EPOMAKER TH96 Quick Start Guide

Product Overview

EPOMAKER TH96

1800 Compact Wired/Wireless Mechanical Keyboard

This Quick Guide is an introduction to the use and functionality of the EPOMAKER TH96. For software downloads, please visit the official EPOMAKER website at epomaker.com/pages/software-downloads.

For assistance, please email support@epomaker.com.

Specifications

Manufacturer: Shenzhen Changyun Technology Co., Ltd.
Address: Seventh Floor, Kai Daer Building, No.168 Tongsha Road, Xili Street, Nanshan District, Shenzhen, Guangdong, CN

EU Representative: APEX CE SPECIALISTS LIMITED
Address: UNIT 3D NORTH POINT HOUSE, NORTH POINT BUSINESS PARK, NEW MALLOW ROAD CORK, T23 AT2P, IRELAND

Keyboard Layout Description

The EPOMAKER TH96 features an 1800 compact layout, offering a full 96-key experience with a dedicated navigation cluster and arrow keys, while maintaining a reduced footprint. A rotary encoder is located on the top right for volume control or other functions.

Functionality & Connectivity

RGB Effects

Pressing FN + L simultaneously allows you to cycle through the RGB lighting effects of your EPOMAKER TH96 keyboard.

Bluetooth Pairing

To pair a Bluetooth device:

• Long Press (3 seconds): Press and hold FN + 1/2/3 for 3 seconds to initiate pairing. The keyboard's indicator light will flash. If no connection is established, the keyboard will enter sleep mode.
• Short Press: Press FN + 1/2/3 briefly to switch to the last paired device.

2.4GHz Wireless Pairing

To connect via 2.4GHz wireless:

1. Turn on the keyboard using the switch on its bottom.
2. Plug the USB receiver into your device.
3. Once recognized by your device, press and hold FN + 4 for 3 seconds. The backlight of the '4' key will flash.
4. When the LED stays green, the pairing is successful.

Bluetooth & 2.4GHz Specifications

The operating system should be Windows 8 or above to support Bluetooth functionality. For Bluetooth 5.0, the device must support Bluetooth 5.0 or a higher version.

Keyboard Wake/Sleep

If your keyboard is in sleep mode, press any key to wake it up. It will automatically reconnect to the last used device.

Connection Status Indicator

Keyboard Power On:

• Green Light ON: Indicates a 2.4GHz wireless connection.
• Blue Light ON: Indicates the keyboard is connected to the last paired Bluetooth device.
• No Lights: Indicates no device is paired. Try pairing your device again.

Keyboard Shortcuts

System Mode Switching

If you switch between devices or operating systems (Windows/macOS), ensure you press FN + W to switch to Windows mode or FN + M to switch to macOS mode. This ensures proper keyboard layout and function for multimedia keys.

Windows Shortcuts

• FN + W: Long press 3s to Switch to Windows mode
• FN + F1: Screen Brightness -
• FN + F2: Screen Brightness +
• FN + F3: Task View
• FN + F4: My Computer
• FN + F5: Email
• FN + F6: Homepage
• FN + F7: Last Song
• FN + F8: Play / Pause
• FN + F9: Next Song
• FN + F10: Mute
• FN + F11: VOL -
• FN + F12: VOL +

macOS Shortcuts

• FN + M: Long press 3s to Switch to macOS mode
• F1: Screen Brightness -
• F2: Screen Brightness +
• F3: Task Control
• F4: Call Siri
• F5: -
• F6: -
• F7: Last Song
• F8: Play / Pause
• F9: Next Song
• F10: Mute
• F11: VOL -
• F12: VOL +

General Function Shortcuts

• FN + 1: Bluetooth Device 1
• FN + 2: Bluetooth Device 2
• FN + 3: Bluetooth Device 3
• FN + 4: 2.4GHz Wireless
• FN + 5: Wired
• CTRL + ALT + ESC: Long press 3s to restore the default setting
• FN + BACKSPACE: Turn on/off the RGB
• FN + L: Toggle the light mode
• FN + ↑: Backlight Brightness +
• FN + ↓: Backlight Brightness -
• FN + ←: Backlight Effect Speed -
• FN + →: Backlight Effect Speed +
• FN + C: Toggle the backlight color
• FN + B: Check Battery Status (In Wireless Mode)
• FN + WIN: Lock/Unlock Windows Key
• FN + D: Toggle backlight direction

Maintenance: Replacing Keycaps and Switches

For a full guide, visit epomaker.com/blogs/guides/diy-guide-how-to-remove-and-replace-your-mechanical-keyboard-switches.

Important Note: Before installing switches, ensure the pins are clean and straight. ⚠️

Included Tools

The package includes a Switch Puller and a Keycap Puller.

Removing Switches

A diagram shows the included tools and a mechanical switch. The switch puller tool is designed to align vertically with the switch to unclip the plastic securing it to the plate.

1. Grip the switch vertically with the Switch Removal Tool.
2. Apply pressure with the Switch Puller until the switch releases from the plate.
3. Pull the switch away from the keyboard using a firm but gentle vertical motion.

Installing Switches

A diagram illustrates pushing a switch straight down. Ensure pins are aligned with the slots. Be gentle. ⚠️

1. Check that all switch metallic pins are perfectly straight and clean.
2. Align the switch vertically, ensuring the Gateron logo faces north. The pins should align with the keyboard PCB.
3. Press the switch down until you hear a click, indicating the clips have attached to the keyboard plate.
4. Inspect the switch to ensure it is properly attached and test it.

Note: If a key doesn't work, a switch may have been bent during installation. Remove and repeat the process. Pins can be damaged beyond repair. Never apply excessive force. Contact customer service if you encounter issues.

Support & Warranty

Technical Assistance

For technical assistance, email support@epomaker.com with your purchase order number and a detailed description of your issue. Responses are typically provided within 24 hours. If purchased from a distributor, contact them directly.

Community Forums

Join the community to learn and share with other enthusiasts:

• Discord: discord.gg/2q3Z7C2
• Reddit: reddit.com/user/epomaker/

Warranty Information

EPOMAKER's warranty covers factory defects affecting functionality, but not normal wear and tear. Defective products will be replaced. Replacement may require returning the defective unit.

A 1-year warranty is provided for products purchased directly from EPOMAKER.com. This warranty is void if the product shows signs of modification, unauthorized assembly, or component replacement. The warranty is only valid for items purchased from official EPOMAKER stores. For items bought from resellers, contact the reseller for support.