Berker SCHUKO Socket Outlet with LED Orientation Light

Assembly of the Device (Figure 1)

• Put the insert (7) into the flush-mounted box correctly positioned and fasten with screws or claws.
• Attach frame (4) of the appropriate switch range and the centre plate (1).
• Carefully guide the centre plate (1) with the plug contacts (3) into the contact sockets (6) without bending the plug contacts.
• The notches (5) in the insert support the mounting device of the centre plate via the centring pins (2).
• Screw the centre plate together with frame.

Functional Test

• The light sensor (8) must be covered over a large area to switch on the LED orientation light.
• Proper functional testing is only possible with sufficient ambient darkness.

Device Assembly (Figure 1)

• Insert the unit (7) correctly into the flush-mounted box and secure with screws or claws.
• Attach the frame (4) of the appropriate switch range and the central piece (1).
• Carefully guide the central piece (1) with the plug contacts (3) into the socket contacts (6) without bending the plug contacts.
• The cutouts (5) in the unit support the mounting of the central piece via the centering pins (2).
• Screw the central piece to the frame.

Function Test

• The light sensor (8) must be largely covered to switch on the LED orientation light.
• Proper functional testing is only possible with sufficient ambient darkness.

Product Information

Best.-Nr.: 4109 xx xx

Order no.: 4109 xx xx

Manufacturer Information

Berker GmbH & Co. KG
Zum Gunterstal
66440 Blieskastel/Germany
Tel.: +49 6842 945 0
Fax: +49 6842 945 4625
E-Mail: info@berker.de
www.berker.com