CR06-W Crown Series Wide Angle Version

Product Overview

The CR06-W is part of the Crown Series, offering a wide-angle LED warning light solution. It is designed for versatile installation and provides enhanced visibility. The lighthead is a compact, rectangular unit with a clear lens, designed to emit bright warning light.

Features

• Unique 6-LED optic design for wide-angle warning and expanded visibility.
• 4 units provide 270-degree warning coverage, approved to ECE R65 Cat. HT Class 2 (Blue) and Class 1 (Amber). ECE R65 HTR2 certification may be available upon request for specific quantities.
• A single head offers 120-degree warning coverage meeting SAE J845 Class 1.
• Pop-n-Lock: Quick, one-step installation with a snap-on grommet design.
• Features independent cruise mode (steady burn, low intensity).
• All-in-one, self-contained unit for easy installation without an external flasher.
• Supports multi-unit synchronization in simultaneous or alternating flash patterns.
• Includes reverse polarity protection.
• Weatherproof and vibration-resistant design suitable for external or internal use.

Specifications

Compliance: ECE R65 Cat. HT Class 2 (Blue), Class 1 (Amber); ECE R10; SAE J595 Class 1; SAE J845 Class 1 (120° Blue & Red; 110° Amber & White).

IP Rating: IPX7

LED Elements: 6 high-power LEDs per head.

No. of Warning Patterns: 17

Operating Voltage: 12~24VDC

Current Draw (Avg.): 0.84A @12VDC / 0.42A @24VDC (varies with flash pattern)

Power Consumption (Avg.): 10.0 Watts (varies with flash pattern)

Current Draw (Max.): 1.68A @12VDC / 0.81A @24VDC

Power Consumption (Max.): 20.2 Watts

Wiring:

• Red: +VE (21cm, 0.5mm², 24AWG)
• Black: -VE (21cm, 0.5mm², 24AWG)
• White: Low Power Operation (21cm, 0.5mm², 24AWG)
• Green: Cruise Mode (21cm, 0.5mm², 24AWG)
• Yellow: Flash Patterns & Sync (21cm, 0.5mm², 24AWG)

Recommended Fuse: 3A

Multi-Unit Synchronization: Up to 20 heads (5 sets of 4)

LED Colour Options: Red, Blue, Amber, or White

Lens Colour: Clear

Storage Temperature: -40°C to +75°C

Working Temperature: -30°C to +65°C

Dimensions

Without L-bracket:

Height: 36.6mm (1.44 inches)

Width: 40.25mm (1.58 inches)

Depth: 34mm (1.34 inches)

Mounting hole diameter: 4.5mm (0.17 inches)

With L-bracket:

Height: 42.5mm (1.67 inches)

Width: 42.3mm (1.66 inches)

Depth: 20mm (0.78 inches)

Recommended panel thickness for mounting: 1.5mm to 4.0mm

Flash Patterns

* Actual approval will be based on the model ordered.

** For use with external flasher controller.

Part Numbers and Accessories

Part Numbers:

• 4 Unit Package: 02060682 (ECE R10 & R65 HTA1), 02060699 (ECE R10 & R65 HTB2), F016-9131W-000 (ECE R10)
• 1 Unit Package: F016-7130x-000 (SAE)
• Replace 'x' for color: R = Red, B = Blue, A = Amber, W = White

Accessories:

• 02060620 (L-Bracket Mounting Kit)

Approved Mounting Position

To meet ECE R65 Cat. HT approval, lightheads must be installed in a set of four units. Position the lightheads within the specified dimensions and angles for compliance.

Category 'HT' - 270° Warning Coverage:

The setup requires four lightheads positioned around the vehicle's central axis. The central axis of each lamp should be placed with specific angular and distance constraints to achieve the 270-degree coverage. For example, two lamps are positioned at 90 degrees relative to the vehicle's central axis, with their central axes within 1 meter (3.28 ft) of the vehicle's central axis. Another lamp is positioned further out, up to 10 meters (32.8 ft) away, also at a 90-degree angle relative to the vehicle's central axis. The fourth lamp is positioned similarly to the first two.

Application Examples:

Front of the Vehicle: Illustrates the 270-degree coverage from the front view, showing the lightheads positioned to cover a wide area.

Rear of the Vehicle: Illustrates the 270-degree coverage from the rear view, demonstrating the spread of the warning lights.