SIOS
Industry Bilddatenbank V4.25
STEROWNIK SIMATIC S7-1200 CPU 1214C DC/DC/DC 6ES7214-1AG40-0XB0 SIEMENS
File Info : application/pdf, 7 Pages, 199.53KB
DocumentDocumentData sheet 6ES7214-1AG40-0XB0 SIMATIC S7-1200, CPU 1214C, compact CPU, DC/DC/DC, onboard I/O: 14 DI 24 V DC; 10 DO 24 V DC; 2 AI 0-10 V DC, Power supply: DC 20.4-28.8V DC, Program/data memory 100 KB General information Product type designation Firmware version Engineering with Programming package Supply voltage Rated value (DC) 24 V DC permissible range, lower limit (DC) permissible range, upper limit (DC) Reverse polarity protection Load voltage L+ Rated value (DC) permissible range, lower limit (DC) permissible range, upper limit (DC) Input current Current consumption (rated value) Current consumption, max. Inrush current, max. I²t Output current for backplane bus (5 V DC), max. Encoder supply 24 V encoder supply 24 V Power loss Power loss, typ. Memory Work memory integrated Load memory integrated Plug-in (SIMATIC Memory Card), max. Backup present maintenance-free without battery CPU processing times for bit operations, typ. 6ES72141AG400XB0 Page 1/7 CPU 1214C DC/DC/DC V4.5 STEP 7 V17 or higher Yes 20.4 V 28.8 V Yes 24 V 20.4 V 28.8 V 500 mA; CPU only 1 500 mA; CPU with all expansion modules 12 A; at 28.8 V 0.5 A²·s 1 600 mA; Max. 5 V DC for SM and CM L+ minus 4 V DC min. 12 W 100 kbyte 4 Mbyte with SIMATIC memory card Yes Yes Yes 0.08 µs; / instruction 6/29/2023 Subject to change without notice © Copyright Siemens for word operations, typ. for floating point arithmetic, typ. CPU-blocks Number of blocks (total) OB Number, max. Data areas and their retentivity Retentive data area (incl. timers, counters, flags), max. Flag Size, max. Local data per priority class, max. Address area Process image Inputs, adjustable Outputs, adjustable Hardware configuration Number of modules per system, max. Time of day Clock Hardware clock (real-time) Backup time Deviation per day, max. Digital inputs Number of digital inputs of which inputs usable for technological functions Source/sink input Number of simultaneously controllable inputs all mounting positions -- up to 40 °C, max. Input voltage Rated value (DC) for signal "0" for signal "1" Input delay (for rated value of input voltage) for standard inputs -- parameterizable -- at "0" to "1", min. -- at "0" to "1", max. for interrupt inputs -- parameterizable for technological functions -- parameterizable Cable length shielded, max. unshielded, max. Digital outputs Number of digital outputs of which high-speed outputs Limitation of inductive shutdown voltage to Switching capacity of the outputs with resistive load, max. on lamp load, max. Output voltage for signal "0", max. for signal "1", min. Output current 6ES72141AG400XB0 Page 2/7 1.7 µs; / instruction 2.3 µs; / instruction DBs, FCs, FBs, counters and timers. The maximum number of addressable blocks ranges from 1 to 65535. There is no restriction, the entire working memory can be used Limited only by RAM for code 14 kbyte 8 kbyte; Size of bit memory address area 16 kbyte; Priority class 1 (program cycle): 16 KB, priority class 2 to 26: 6 KB 1 kbyte 1 kbyte 3 comm. modules, 1 signal board, 8 signal modules Yes 480 h; Typical ±60 s/month at 25 °C 14; Integrated 6; HSC (High Speed Counting) Yes 14 24 V 5 V DC at 1 mA 15 V DC at 2.5 mA 0.2 ms, 0.4 ms, 0.8 ms, 1.6 ms, 3.2 ms, 6.4 ms and 12.8 ms, selectable in groups of four 0.2 ms 12.8 ms Yes Single phase: 3 @ 100 kHz & 3 @ 30 kHz, differential: 3 @ 80 kHz & 3 @ 30 kHz 500 m; 50 m for technological functions 300 m; for technological functions: No 10 4; 100 kHz Pulse Train Output L+ (-48 V) 0.5 A 5 W 0.1 V; with 10 kOhm load 20 V 6/29/2023 Subject to change without notice © Copyright Siemens for signal "1" rated value for signal "0" residual current, max. Output delay with resistive load "0" to "1", max. "1" to "0", max. Switching frequency of the pulse outputs, with resistive load, max. Relay outputs Number of relay outputs Cable length shielded, max. unshielded, max. Analog inputs Number of analog inputs Input