ENHET

Important Information

Read carefully. Follow each step of the instruction carefully. Keep this information for further reference.

WARNING

[warning] Serious or fatal crushing injuries can occur from furniture tip-over. To prevent this furniture from tipping over, it must be permanently fixed to the wall/floor with the included wall/floor attachment devices.

Fastening devices for the wall/floor are not included since different wall/floor materials require different types of fastening devices. Use fastening devices suitable for the walls/floor in your home. For advice on suitable fastening devices, contact your local specialized dealer.

Safety Recommendations:

• Place heaviest items in the lowest drawers.
• Prevent children from climbing or hanging on the drawers, doors or shelves.

Assembly Instructions

Step 1: Prepare and Identify Parts

Gather necessary tools: screwdriver, pencil, spirit level. Ensure parts are handled correctly to avoid damage, as shown in the diagrams (avoid improper stacking).

Step 2: Assemble Base Frame

Assemble the base frame by connecting horizontal and vertical frame pieces using screws. Parts used include 4x of {10045538, 10048813, 10051066} and 4x of {10045539, 10048814, 10051037} for the base structure.

Step 3: Attach Corner Brackets

Attach one 10049777 corner bracket and one 10049776 corner bracket to the frame as shown.

Step 4: Install Vertical Supports

Install the vertical poles into the frame. Ensure they are securely seated.

Step 5: Add More Vertical Supports

Install additional vertical poles into the frame.

Step 6: Attach Base Feet

Attach three (3x) base feet (parts like 10045539, 10048814, 10051037) to the bottom of the vertical poles.

Step 7: Attach Horizontal Frame Pieces

Connect horizontal frame pieces to the vertical poles.

Step 8: Attach Top Frame Piece

Attach the top frame piece to complete the main structure.

Step 9: Secure Unit for Movement

Use straps to secure the unit, possibly for stability during movement or final positioning.

Step 10: Position Unit

Carefully tilt or move the assembled unit into its final position.

Step 11: Insert Shelves

Insert shelves into the unit. Use shelf supports (4x) and ensure they click into place.

Step 12: Attach Top Brackets

Attach two (2x) brackets (parts like 10044491, 10044738, 10051019) to the top of the unit using screws.

Step 13: Attach More Top Brackets

Attach another two (2x) brackets to the top of the unit.

Step 14: Attach Wall Mounting Brackets

Attach two (2x) brackets (parts like 10049771, 10051623, 10051661) to the top of the unit, likely for wall mounting.

Step 15: Place Shelves

Place the remaining shelves into the unit.

Step 16: Install Shelf Supports

Install six (6x) shelf supports (parts like 10069893, 10072313, 10072300) into the frame at the desired heights.

Step 17: Connect Multiple Units

If connecting multiple ENHET units, use the provided connectors (2x) (parts like 10044491, 10044738, 10051019) as shown.

Step 18: Attach Bottom Caps

Attach eight (8x) caps or feet (parts like 10045539, 10048814, 10051037) to the bottom of the unit for stability and floor protection.