Thermos Mug/Tumbler/Hydration Bottle Care and Use Guide

360 Degree Lid (If Present)

Diagram illustrating the components of the 360 Degree Lid: Part A represents the lid itself, with A1 indicating a tab located on the back of the lid. Part B represents the container.

1. Remove lid (A) by pushing upwards on tab (A1) found in the back of the lid (A).
2. Wash lid (A) separately.
3. Fill container (B) with contents. Do not overfill: Leave space for lid (A) to avoid overflow.
4. Replace the lid (A) by pushing the lid onto the container. Ensure that the lid (A) is securely placed on the container (B) before using. See WARNINGS Section below for further details.

Slide Lock Lid (If Present)

Diagram illustrating the components of the Slide Lock Lid: E is the lid, with E2 being a tab on its back. C is the slider, featuring tabs C2 on its underside that fit into grooves on the lid. C1 is a tab on the top of the slider. D is the container, and D1 indicates a straw (sold separately). E1 is the drink opening on the lid.

1. Remove lid (E) by pushing upwards on tab (E2) found in the back of the lid (E).
2. Remove slider (C) by squeezing and pushing the tabs (C2) through grooves on the underside of lid (E).
3. Wash all parts separately, and then re-assemble by snapping the slider (C) into place. Note: slider (C) should be oriented so the tab (C1) on top is near the back.
4. Fill container (D) with contents. Do not overfill: Leave space for the lid (E), to avoid overflow.
5. Replace the lid (E) by pushing the lid (E) onto the container (D). Double check that the lid (E) is securely placed on the container before using.
6. To drink, push the slider (C) so the drink opening (E1) is exposed.
7. The drink opening (E1) is designed to accommodate a drinking straw (D1) – straw must be purchased separately. ? DO NOT use a drinking straw with hot liquids. A drinking straw IS FOR COLD LIQUIDS ONLY. Hot liquids may burn or scald user.
8. When finished, push the slider (C) in the opposite direction to cover the drink opening (E1). See WARNINGS Section below for further details.

Hydration Lid (If Present)

⚠️ WARNING - THE HYDRATION LID IS NOT FOR USE WITH HOT LIQUIDS: For cold liquids only. Hot liquids may burn or scald user.

Diagram illustrating the components of the Hydration Lid: H is the lid, with H1 being an o-ring gasket on its underside. F is the lid cover, with F2 being a tab to open it. F1 is a spout gasket located on the underside of the lid cover. G is the container. H2 is the drink opening on the lid.

1. Remove lid (H) by twisting counterclockwise.
2. Open the lid cover (F) by pushing up on the tab (F2) until the lid (F) is locked in the open position.
3. Pull out spout gasket (F1) to remove from underside of lid cover (F).
4. Remove o-ring gasket (H1) from underside of lid (H).
5. Wash all parts separately and re-assemble. Ensure gaskets (H1 and F1) are properly seated to minimize leaking.
6. Fill container (G) with contents. Do not overfill: Leave space for lid (H) to avoid overflow.
7. Replace the lid (H) by twisting it clockwise.
8. To drink, flip up the lid cover (F) until locked in the open position as shown in diagram.
9. When finished drinking, flip the lid cover (F) in the opposite direction to cover the drink opening (H2). Press lid cover (F) until tightly closed. See WARNINGS Section below for further details.

Warnings - Tumbler and Mug

• ? DO NOT microwave the lid – remove lid before microwaving.
• Use extreme caution when handling the plastic container with hot contents or after reheating in the microwave.
• The body of the plastic container will be hot after microwaving.
• ? DO NOT microwave container for more than 30 seconds at a time.
• ? DO NOT microwave container that is empty.
• Follow your microwave manufacturer's recommendation when heating liquids.
• Excessive reheating or heating time in the microwave may damage the container.
• ? DO NOT use plastic wrap inside or on top of the container during microwave use. The plastic wrap could heat, melt and adhere to the container walls.
• To avoid pitting, do not reheat liquids high in salt, oil, fat, sugar or tomato.
• Heating liquids containing curry seasoned with the herb turmeric may stain the container.
• Reheating and/or melting liquids with high sugar content (i.e. chocolate, candies, jelly) could lead to severe damage and possibly melt the container.
• ? DO NOT use product on stove-top or in any type of oven.
• STRAWS ARE NOT FOR USE WITH HOT LIQUIDS: For cold liquids only. Hot liquids may burn or scald user.
• Always test temperature of contents before consuming.
• ? DO NOT overfill the container: Leave space at top of container for lid, straw (if present), and stopper (if present), to avoid overflow.
• In general, contents should not be left in container for longer than 24 hours. However, the rate at which contents spoil depends on several factors. Certain contents that include, for example, dairy and/or tomato may start to spoil sooner. Proceed with caution when using the product with quick spoiling contents.
• If contents are left in container longer than 24 hours, or you suspect spoilage, use caution when opening container. Contents spoilage can cause pressure inside container to build, possibly leading to forceful ejection of stopper or contents. In such circumstances, before attempting to open container, ENSURE THE OPENING IS POINTED AWAY FROM THE USER OR OTHER PERSONS TO AVOID INJURY.
• ? DO NOT use tools or devices to force container to open.
• If you are unable to open container by hand, do not open it and dispose of it at your local waste facility.
• ? DO NOT use to store or carry carbonated drinks or dry ice. This may cause lid/stopper and contents to eject forcefully or leak.

Warnings - Hydration Bottle

• ? DO NOT use product in microwave, on stove top, or in any type of oven.
• NOT FOR USE WITH HOT LIQUIDS: For cold liquids only. Hot liquids may burn or scald user.
• Always test temperature of contents before consuming.
• ? DO NOT overfill the container: Leave space at top of container for lid, straw (if present), and stopper (if present), to avoid overflow.
• Check periodically to make sure any gasket (flexible band around lid and/or stopper) is present and properly positioned to prevent contents from passing through lid when lid is closed (if applicable to product). Missing, worn or misaligned gasket may cause product to leak.
• In general, contents should not be left in container for longer than 24 hours. However, the rate at which contents spoil depends on several factors. Certain contents that include, for example, dairy and/or tomato may start to spoil sooner. Proceed with caution when using the product with quick spoiling contents.
• If contents are left in container longer than 24 hours, or you suspect spoilage, use caution when opening container. Contents spoilage can cause pressure inside container to build, possibly leading to forceful ejection of stopper or contents. In such circumstances, before attempting to open container, ENSURE THE OPENING IS POINTED AWAY FROM THE USER OR OTHER PERSONS TO AVOID INJURY.
• ? DO NOT use tools or devices to force container to open.
• If you are unable to open container by hand, do not open it and dispose of it at your local waste facility.
• ? DO NOT use to store or carry carbonated drinks or dry ice. This may cause lid/stopper and contents to eject forcefully or leak.