Features
The Medium Profile Unit Coolers are presented as the ideal evaporator solution for medium to large walk-in coolers and freezers. They are designed with a focus on efficiency, performance, and serviceability, distinguishing them from competitors. Engineered to meet the Department of Energy's new AWEF* performance regulations, these units feature energy-efficient rail-mount Dual Speed EC Motors. For optimal performance, units are circuited for multiple refrigerants and incorporate optimized circuit patterns, enhanced surface coil tubing, and new high-efficiency fan and venturi designs. The product line includes several features for improved serviceability, such as rail-mount motors, easily removable fan guards, modular fan panels, face mount defrost heaters, hinged drain pans, and shipping pallets designed for quicker installation.
Sizes
A wide array of sizes is available, with capacities ranging from 11,000 to 99,000 BTUH at a 10°F TD. Models offer airflow capacities spanning from 2,090 to 12,770 CFM.
Housing
Each unit is constructed with a rust-free, heavy gauge, textured aluminum housing, providing a lightweight yet extremely durable structure. Models feature hinged one-piece drain pans for convenient servicing and maintenance. Hanger holes are provided on all units to facilitate fast installation.
Coil
The coils feature seamless copper tubes that are staggered and mechanically expanded into corrugated aluminum fins to maximize heat transfer. Die-formed fin collars ensure accurate fin spacing. The top panel is fastened directly to the tube sheets of the coil, providing high structural strength. Low Temperature Electric Defrost models are available in both 6 FPI and 4 FPI configurations. Medium Temperature Electric Defrost and Air Defrost models are available in 6 FPI.
Motors
All models are equipped with highly efficient Dual Speed Electronically Commutated (EC) motors that comply with California Title 24 regulations.
Fans & Fan Guards
Powerful, heavy-duty aluminum fans are individually balanced to ensure vibration-free operation. Standard heavy-gauge wire fan guards are UL/cUL-approved and epoxy coated for corrosion resistance. The air throw for Medium Profile Unit Coolers is 75 ft.
Refrigerants
The Medium Profile Unit Coolers are optimized for multiple refrigerants, including R454A, R454C, and R455A. Users should specify system refrigerant requirements when ordering. A separate compartment is provided for all refrigerant connections, allowing ample room for internal mounting of Expansion Valves.
Electrical
Units are available in 115/12 (Air Defrost only), 208-230V/12, 208-230V/32, 460V/1, or 460V/32 configurations. A large compartment is supplied for all electrical components and is easily accessible by removing the end panel. All models are UL and cUL listed.
Optional Features
- EcoNet® Enabled Controller³ (factory-installed)
- EcoNet® Command Center (loose)
- Thermostat - Mechanical or Electric (mounted or loose)
- Thermostatic Expansion Valve (mounted or loose)
- Adjustable Defrost Termination
- Electronic Expansion Valve (mounted or loose)
- Solenoid Shut Off Valve (loose)
- Check Shut Off Valve (loose)
- Insulated Drain Pan
- Painted Cabinet (White or Black)
- Stainless Steel Cabinet
- Coated Coil (Bronz-Glow, or Electrofin®)
- Suction/Liquid Heat Exchanger (loose)
EcoNet® Enabled Unit Coolers (Optional)
Developed in conjunction with Rheem Manufacturing specifically for walk-in coolers and freezers, this technology builds on the reliability and efficiency of Rheem's EcoNet® system. It offers benefits such as energy savings through precise superheat and space temperature control, fan cycling, and optimized defrost scheduling based on compressor runtime. It also eliminates unnecessary defrosts, maximizes energy efficiency with reduced compressor runtime, and lowers fan speed by 50% during the off cycle for energy savings. These units can be used with a condensing unit in single and multiple evaporator installations.
The optional EcoNet® Command Center provides an intuitive graphical interface that controls up to 32 devices. It facilitates continuous communication between system components and offers a remote mount display, allowing for programming, monitoring, and troubleshooting of EcoNet® Enabled Unit Coolers from outside the cooled space.
Model Nomenclature
The model nomenclature is structured as follows:
| Category | Identifier | Description |
|---|---|---|
| Brand | C | Coldzone |
| Refrigerant Class | A | A2L |
| Style | M | Medium Profile |
| Fins per Inch (FPI) | 4 or 6 | 4 FPI or 6 FPI |
| Defrost Type | A, D, or E | A = Air Defrost, D = Medium Temp Electric Defrost, E = Low Temp Electric Defrost |
| BTUH in Thousands | XXX | Capacity in thousands of BTUH |
| Unit Voltage | A, D, E, F, G | A = 115/1/60, D = 208-230/1/60, E = 208-230/3/60, F = 460/1/60, G = 460/3/60 |
| Motor Type | D | Dual Speed EC |
| Vintage | A | A |
Note: 50 Hz is available; contact Factory for Additional Information. EcoNet® approved refrigerants include R454A, R454C, R455A.
