FITUEYES FT 78 CANTOR Floor TV Stand Installation Guide

What's in the box

• Part A x1: Base component
• Part B x11: Various screws and hardware (e.g., Bx6, Bx4, Bx1)
• Part C x1: Pole component
• Part D x1: Pole component

Diagrams show the main stand components including the base, pole sections, and TV mounting bracket.

Accessories for installing TV

• M-A x4: M4x14 screws
• M-B x4: M4x30 screws
• M-C x4: M5x14 screws
• M-D x4: M6x14 screws
• M-E x4: M6x30 screws
• M-F x4: M8x30 screws
• M-G x4: M8x50 screws
• M-H x4: Washers (approx. 12.5mm diameter)
• M-I x8: Washers (approx. 15mm diameter)
• M-J x8: Washers (approx. 15mm diameter)

Diagrams illustrate various screws and washers provided for attaching the TV to the mounting bracket.

Assembly Instructions

Step 1: Attach the base (Part 1) to the lower pole section (Part 3) using six Bx6 screws.

Step 2: Attach the TV mounting bracket (Part 2) to the upper pole section (Part C) using four Bx4 screws.

Step 3: Secure support plate 5-A to the pole section using four M-A x4 screws.

Step 4: Secure support plate 5-B to the pole section using four M-B x4 screws.

Step 5: Connect part 6 to support plates 5-A and 5-B using four M-C x4 screws.

Step 6: Attach part 7 to part 6 using four M-D x4 screws.

Step 7: Assemble the base (Part 1) with the main pole section (Part 4) using four Bx4 screws.

Step 8: Attach part 6 to the main pole section (Part 4) using one Bx1 screw.

Step 9: Shows disassembly of bracket components (2a, 2b, 2c).

Step 10: Prepare the TV for mounting. Select appropriate screws from M-A to M-G to attach the TV mounting plate (7a) to the four screw holes on the back of the TV.

Step 11: TV Mounting Methods: Method A1: For TVs with a flat back, use screws without washers. Method A2: For TVs with an uneven back, use screws with washers (M-H to M-J). Washers can be stacked as needed.

Step 12: Attach the TV, with the mounting plate (7a) secured, to the stand's main bracket.

Step 13: Slide the TV bracket assembly onto the main pole.

Step 14: Secure the TV bracket to the pole using the provided hardware.

Step 15: Adjust the height of the TV bracket on the pole to the desired position.

Step 16: Tighten the height adjustment mechanism to lock the TV in place.

Step 17: Final check of the TV mounted securely on the stand.

Step 18: Final check of the overall stand assembly.

Step 19: Visual representation of the fully assembled FITUEYES FT 78 CANTOR Floor TV Stand with a TV mounted.