Siemens SIMATIC S7-1200

Digital I/O Module

Model: 6ES7223-1BL32-0XB0

Description: SIMATIC S7-1200, Digital I/O SM 1223, 16 DI/16 DO, 16 DI 24 V DC, Sink/Source, 16 DO, transistor 0.5 A

Figure similar

General Information

Product Type Designation SM 1223, DI 16x24 V DC, DQ 16x24 V DC

Supply Voltage

Rated Value (DC) 24 V
Permissible Range, Lower Limit (DC) 20.4 V
Permissible Range, Upper Limit (DC) 28.8 V

Input Current

From Backplane Bus 5 V DC, max. 185 mA

Digital Inputs

From Load Voltage L+ (without load), max. 4 mA; per channel
Supply Voltage of the Transmitters / Header Yes
Power Loss, typ. 4.5 W
Number of Digital Inputs 16
In Groups Of 2
Input Characteristic Curve In accordance with IEC 61131, type 1
Number of Simultaneously Controllable Inputs 16
All Mounting Positions (up to 40 °C, max.) 16
Horizontal Installation (up to 40 °C, max.) 16
Horizontal Installation (up to 50 °C, max.) 16
Vertical Installation (up to 40 °C, max.) 16
Type of Input Voltage DC
Rated Value (DC) 24 V
For Signal "0" 5 V DC at 1 mA
For Signal "1" 15 V DC at 2.5 mA
Input Current for Signal "0", max. (permissible quiescent current) 1 mA
Input Current for Signal "1", min. 2.5 mA
Input Current for Signal "1", typ. 4 mA
Input Delay (for rated value of input voltage) Yes; 0.2 ms, 0.4 ms, 0.8 ms, 1.6 ms, 3.2 ms, 6.4 ms and 12.8 ms, selectable in groups of four for interrupt inputs.

Cable Length

Shielded, max. 500 m
Unshielded, max. 300 m

Digital Outputs

Number of Digital Outputs 16
In Groups Of 1
Short-Circuit Protection No; to be provided externally
Limitation of Inductive Shutdown Voltage To L+ (-48 V)
Switching Capacity of the Outputs (with resistive load, max.) 0.5 A
Switching Capacity of the Outputs (on lamp load, max.) 5 W
Output Voltage Rated Value (DC) 24 V
Output Voltage for Signal "0", max. 0.1 V; with 10 kOhm load
Output Voltage for Signal "1", min. 20 V DC
Output Current for Signal "1" Rated Value 0.5 A
Output Current for Signal "1" Permissible Range, max. 0.5 A
Output Current for Signal "0" Residual Current, max. 10 µA
Output Delay with Resistive Load ("0" to "1", max.) 50 µs
Output Delay with Resistive Load ("1" to "0", max.) 200 µs
Total Current of the Outputs (per group) Horizontal Installation (up to 50 °C, max.) 8 A; Current per mass

Relay Outputs

Switching Capacity of Contacts (with inductive load, max.) 0.5 A
Switching Capacity of Contacts (on lamp load, max.) 5 W
Switching Capacity of Contacts (with resistive load, max.) 0.5 A
Cable Length Shielded, max. 500 m
Cable Length Unshielded, max. 150 m

Interrupts/Diagnostics/Status Information

Alarms: Diagnostic Alarm Yes
Diagnostics Indication LED: For Status of the Inputs Yes
Diagnostics Indication LED: For Status of the Outputs Yes

Potential Separation

Potential Separation Digital Inputs: Between the Channels, in Groups of 2
Potential Separation Digital Outputs: Between the Channels, in Groups of 1
Potential Separation Digital Outputs: Between the Channels and Backplane Bus 500 V AC

Degree and Class of Protection

IP Degree of Protection IP20

Standards, Approvals, Certificates

CE Mark Yes
CSA Approval Yes
UL Approval Yes
cULus Yes
FM Approval Yes
RCM (formerly C-TICK) Yes
KC Approval Yes
Marine Approval Yes
Ecological Footprint Yes

Environmental Conditions

Global Warming Potential

Global Warming Potential, (Total) [CO2 eq] 123 kg
Global Warming Potential, (During Production) [CO2 eq] 12.1 kg
Global Warming Potential, (During Operation) [CO2 eq] 111 kg
Global Warming Potential, (After End of Life Cycle) [CO2 eq] -0.434 kg