Application Rating & Electrical Data - Air Defrost
| Model No. | BTUH Capacity @ +25°F S.T. & 10°F TD (R454A/R454C/R455A) | CFM | No. of Fans | Total Fan Motor AMPS | MCA | MOPD | ||
|---|---|---|---|---|---|---|---|---|
| 115V/1 | 208-230V/1 | 460V/1 | ||||||
| CAM6A219*DA | 21,900 | 3,190 | 1 | 3.2 | 1.9 | 1.2 | 15.0 | 20 |
| CAM6A268*DA | 26,800 | 2,950 | 1 | 3.2 | 1.9 | 1.2 | 15.0 | 20 |
| CAM6A336*DA | 33,600 | 6,950 | 2 | 6.4 | 3.8 | 2.4 | 15.0 | 20 |
| CAM6A448*DA | 44,800 | 6,380 | 2 | 6.4 | 3.8 | 2.4 | 15.0 | 20 |
| CAM6A540*DA | 54,000 | 5,900 | 2 | 6.4 | 3.8 | 2.4 | 15.0 | 20 |
| CAM6A668*DA | 66,800 | 9,580 | 3 | 9.6 | 5.7 | 3.6 | 15.0 | 20 |
| CAM6A800*DA | 80,000 | 8,860 | 3 | 9.6 | 5.7 | 3.6 | 15.0 | 20 |
| CAM6A888*DA | 88,800 | 12,770 | 4 | 12.8 | 7.6 | 4.8 | 15.0 | 20 |
| CAM6A990*DA | 99,000 | 11,800 | 4 | 12.8 | 7.6 | 4.8 | 15.0 | 20 |
Note: Asterisk represents a variable character based on voltage ordered.
Application Rating & Electrical Data - Medium Temperature Electric Defrost
6 FPI Models
| Model No. | BTUH Capacity @ +25°F S.T. & 10°F TD (R454A/R454C/R454A) | CFM | No. of Fans | Total Fan Motor AMPS Dual Speed EC | MCA | MOPD | Heater Amps (208-230V/1) | Heater Watts | |
|---|---|---|---|---|---|---|---|---|---|
| 208-230V/1 | 460V/1 | ||||||||
| CAM6D218*DA | 21,900 | 3,190 | 1 | 1.9 | 1.2 | 15.0 | 20 | 19.5 | 4,480 |
| CAM6D267*DA | 26,800 | 2,950 | 1 | 1.9 | 1.2 | 15.0 | 20 | 19.5 | 4,480 |
| CAM6D335*DA | 33,600 | 6,950 | 2 | 3.8 | 2.4 | 15.0 | 20 | 38.5 | 8,860 |
| CAM6D447*DA | 44,800 | 6,380 | 2 | 3.8 | 2.4 | 15.0 | 20 | 38.5 | 8,860 |
| CAM6D539*DA | 54,000 | 5,900 | 2 | 3.8 | 2.4 | 15.0 | 20 | 38.5 | 8,860 |
| CAM6D667*DA | 66,800 | 9,580 | 3 | 5.7 | 3.6 | 15.0 | 20 | 38.5 | 8,860 |
| CAM6D799*DA | 80,000 | 8,860 | 3 | 5.7 | 3.6 | 15.0 | 20 | 38.5 | 8,860 |
| CAM6D887*DA | 88,700 | 12,770 | 4 | 7.6 | 4.8 | 15.0 | 20 | 38.5 | 17,850 |
| CAM6D989*DA | 98,900 | 11,800 | 4 | 7.6 | 4.8 | 15.0 | 20 | 44.9 | 17,850 |
Note: Asterisk represents a variable character based on voltage ordered. 208-230 ratings include 2 amp for controls on EcoNet® Enabled units.
