RIDGID MS1060 10 Inch Compound Miter Saw Owner's Manual

This document serves as the owner's manual for the RIDGID MS1060 10 Inch Compound Miter Saw. It provides essential information for safe operation, warranty details, technical assistance, and repair parts.

For any questions regarding operation, warranty, technical assistance, or repair parts, users are advised to contact RIDGID directly. It is recommended to have the model number (MS1060) and serial number available when calling.

RIDGID power tool parts and accessories are available online at www.ridgidparts.com.

Repair Parts Information

This manual includes detailed parts lists and corresponding diagrams for the RIDGID MS1060 10 Inch Compound Miter Saw. These resources are crucial for identifying and ordering replacement components.

Key sections for repair parts include:

• Figure 1: Main Assembly Parts List - Provides a comprehensive list of parts for the overall saw assembly, with corresponding key numbers to a diagram (not included in this HTML summary due to complexity).
• Figure 2: Motor Assembly Parts List - Details components specific to the motor assembly.
• Figure 3: Blade Guard Assembly Parts List - Outlines parts for the blade guard mechanism.
• Figure 4: Pivot Assembly Parts List - Lists components related to the saw's pivot mechanism.

All parts should be ordered by their specific part number, not by key number. Standard hardware items may be purchased locally.

Wiring Diagram & Troubleshooting

A wiring diagram for the RIDGID 10 Inch Miter Saw (Model MS10600) is provided, illustrating the connections for the field winding, brake winding, armature, brushes, and SPDT switch.

Troubleshooting steps for the brake, to be performed by a qualified service person only, include:

• Checking commutation for heavy sparking.
• Unplugging the power cord before further troubleshooting.
• Installing new brushes if delayed brake come-in is observed.
• Checking brake circuit for continuity using an ohmmeter.
• Verifying blade rotation direction after repairs.

Important Safety Warnings & Cautions for Repairs

WARNING: Items identified as critical for safety in the parts lists must not be substituted with common parts. This tool is specially insulated; to reduce the risk of electrical shock, fire, or injury, only identical parts from the parts list should be used. Reassemble exactly as originally assembled.

WARNING: Any attempt to repair or replace electrical parts on this unit may create a hazard unless repair is done by a qualified service technician. Repair service is available from authorized RIDGID Service Centers.

CAUTION: Mechanical Assembly (to be performed by a qualified service technician):

1. Wear approved eye protection when working with coil springs (including spring, arbor lock 823322).
2. Incorrect reassembly of torsion spring 823328 can cause unsafe conditions, such as the cutting head failing to rise fully or the spring failing due to over-stress.
3. Improper reassembly of mechanisms controlling the lower guard (826039) can cause unsafe conditions, such as the guard failing to operate freely.

WARNING: Uncontrolled spring release or misinstallation of certain parts may create a hazard unless repair is done by a qualified service technician. Repair service is available from authorized RIDGID Service Center.