Ambient Conditions

Free Fall: Fall Height, max. 0.3 m; five times, in product package
Ambient Temperature During Operation: Min. -20 °C
Ambient Temperature During Operation: Max. 60 °C
Ambient Temperature During Operation: Horizontal Installation, Min. -20 °C
Ambient Temperature During Operation: Horizontal Installation, Max. 60 °C
Ambient Temperature During Operation: Vertical Installation, Min. -20 °C
Ambient Temperature During Operation: Vertical Installation, Max. 50 °C
Permissible Temperature Change 5 °C to 55 °C, 3 °C / minute
Ambient Temperature During Storage/Transportation: Min. -40 °C
Ambient Temperature During Storage/Transportation: Max. 70 °C
Air Pressure acc. to IEC 60068-2-13: Storage/Transport, Min. 660 hPa
Air Pressure acc. to IEC 60068-2-13: Storage/Transport, Max. 1 080 hPa
Relative Humidity: Operation at 25 °C without condensation, max. 95 %

Connection Method & Mechanics/Material

Connection Method: Required Front Connector Yes
Mechanics/Material: Enclosure Material (Front) Plastic

Dimensions & Weight

Width 70 mm
Height 100 mm
Depth 75 mm
Weight, approx. 310 g

Classifications

eClass

VersionClassification
1427-24-22-04
1227-24-22-04
9.127-24-22-04
927-24-22-04
827-24-22-04
7.127-24-22-04
627-24-22-04

ETIM

VersionClassification
10EC001419
9EC001419
8EC001419
7EC001419

IDEA

VersionClassification
43566

UNSPSC

VersionClassification
1532-15-17-05

Approvals / Certificates

General Product Approval:

PDF preview unavailable. Download the PDF instead.

f499f8695041e57795adc91f2313f4cc6b513077 Conplement Ag

Related Documents

Preview SIMATIC S7-1500 / ET 200MP Digital Input/Output Module DI 16x24VDC/DQ 16x24VDC/0.5A BA (6ES7523-1BL00-0AA0) Manual
This manual provides detailed technical specifications, wiring diagrams, address space configurations, diagnostics information, and dimensional drawings for the Siemens SIMATIC S7-1500 / ET 200MP Digital Input/Output Module, model number 6ES7523-1BL00-0AA0. It covers its properties, configuration options, and operational status indicators.
Preview Hoja de datos Siemens SIMATIC S7-1200 SM 1231 TC - Módulo de Entradas Analógicas
Información técnica detallada para el módulo de entradas analógicas Siemens SIMATIC S7-1200 SM 1231 TC (6ES7231-5QD32-0XB0), incluyendo especificaciones eléctricas, rangos de entrada, precisión, condiciones ambientales y homologaciones.
Preview Siemens S7-1200 System Manual Update 01/2015: Corrections and New Information
This document provides crucial updates and corrections for the Siemens S7-1200 Programmable Controller System Manual, edition 01/2015, covering topics like Profibus communication, error conditions, wiring, firmware updates, and CE approvals.
Preview Siemens SIMATIC S7-1200 CPU 1214C DC/DC/DC Datasheet (6ES7214-1AG40-0XB0)
Comprehensive datasheet for the Siemens SIMATIC S7-1200 CPU 1214C DC/DC/DC (6ES7214-1AG40-0XB0), detailing technical specifications, supply voltage, memory, I/O, communication protocols, environmental conditions, and approvals.
Preview Siemens Industrial Electrical Components Catalog
Comprehensive technical specifications for Siemens industrial, commercial, and building electrical components, including automation, power, protection, control, and signaling devices.
Preview Siemens CMS X-Tools User Manual for SIMATIC S7-1200/1500 Controllers
This user manual provides comprehensive guidance on installing, configuring, and operating Siemens CMS X-Tools with SIMATIC S7-1200 and S7-1500 industrial automation controllers. Learn about system integration, data acquisition, and communication setup for condition monitoring.
Preview Siemens Lista de Precios Productos Eléctricos Industriales Julio 2025
Catálogo de precios de Siemens para productos eléctricos industriales, incluyendo automatización industrial, variadores de velocidad SINAMICS, sistemas de alimentación SITOP, instrumentación de procesos, aparatos de maniobra, protección y seccionamiento de sistemas de distribución, y el programa de formación SITRAIN.
Preview Siemens SIMATIC S7-1200F CPU 1215 FC Datasheet
Detailed technical datasheet for the Siemens SIMATIC S7-1200F CPU 1215 FC (6ES7215-1AF40-0XB0). Covers general information, supply and load voltage, input/output current, memory, processing times, communication interfaces (PROFINET, Ethernet), EMC, safety standards, ambient conditions, dimensions, and weights.