| Model No. | Base Model | EcoNet® Enabled | Heater Amps (208-230V/3) | Heater Watts | ||
|---|---|---|---|---|---|---|
| MCA | MOPD | MCA | MOPD | |||
| CAM6D218EDA | 15.0 | 20 | 16.1 | 20 | 11.3 | 4,480 |
| CAM6D267EDA | 15.0 | 20 | 16.1 | 20 | 11.3 | 4,480 |
| CAM6D335EDA | 15.0 | 20 | 29.8 | 30 | 22.2 | 8,860 |
| CAM6D447EDA | 15.0 | 20 | 29.8 | 30 | 22.2 | 8,860 |
| CAM6D539EDA | 15.0 | 20 | 29.8 | 30 | 22.2 | 8,860 |
| CAM6D667EDA | 15.0 | 20 | 43.9 | 45 | 33.5 | 13,340 |
| CAM6D799EDA | 15.0 | 20 | 43.9 | 45 | 33.5 | 13,340 |
| CAM6D887EDA | 15.0 | 20 | 58.1 | 60 | 44.9 | 17,920 |
| CAM6D989EDA | 15.0 | 20 | 58.1 | 60 | 44.9 | 17,850 |
Note: 208-230 ratings include 2 amp for controls on EcoNet® Enabled units.
| Model No. | Base Model | EcoNet® Enabled | Heater Amps (460V/1) | Heater Watts | ||
|---|---|---|---|---|---|---|
| MCA | MOPD | MCA | MOPD | |||
| CAM6D218FDA | 15.0 | 20 | 15.0 | 20 | 9.7 | 4,480 |
| CAM6D267FDA | 15.0 | 20 | 15.0 | 20 | 9.7 | 4,480 |
| CAM6D335FDA | 15.0 | 20 | 25.1 | 30 | 19.3 | 8,860 |
| CAM6D447FDA | 15.0 | 20 | 25.1 | 30 | 19.3 | 8,860 |
| CAM6D539FDA | 15.0 | 20 | 25.1 | 30 | 19.3 | 8,860 |
| CAM6D667FDA | 15.0 | 20 | 37.3 | 40 | 29.0 | 13,340 |
| CAM6D799FDA | 15.0 | 20 | 37.3 | 40 | 29.0 | 13,340 |
| CAM6D887FDA | 15.0 | 20 | 49.5 | 50 | 38.8 | 17,850 |
| CAM6D989FDA | 15.0 | 20 | 49.5 | 50 | 38.8 | 17,850 |
Note: 460 ratings include 1 amp for controls on EcoNet® Enabled units.
| Model No. | Base Model | EcoNet® Enabled | Heater Amps (460V/3) | Heater Watts | ||
|---|---|---|---|---|---|---|
| MCA | MOPD | MCA | MOPD | |||
| CAM6D218GDA | 15.0 | 20 | 15.0 | 20 | 5.6 | 4,480 |
| CAM6D267GDA | 15.0 | 20 | 15.0 | 20 | 5.6 | 4,480 |
| CAM6D335GDA | 15.0 | 20 | 15.0 | 20 | 11.1 | 8,860 |
| CAM6D447GDA | 15.0 | 20 | 15.0 | 20 | 11.1 | 8,860 |
| CAM6D539GDA | 15.0 | 20 | 15.0 | 20 | 11.1 | 8,860 |
| CAM6D667GDA | 15.0 | 20 | 22.0 | 25 | 16.8 | 13,340 |
| CAM6D799GDA | 15.0 | 20 | 22.0 | 25 | 16.8 | 13,340 |
| CAM6D887GDA | 15.0 | 20 | 29.0 | 30 | 22.4 | 17,850 |
| CAM6D989GDA | 15.0 | 20 | 29.0 | 30 | 22.4 | 17,850 |
Note: 460 ratings include 1 amp for controls on EcoNet® Enabled units.
