Blaupunkt Self-Inflatable Screen
Model: BPS1080WPS
Support: info@ayonz.com
Package Contents
- 1 x Detachable Movie Screen
- 1 x Inflatable Frame
- 1 x Carry Bag
- 1 x User Manual
- 6 x Tie Down Ropes
- 6 x Tether Stakes
- 1 x Self-Inflatable Blower
Specifications
Specification | Details |
---|---|
Screen Size | 117" (inches) |
Aspect Ratio | 16:9 |
Viewing Angle | 160 Degree |
Frame Material | Oxford Cloth |
Screen Material | Cloth |
Movie Screen | Detachable |
How to Inflation?
Step 1: Preparation
Remove contents from packaging and lay out the product in a clear, flat area. Ensure the inflatable frame is positioned with the white movie screen facing up.
Diagram: Inflatable frame laid out flat with the white screen material facing upwards.
Step 2: Air Mover Placement
Locate the air mover (blower) and place it away from anything that might obstruct its fan.
Diagram: Air mover positioned on the ground.
Step 3: Inflation
Plug the cord into an outlet to inflate the item. This process may take a few minutes. Ensure the air intake is clear of fabric or other obstructions and the zipper is fully closed.
Diagram: Air mover plugged in and inflating the screen frame. A zipper is visible on the frame.
Step 4: Positioning
Stand the item upright, ensuring the air mover is away from obstructions.
Diagram: Fully inflated screen frame standing upright.
Step 5: Securing (Outdoor Use)
For outdoor use, tie the ropes through each of the 6 anchor points and secure them with stakes.
Diagram: Ropes attached to anchor points on the screen frame and stakes hammered into the ground.
How to Deflate and Store?
Step 1: Deflation
Remove the plug and open the zipper to release air.
Diagram: Hand opening a zipper on the inflatable frame.
Step 2: Flattening
Flatten the screen with the white movie screen cloth facing up to avoid dirt.
Diagram: Screen being flattened.
Step 3: Folding
Fold the screen in half 3 times vertically.
Diagram: Screen being folded.
Step 4: Storage
Place the folded screen into the carry bag.
Diagram: Item being placed into a carry bag.
Product Care
- Before using and reusing, inspect the product carefully.
- Do not mount or place near gas or electric heaters, fireplaces, candles, or other similar sources of heat.
- Unplug the product when not in use. Store neatly in a cool, dry location protected from sunlight.
- Do not place it where small children can reach it.
- Do not hang ornaments or other objects from the cord or wire.
- Protect the electric fan and power cord from direct exposure to water. This precaution will reduce the risk of electrical shock.
- When the temperature is below 10°F (-14°C), the motor may temporarily stop running. The motor will begin functioning again in higher temperatures.
- Do not attempt to inflate the item during unusually strong winds. If it becomes too windy for safe operation, allow the item to deflate and wait for better conditions before re-inflating.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.
- If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.