Berker W.1 Intermediate Switch
Model: 30773505
Description: Grey/Light Grey Matt, Surface-Mounted
Image: A compact, square-shaped Berker W.1 intermediate switch in grey and light grey with a matte finish.
Technical Features
Architecture
Type of control unit: single rocker
Configuration
Type: intermediate
Main Electrical Features
Nominal voltage: 250 V
Rated voltage: 250 V AC
Switching current: 10 AX
Materials
RAL colour: RAL 7011 - Iron grey
Colour of design line: grey/light grey
Colour: dark grey
Material: thermoplastic
Surface appearance: matt
Dimensions
Depth: 61.5 mm
Height: 76 mm
Width: 76 mm
Installation and Mounting
Type: for screw fastening
Connection
Type of connection
- with two clip-in places for Wago 2-wire connection terminals in the housing floor
- with Wago clip-in 2-wire connection terminal for wiring
- with plug-in terminals
Connection system: Quickconnect
Cable
with one entry for 2 cables and one entry for cable and tube
Equipment
with full-face sealing on the rear side of housing for cable entry and surface adjustment on the backside
Safety
Protection index IP: IP55 rated
Use Conditions
Operating temperature: -40 ... 30 °C
Storage/transport temperature: -50 ... 50 °C
Identification
Application, usage: Surface-mounted wet-room installation
Main design line: Berker W.1
Instructions
Pins of quick-release lock made of ZAMAK