Application Rating & Electrical Data - Low Temperature Electric Defrost
6 FPI Models
| Model No. | BTUH Capacity @ -20°F S.T. & 10°F TD (R454A/R454C/R454A) | CFM | No. of Fans | Total Fan Motor AMPS Dual Speed EC | MCA | MOPD | |
|---|---|---|---|---|---|---|---|
| 208-230V/1 | 460V/1 | ||||||
| CAM6E181*DA | 18,100 | 3,190 | 1 | 1.9 | 1.2 | 15.0 | 20 |
| CAM6E217*DA | 21,900 | 2,950 | 1 | 1.9 | 1.2 | 15.0 | 20 |
| CAM6E371*DA | 37,100 | 6,380 | 2 | 3.8 | 2.4 | 15.0 | 20 |
| CAM6E446*DA | 44,600 | 5,900 | 2 | 3.8 | 2.4 | 15.0 | 20 |
| CAM6E557*DA | 55,700 | 9,570 | 3 | 5.7 | 3.6 | 15.0 | 20 |
| CAM6E669*DA | 66,900 | 8,850 | 3 | 5.7 | 3.6 | 15.0 | 20 |
| CAM6E741*DA | 74,100 | 12,760 | 4 | 7.6 | 4.8 | 15.0 | 20 |
| CAM6E890*DA | 89,000 | 11,800 | 4 | 7.6 | 4.8 | 15.0 | 20 |
4 FPI Models
| Model No. | CFM | No. of Fans | Total Fan Motor AMPS Dual Speed EC | MCA | MOPD | |
|---|---|---|---|---|---|---|
| 208-230V/1 | 460V/1 | |||||
| CAM4E129*DA | 3,580 | 1 | 1.9 | 1.2 | 15.0 | 20 |
| CAM4E168*DA | 3,360 | 1 | 1.9 | 1.2 | 15.0 | 20 |
| CAM4E271*DA | 7,170 | 2 | 3.8 | 2.4 | 15.0 | 20 |
| CAM4E340*DA | 6,730 | 2 | 3.8 | 2.4 | 15.0 | 20 |
| CAM4E398*DA | 10,750 | 3 | 5.7 | 3.6 | 15.0 | 20 |
| CAM4E495*DA | 10,100 | 3 | 5.7 | 3.6 | 15.0 | 20 |
| CAM4E529*DA | 14,300 | 4 | 7.6 | 4.8 | 15.0 | 20 |
| CAM4E658*DA | 13,500 | 4 | 7.6 | 4.8 | 15.0 | 20 |
Notes: Asterisk represents a variable character based on voltage ordered. Dual Speed EC Motors are compliant with California Title 24 regulations. EC Motors are Thermally Protected Internally.
Capacity Correction for Electric Defrost Evaporators
| S.S.T. (Dew) | 20°F | 0°F | -10°F | -20°F | -30°F | -40°F |
|---|---|---|---|---|---|---|
| Multiply Capacity by: | 1.15 | 1.075 | 1.0375 | 1 | 0.9625 | 0.925 |
Note: Capacity values adjusted using the Correction Table for Electric Defrost Evaporators.
Application Rating & Electrical Data - Low Temperature Electric Defrost
6 FPI Models
| Model No. | Base Model | EcoNet® Enabled | Heater Amps (208-230V/1) | Heater Watts | ||
|---|---|---|---|---|---|---|
| MCA | MOPD | MCA | MOPD | |||
| CAM6E181DDA | 15.0 | 20 | 26.3 | 30 | 19.5 | 4,480 |
| CAM6E217DDA | 15.0 | 20 | 26.3 | 30 | 19.5 | 4,480 |
| CAM6E371DDA | 15.0 | 20 | 50.2 | 60 | 38.5 | 8,860 |
| CAM6E446DDA | 15.0 | 20 | 50.2 | 60 | 38.5 | 8,860 |
| CAM4E129DDA | 15.0 | 20 | 26.3 | 30 | 19.5 | 4,480 |
| CAM4E168DDA | 15.0 | 20 | 26.3 | 30 | 19.5 | 4,480 |
| CAM4E271DDA | 15.0 | 20 | 50.2 | 60 | 38.5 | 8,860 |
| CAM4E340DDA | 15.0 | 20 | 50.2 | 60 | 38.5 | 8,860 |
Note: 208-230 ratings include 2 amp for controls on EcoNet® Enabled units.
| Model No. | Base Model | EcoNet® Enabled | Heater Amps (208-230V/3) | Heater Watts | ||
|---|---|---|---|---|---|---|
| MCA | MOPD | MCA | MOPD | |||
| CAM6E181EDA | 15.0 | 20 | 16.1 | 20 | 11.3 | 4,480 |
| CAM6E217EDA | 15.0 | 20 | 16.1 | 20 | 11.3 | 4,480 |
| CAM6E371EDA | 15.0 | 20 | 29.8 | 30 | 22.2 | 8,860 |
| CAM6E446EDA | 15.0 | 20 | 29.8 | 30 | 22.2 | 8,860 |
| CAM6E557EDA | 15.0 | 20 | 43.9 | 45 | 33.5 | 13,340 |
| CAM6E669EDA | 15.0 | 20 | 43.9 | 45 | 33.5 | 13,340 |
| CAM6E741EDA | 15.0 | 20 | 58.1 | 60 | 44.9 | 17,850 |
| CAM6E890EDA | 15.0 | 20 | 58.1 | 60 | 44.9 | 17,850 |
| CAM4E129EDA | 15.0 | 20 | 16.1 | 20 | 11.3 | 4,480 |
| CAM4E168EDA | 15.0 | 20 | 16.1 | 20 | 11.3 | 4,480 |
| CAM4E271EDA | 15.0 | 20 | 29.8 | 30 | 22.2 | 8,860 |
| CAM4E340EDA | 15.0 | 20 | 29.8 | 30 | 22.2 | 8,860 |
| CAM4E398EDA | 15.0 | 20 | 43.9 | 45 | 35.5 | 13,340 |
| CAM4E495EDA | 15.0 | 20 | 43.9 | 45 | 35.5 | 13,340 |
| CAM4E529EDA | 15.0 | 20 | 58.1 | 60 | 44.7 | 17,850 |
| CAM4E658EDA | 15.0 | 20 | 58.1 | 60 | 44.7 | 17,850 |
Note: 208-230 ratings include 2 amp for controls on EcoNet® Enabled units.