ranges Voltage Input ranges (rated values), voltages 0 to +10 V -- Input resistance (0 to 10 V) Cable length shielded, max. Analog outputs Number of analog outputs Analog value generation for the inputs Integration and conversion time/resolution per channel Resolution with overrange (bit including sign), max. Integration time, parameterizable Conversion time (per channel) Encoder Connectable encoders 2-wire sensor 1. Interface Interface type Isolated automatic detection of transmission rate Autonegotiation Autocrossing Interface types RJ 45 (Ethernet) Number of ports integrated switch Protocols PROFINET IO Controller PROFINET IO Device SIMATIC communication Open IE communication Web server Media redundancy PROFINET IO Controller Transmission rate, max. Services -- PG/OP communication -- Isochronous mode -- IRT -- PROFIenergy -- Prioritized startup -- Number of IO devices with prioritized startup, max. -- Number of connectable IO Devices, max. -- Number of connectable IO Devices for RT, max. -- of which in line, max. 0.5 A 0.1 mA 1 µs 5 µs 100 kHz 0 500 m 150 m 2 Yes Yes 100k ohms 100 m; twisted and shielded 0 10 bit Yes 625 µs Yes PROFINET Yes Yes Yes Yes Yes 1 No Yes Yes Yes Yes; Optionally also encrypted Yes No 100 Mbit/s Yes; encryption with TLS V1.3 pre-selected No No No Yes 16 16 16 16 6ES72141AG400XB0 Page 3/7 6/29/2023 Subject to change without notice © Copyright Siemens -- Activation/deactivation of IO Devices -- Number of IO Devices that can be simultaneously activated/deactivated, max. -- Updating time PROFINET IO Device Services -- PG/OP communication -- Isochronous mode -- IRT -- PROFIenergy -- Shared device -- Number of IO Controllers with shared device, max. Protocols Supports protocol for PROFINET IO PROFIsafe PROFIBUS OPC UA AS-Interface Protocols (Ethernet) TCP/IP DHCP SNMP DCP LLDP Redundancy mode Media redundancy -- MRP -- MRPD SIMATIC communication S7 routing Open IE communication TCP/IP -- Data length, max. ISO-on-TCP (RFC1006) -- Data length, max. UDP -- Data length, max. Web server supported User-defined websites OPC UA Runtime license required OPC UA Server -- Application authentication -- User authentication -- Number of sessions, max. -- Number of subscriptions per session, max. -- Sampling interval, min. -- Publishing interval, min. -- Number of server methods, max. -- Number of monitored items, recommended max. -- Number of server interfaces, max. -- Number of nodes for user-defined server interfaces, max. Further protocols MODBUS communication functions / header S7 communication supported Yes 8 The minimum value of the update time also depends on the communication component set for PROFINET IO, on the number of IO devices and the quantity of configured user data. Yes; encryption with TLS V1.3 pre-selected No No Yes Yes 2 Yes No Yes; CM 1243-5 (master) or CM 1242-5 (slave) required Yes; OPC UA Server Yes; CM 1243-2 required Yes No Yes Yes Yes No No Yes Yes 8 kbyte Yes 8 kbyte Yes 1 472 byte Yes Yes Yes; "Basic" license required Yes; data access (read, write, subscribe), method call, runtime license required Available security policies: None, Basic128Rsa15, Basic256Rsa15, Basic256Sha256 "anonymous" or by user name & password 10 5 100 ms 200 ms 20 1 000 2 2 000 Yes Yes 6ES72141AG400XB0 Page 4/7 6/29/2023 Subject to change without notice © Copyright Siemens as server Yes as client Yes User data per job, max. See online help (S7 communication, user data size) Number of connections overall PG Connections: 4 reserved / 4 max; HMI Connections: 12 reserved / 18 max; S7 Connections: 8 reserved / 14 max; Open User Connections: 8 reserved / 14 max; Web Connections: 2 reserved / 30 max; OPC UA Connections: 0 reserved / 10 max; Total Connections: 34 reserved / 64 max Test commissioning functions Status/control Status/control variable Yes Variables Inputs/outputs, memory bits, DBs, distributed I/Os, timers, counters Forcing Forcing Yes Diagnostic buffer present Yes Traces Number of configurable Traces 2 Memory size per trace, max. 512 kbyte Interrupts/diagnostics/status information Diagnostics