EPOMAKER TH98 Quick Start Guide
Product Overview
The EPOMAKER TH98 is an 1800 Compact Wired/Wireless Mechanical Keyboard. This Quick Guide provides an introduction to its use and functionality. For a more in-depth guide to the customization software, please refer to the manual available on the official Epomaker website at epomaker.com/pages/software-downloads. For assistance, please email support@epomaker.com.
Specifications:
- Model: EPOMAKER TH98
- Size: 385 x 140 x 30mm
- NKRO: Yes
- Hotswap: Yes
- Keycaps: PBT
- System: Windows / Mac
- Layout: 98 Keys
- Connection: USB-C, 2.4GHz Bluetooth 3.0, Bluetooth 5.0
- Weight: 1140g ± 50g
Manufacturer: Shenzhen Changyun Technology Co., Ltd. (Made in China)
EU Representative: APEX CE SPECIALISTS LIMITED, UNIT 3D NORTH POINT HOUSE, NORTH POINT BUSINESS PARK, NEW MALLOW ROAD CORK, T23 AT2P, IRELAND
Features and Shortcuts
RGB Effects
Pressing Fn + Del simultaneously allows you to switch the RGB effect of your TH98 Keyboard.
Bluetooth Pairing
- Pairing: Long press Fn + 1/2/3 for 3 seconds to pair a Bluetooth device.
- Switching Devices: Short press Fn + 1/2/3 to switch to the last paired device.
Holding Fn + 1/2/3 for 3 seconds initiates pairing, indicated by a flashing light. If no connection is made, the keyboard enters sleep mode.
Wireless 2.4GHz Pairing
1. Turn on the keyboard using the switch on the bottom. 2. Plug the 2.4GHz receiver into your device. 3. After recognition, press Fn + 4. The backlight of the '4' key will flash. 4. When the LED stays green, pairing is successful.
Bluetooth & Wireless 2.4GHz Specifications
The operating system should be Windows 8 or above for Bluetooth functionality. The device should support Bluetooth 5.0 or a higher version to use Bluetooth 5.0.
Keyboard Shortcuts
If you switch devices or systems, press Fn + A/S to switch the keyboard layout according to the system used. Otherwise, some shortcuts/multimedia keys may not work properly.
System Switching:
- Fn + A: Switch to Windows Mode
- Fn + S: Switch to macOS Mode
Function Keys (F1-F12) & Media Controls:
(Consolidated from various language versions)
- Fn + F1: Player / Brightness -
- Fn + F2: Volume - / Brightness -
- Fn + F3: Volume + / Brightness +
- Fn + F4: Mute / Task Control
- Fn + F5: Stop / Control Center
- Fn + F6: Last Song / -
- Fn + F7: Play/Pause / Last Song
- Fn + F8: Next Song / Play/Pause
- Fn + F9: Email / Next Song
- Fn + F10: Homepage / Mute
- Fn + F11: Calculator / Volume -
- Fn + F12: Search / Volume +
- Fn + Win: Lock/Unlock Windows Key
General Function Shortcuts:
- Fn + 1: Bluetooth Device 1
- Fn + 2: Bluetooth Device 2
- Fn + 3: Bluetooth Device 3
- Fn + 4: 2.4GHz Wireless
- Fn + 5: Wired
- Fn + Esc: Long press 3s to restore default settings.
- Fn + Backspace: Enter/exit custom backlight recording mode.
Backlight Controls:
- Fn + ↑: Backlight Brightness +
- Fn + ↓: Backlight Brightness -
- Fn + ←: Backlight Effect Speed -
- Fn + →: Backlight Effect Speed +
- Fn + Del: Toggle light mode
- Fn + Ins: Toggle backlight direction
- Fn + PgUp: Toggle backlight color
- Fn + PgDn: White backlight on
Keyboard Wake/Sleep
If your keyboard is sleeping, press any key to wake it up. It will remember the last device connected.
Wake/Sleep Status:
- Keyboard Power On:
- Green Light ON: Wireless 2.4GHz connected
- Blue Light ON: Keyboard connected to the last paired Bluetooth device
- No Light: No device paired. Try pairing your device again.
Replacing Keycaps and Switches
For a full guide on how to remove and replace keycaps and switches, visit: epomaker.com/blogs/guides/diy-guide-how-to-remove-and-replace-your-mechanical-keyboard-switches
Tools Included:
- Switch Puller
- Keycap Puller
Before installing switches: Ensure the pins are clean and straight.
Removing Switches:
- Grip your Switch Removal Tool and align the gripping teeth vertically (on the Y-Axis) at the center of the switch.
- Grip the switch with the Switch Puller and apply pressure until the switch releases itself from the plate.
- Using firm but gentle force, pull the switch away from the keyboard using a vertical motion.
The Switch Puller tool aligns vertically to the Switch to unclip the plastic securing the switch to the plate.
Installing Switches:
- Check that all switch metallic pins are perfectly straight and clean.
- Align the switch vertically so the Gateron logo faces north. The pins should align with the keyboard PCB.
- Press the switch down until you hear a click, indicating the clips have attached to the keyboard plate.
- Inspect the switch to ensure it's properly attached and test it.
Note: If a key doesn't work, you may have bent a switch during installation. Pull the switch out and repeat the process. Pins can be damaged beyond repair. Never apply excessive force. Contact customer service if you encounter issues.
Technical Assistance
For technical assistance, please email support@epomaker.com with your purchase order number and a detailed description of your issue. Responses are typically within 24 hours. If you purchased from a distributor, contact them directly.
Community Forums
Join the community and learn with other keyboard enthusiasts:
- Discord: discord.gg/2q3Z7C2
- Reddit: reddit.com/user/epomaker/
Warranty
EPOMAKER's warranty covers factory defects affecting proper functionality, but not normal wear and tear. Defective products will be replaced; you may need to return the original unit.
A 1-year warranty is provided for products purchased on epomaker.com. This warranty is void if the product shows signs of modification or alteration (e.g., changing internal components, assembly, battery replacement).
Warranty is only valid for purchases made through official Epomaker stores. For purchases from other resellers, please contact the reseller directly for support.
