Repair Parts List for RIDGID 10" Compound Miter Saw (Model No. MS10600)
RIDGID parts are available online at www.ridgidparts.com.
Always order by Part Number - Not by Key Number.
Figure 1: Exploded View - Main Assembly
This diagram illustrates the main components of the RIDGID 10" Compound Miter Saw. Key parts include the blade guard assembly, motor assembly, table, fence assembly, arm extension, base, and various fasteners.
| Key No. | Part No. | Description |
|---|
| 1 | See Fig. 3 | Blade Guard Assembly |
| 2 | See Fig. 2 | Motor Assembly |
| 3 | 828647 | Table |
| 4 | 828343 | Plate Throat |
| 5 | 808275-4 | Screw Pan Cr 8-32 x 3/8 |
| 6 | 826055-1 | Knob Miter |
| 7 | 828648 | Fence Asm |
| 8 | 817791 | Arm Extension |
| 9 | 828501 | Base |
| 10 | 827588 | Shim Table |
| 11 | 826163 | Cap Grip |
| 12 | 823297-1 | Spring Index |
| 13 | 805553-24 | Washer 11/32 x 7/8 x 1/16 |
| 14 | 9421621 | Scr Soc Cap 5/16-18 x 5/8 |
| 15 | 823612 | Clamp Extension |
| 16 | 702204-1 | * Screw Thumb 1/4-20 x 1/2 |
| 17 | 817793 | Stop Block |
| 18 | 805553-6 | Washer 21/64 x 5/8 x 1/16 |
| 19 | 813056-2 | Screw Pan Hd. 5/16-18 x 1-1/4 |
| 20 | 826057 | Pointer |
| 21 | 809169-3 | * Screw Pan Hd. Type "T" 8-32 x 3/8 |
| 22 | 9416630 | * Screw Hex Type "T" 5/16-18 x 1 |
| 23 | 823326 | Stop Bevel |
| 24 | 826068 | Indicator Bevel |
| 25 | 828253 | Knob Bevel |
| 26 | 9416187 | Screw Hex Type “T” 5/16-18 x 3/4 |
| 27 | 805553-4 | Washer 21/64 x 9/16 x 1/16 |
| 28 | 821421-6 | O-Ring |
| 29 | See Fig. 3 | Pivot Asm. |
| 30 | 823314 | Wrench Combination |
| 31 | SP6402 | Owners Manual - English/Spanish |
| 32 | SP6402F | Owners Manual - French |
* Standard hardware item - may be purchased locally.
▲ WARNING: These items are important to the safety of this tool. Do not substitute common parts.
Figure 2: Exploded View - Motor Assembly
This diagram details the components of the motor assembly for the RIDGID 10" Compound Miter Saw. It shows the handle, motor housing, brushes, and various internal parts.
| Key No. | Part No. | Description |
|---|
| 1 | 828736 | Screw Pan Cr Pt K60 x 75mm |
| 2 | 828720 | Handle Carry |
| 3 | 808380-5 | * Screw Pan Cr #8 Plastite |
| 4 | 828718 | Handle Upper |
| 5 | 828717 | Actuator Switch |
| 6 | 826053 | Spring Compression |
| 7 | 828719 | Handle Lower |
| 8 | 826064 | Cap Motor Housing |
| 9 | 354653 | Bumper |
| 10 | 826017 | Holder Brush |
| 11 | 826016 | Brush |
| 12 | 826453 | Screw Pn Hd 10-32 x 2-1/4 |
| 13 | 805549-22 | * Washer 13/64 x 3/8 x 1/32 |
| 14 | 826163 | Cap Grip |
| 15 | 826062 | Lock Arbor |
| 16 | 823322 | Spring Arbor Lock |
| 17 | 823417 | Seal |
| 18 | 829512 | Motor Asm |
| 19 | 828716 | Button Lock |
| 20 | 826066 | Switch SPDT |
| 21 | 828735 | Cord w/Plug |
| 22 | 803709-1 | Connector Wire |
* Standard hardware - may be purchased locally.