indication LED RUN/STOP LED Yes ERROR LED Yes MAINT LED Yes Integrated Functions Counter Number of counters 6 Counting frequency, max. 100 kHz Frequency measurement Yes controlled positioning Yes Number of position-controlled positioning axes, max. 8 Number of positioning axes via pulse-direction interface 4; With integrated outputs PID controller Yes Number of alarm inputs 4 Number of pulse outputs 4 Limit frequency (pulse) 100 kHz Potential separation Potential separation digital inputs Potential separation digital inputs No between the channels, in groups of 1 Potential separation digital outputs Potential separation digital outputs Yes between the channels No between the channels, in groups of 1 EMC Interference immunity against discharge of static electricity Interference immunity against discharge of static Yes electricity acc. to IEC 61000-4-2 -- Test voltage at air discharge 8 kV -- Test voltage at contact discharge 6 kV Interference immunity to cable-borne interference Interference immunity on supply lines acc. to IEC 61000- Yes 4-4 Interference immunity on signal cables acc. to IEC 61000- Yes 4-4 Interference immunity against voltage surge Interference immunity on supply lines acc. to IEC 61000- Yes 4-5 Interference immunity against conducted variable disturbance induced by high-frequency fields Interference immunity against high-frequency radiation Yes acc. to IEC 61000-4-6 Emission of radio interference acc. to EN 55 011 Limit class A, for use in industrial areas Yes; Group 1 6ES72141AG400XB0 Page 5/7 6/29/2023 Subject to change without notice © Copyright Siemens Limit class B, for use in residential areas Degree and class of protection IP degree of protection Standards, approvals, certificates CE mark UL approval cULus FM approval RCM (formerly C-TICK) KC approval Marine approval Ambient conditions Free fall Fall height, max. Ambient temperature during operation min. max. horizontal installation, min. horizontal installation, max. vertical installation, min. vertical installation, max. Ambient temperature during storage/transportation min. max. Air pressure acc. to IEC 60068-2-13 Operation, min. Operation, max. Storage/transport, min. Storage/transport, max. Altitude during operation relating to sea level Installation altitude, min. Installation altitude, max. Relative humidity Operation, max. Vibrations Vibration resistance during operation acc. to IEC 600682-6 Operation, tested according to IEC 60068-2-6 Shock testing tested according to IEC 60068-2-27 Pollutant concentrations SO2 at RH < 60% without condensation configuration / header configuration / programming / header Programming language -- LAD -- FBD -- SCL Know-how protection User program protection/password protection Copy protection Block protection Access protection protection of confidential configuration data Protection level: Write protection Protection level: Read/write protection Protection level: Complete protection programming / cycle time monitoring / header Yes; When appropriate measures are used to ensure compliance with the limits for Class B according to EN 55011 IP20 Yes Yes Yes Yes Yes Yes Yes 0.3 m; five times, in product package -20 °C 60 °C; Number of simultaneously activated inputs or outputs 7 or 5 (no adjacent points) at 60 °C horizontal or 50 °C vertical, 14 or 10 at 55 °C horizontal or 45 °C vertical -20 °C 60 °C -20 °C 50 °C -40 °C 70 °C 795 hPa 1 080 hPa 660 hPa 1 080 hPa -1 000 m 5 000 m; Restrictions for installation altitudes > 2 000 m, see manual 95 %; no condensation 2 g (m/s²) wall mounting, 1 g (m/s²) DIN rail Yes Yes; IEC 68, Part 2-27 half-sine: strength of the shock 15 g (peak value), duration 11 ms S02: < 0.5 ppm; H2S: < 0.1 ppm; RH < 60% condensation-free Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes 6ES72141AG400XB0 Page 6/7 6/29/2023 Subject to change without notice © Copyright Siemens adjustable Dimensions Width Height Depth Weights Weight, approx. last modified: Yes 110 mm 100 mm 75 mm 415 g 7/19/2022 6ES72141AG400XB0 Page 7/7 6/29/2023 Subject to change without notice © Copyright Siemens