| Model No. | Base Model | EcoNet® Enabled | Heater Amps (460V/1) | Heater Watts | ||
|---|---|---|---|---|---|---|
| MCA | MOPD | MCA | MOPD | |||
| CAM6E181EFA | 15.0 | 20 | 15.0 | 20 | 9.7 | 4,480 |
| CAM6E217EFA | 15.0 | 20 | 15.0 | 20 | 9.7 | 4,480 |
| CAM6E371EFA | 15.0 | 20 | 25.1 | 30 | 19.3 | 8,860 |
| CAM6E446EFA | 15.0 | 20 | 25.1 | 30 | 19.3 | 8,860 |
| CAM6E557EFA | 15.0 | 20 | 37.3 | 40 | 29.0 | 13,340 |
| CAM6E669EFA | 15.0 | 20 | 37.3 | 40 | 29.0 | 13,340 |
| CAM6E741FDA | 15.0 | 20 | 49.5 | 50 | 38.8 | 17,850 |
| CAM6E890FDA | 15.0 | 20 | 49.5 | 50 | 38.8 | 17,850 |
| CAM4E129FDA | 15.0 | 20 | 15.0 | 20 | 9.7 | 4,480 |
| CAM4E168FDA | 15.0 | 20 | 15.0 | 20 | 9.7 | 4,480 |
| CAM4E271FDA | 15.0 | 20 | 25.1 | 30 | 19.3 | 8,860 |
| CAM4E340FDA | 15.0 | 20 | 25.1 | 30 | 19.3 | 8,860 |
| CAM4E398FDA | 15.0 | 20 | 37.3 | 40 | 29.0 | 13,340 |
| CAM4E495FDA | 15.0 | 20 | 37.3 | 40 | 29.0 | 13,340 |
| CAM4E529FDA | 15.0 | 20 | 49.5 | 50 | 38.8 | 17,850 |
| CAM4E658FDA | 15.0 | 20 | 49.5 | 50 | 38.8 | 17,850 |
Note: 460 ratings include 1 amp for controls on EcoNet® Enabled units.
| Model No. | Base Model | EcoNet® Enabled | Heater Amps (460V/3) | Heater Watts | ||
|---|---|---|---|---|---|---|
| MCA | MOPD | MCA | MOPD | |||
| CAM6E181EGA | 15.0 | 20 | 15.0 | 20 | 5.6 | 4,480 |
| CAM6E217EGA | 15.0 | 20 | 15.0 | 20 | 5.6 | 4,480 |
| CAM6E371EGA | 15.0 | 20 | 15.0 | 20 | 11.1 | 8,860 |
| CAM6E446EGA | 15.0 | 20 | 15.0 | 20 | 11.1 | 8,860 |
| CAM6E557EGA | 15.0 | 20 | 22.0 | 25 | 16.8 | 13,340 |
| CAM6E669EGA | 15.0 | 20 | 22.0 | 25 | 16.8 | 13,340 |
| CAM6E741GDA | 15.0 | 20 | 29.0 | 30 | 22.4 | 17,850 |
| CAM6E890GDA | 15.0 | 20 | 29.0 | 30 | 22.4 | 17,850 |
| CAM4E129GDA | 15.0 | 20 | 15.0 | 20 | 5.6 | 4,480 |
| CAM4E168GDA | 15.0 | 20 | 15.0 | 20 | 5.6 | 4,480 |
| CAM4E271GDA | 15.0 | 20 | 15.0 | 20 | 11.1 | 8,860 |
| CAM4E340GDA | 15.0 | 20 | 15.0 | 20 | 11.1 | 8,860 |
| CAM4E398GDA | 15.0 | 20 | 22.0 | 25 | 16.8 | 13,340 |
| CAM4E495GDA | 15.0 | 20 | 22.0 | 25 | 16.8 | 13,340 |
| CAM4E529GDA | 15.0 | 20 | 29.0 | 30 | 22.4 | 17,850 |
| CAM4E658GDA | 15.0 | 20 | 29.0 | 30 | 22.4 | 17,850 |
Note: 460 ratings include 1 amp for controls on EcoNet® Enabled units.