▲ WARNING: These items are important to the safety of this tool. Do not substitute common parts.
▲ WARNING: Any attempt to repair or replace electrical parts on this unit may create a hazard unless repair is done by a qualified service technician. Repair service is available from authorized RIDGID Service Center.
Figure 3: Exploded View - Blade Guard Assembly
This diagram illustrates the components of the blade guard assembly for the RIDGID 10" Compound Miter Saw, including the dust elbow, arm/guard assembly, washers, arbor assembly, and the saw blade itself.
| Key No. | Part No. | Description |
|---|
| 1 | 37429 | Dust Elbow |
| 2 | 826487-1 | Arm/Guard Asm |
| 3 | 823300-1 | Washer Cup |
| 4 | 823316-1 | Arbor Asm |
| 5 | 821421-3 | Ring "O" |
| 6 | 9416390 | * Screw Pan Cr Ty “T” 10-32 x 5/8 |
| 7 | 9416712 | Washer 3/16 x 5/8 x 1/16 Bl. Ox. |
| 8 | 826481 | Screw Lock Set 1/4-20 x 3/8 |
| 9 | 829503 | Bumper |
| 10 | 823303 | Collar Blade |
| 11 | 827413 | Blade Saw Carbide |
| 12 | 823304 | Screw Blade |
| 13 | 826039 | † Guard Lower |
| 14 | 826765 | Retainer Bearing |
| 15 | 820219-1 | Screw Pan Cr Ty “TT” 1/4-20 x 3/8 |
| 16 | 826026 | Link Actuator |
| 17 | 821521-1 | Screw Shoulder |
| 18 | 823840-3 | Retainer Guard Asm |
| 19 | 823292 | ‡ Spring Guard |
| 20 | 821521 | Screw Shoulder |
| 21 | 823306-1 | Bearing Cam |
| 22 | 828364 | Bag Dust |
* Standard hardware - may be purchased locally.
▲ WARNING: These items are important to the safety of this tool. Do not substitute common parts.
‡ CAUTION: See mechanical assembly caution below.
▲ WARNING: Uncontrolled spring release or misinstallation of these parts may create a hazard unless repair is done by a qualified service technician. Repair service is available from authorized RIDGID Service Center.
CAUTION: Mechanical Assembly, to qualified service technician.
- Wear approved eye protection when working with coil spring including spring, arbor lock 823322.
- Incorrect reassembly of torsion spring 823328 can cause an unsafe condition because cutting head fails to rise fully to stop, or because spring fails through over-stress.
- Improper reassembly of mechanisms controlling movement of lower guard 826039 can cause an unsafe condition because guard fails to operate freely as cutting head is moved up and down.
Figure 4: Exploded View - Pivot Assembly
This diagram shows the components of the pivot assembly for the RIDGID 10" Compound Miter Saw, including screws, pivot, O-rings, shaft stop, knob, ring retaining, washers, and springs.
| Key No. | Part No. | Description |
|---|
| 1 | 803309-2 | Screw Set Hex Soc. Locking 10-32 x 3/8 |
| 2 | 828504 | Pivot |
| 3 | 821421-2 | O-Ring |
| 4 | 826058 | Shaft Stop |
| 5 | 826357 | Knob |
| 6 | 805606 | Ring Retaining |
| 7 | 803899-5 | Washer Thrust |
| 8 | 823328 | Spring Torsion |
| 9 | 823298-1 | Spacer Spring |
| 10 | 823301 | Shaft Pivot |
* Standard hardware - may be purchased locally.
▲ WARNING: These items are important to the safety of this tool. Do not substitute common parts.
‡ CAUTION: See mechanical assembly caution on page 33.
▲ WARNING: Uncontrolled spring release or misinstallation of these parts may create a hazard unless repair is done by a qualified service technician. Repair service is available from authorized RIDGID Service Center.
