units being joined.

Step 17: Attach Base Feet

Attach the eight base feet (part numbers 10044491 and 10044738) to the bottom of the unit. The diagram indicates using a hammer (?) to gently tap them into place.

Step 18: Final Assembly Check

Review all connections and ensure the unit is stable and securely assembled.

Product Information

Product Name: ENHET

Brand: IKEA

Article Number: AA-2371512-1

Designed and Quality: IKEA of Sweden