Distributor Nozzles & Expansion Valves - Air Defrost Models
6 FPI Models
| Model No. | Nozzle @ Liq. Temp. | TXV^ @ Liq. Temp. | EEV @ Liq. Temp. | No. of Circuits | |||
|---|---|---|---|---|---|---|---|
| 50°F | 100°F | 50°F | 100°F | 50°F | 100°F | ||
| CAM6A219*DA | 3/4, TYPE L | 2, TYPE L | SBFTE-A-C | SBFTE-B-C | SER-B | SER-B | 6 |
| CAM6A268*DA | 1, TYPE L | 2-1/2, TYPE L | SBFTE-B-C | SBFTE-B-C | SER-B | SER-B | 6 |
| CAM6A336*DA | 1, TYPE L | 3, TYPE L | SBFTE-B-C | SBFTE-C-C | SER-B | SER-C | 8 |
| CAM6A448*DA | 1-1/2, TYPE L | 4, TYPE L | SBFTE-B-C | SBFTE-C-C | SER-C | SER-C | 9 |
| CAM6A540*DA | 2, TYPE G | 5, TYPE G | SBFTE-C-C | SBFTE-C-C | SER-C | SER-C | 12 |
| CAM6A668*DA | 2-1/2, TYPE G | 6, TYPE G | SBFTE-C-C | ERTE-8-C | SER-C | SER-C | 12 |
| CAM6A800*DA | 3, TYPE G | 10, TYPE G | SBFTE-C-C | ERTE-8-C | SER-C | SER-DS | 16 |
| CAM6A888*DA | 3, TYPE G | 10, TYPE G | ERTE-8-C | ERTE-10-C | SER-C | SER-DS | 18 |
| CAM6A990*DA | 4, TYPE G | 10, TYPE G | ERTE-8-C | ERTE-10-C | SER-C | SER-DS | 24 |
| CAM6A219*DA | 3/4, TYPE L | 2, TYPE L | SBFVE-B-C | SBFVE-B-C | SER-B | SER-B | 6 |
| CAM6A268*DA | 1, TYPE L | 2-1/2, TYPE L | SBFVE-B-C | SBFVE-C-C | SER-B | SER-C | 6 |
| CAM6A336*DA | 1, TYPE L | 3, TYPE L | SBFVE-B-C | SBFVE-C-C | SER-C | SER-C | 8 |
| CAM6A448*DA | 1-1/2, TYPE L | 4, TYPE L | SBFVE-C-C | SBFVE-C-C | SER-C | SER-C | 9 |
| CAM6A540*DA | 2, TYPE G | 5, TYPE G | SBFVE-C-C | OVE-10-C | SER-C | SER-C | 12 |
| CAM6A668*DA | 2-1/2, TYPE G | 6, TYPE G | SBFVE-C-C | OVE-10-C | SER-C | SER-DS | 12 |
| CAM6A800*DA | 3, TYPE G | 10, TYPE G | OVE-10-C | OVE-10-C | SER-C | SER-DS | 16 |
| CAM6A888*DA | 3, TYPE G | 10, TYPE G | OVE-10-C | OVE-10-C | SER-DS | SER-DS | 18 |
| CAM6A990*DA | 4, TYPE G | 10, TYPE G | OVE-10-C | OVE-10-C | SER-DS | SER-DS | 24 |
| CAM6A219*DA | 3/4, TYPE L | 2, TYPE L | SBFVE-B-C | SBFVE-B-C | SER-B | SER-B | 6 |
| CAM6A268*DA | 1, TYPE L | 2-1/2, TYPE L | SBFVE-B-C | SBFVE-C-C | SER-B | SER-C | 6 |
| CAM6A336*DA | 1, TYPE L | 3, TYPE L | SBFVE-B-C | SBFVE-C-C | SER-C | SER-C | 8 |
| CAM6A448*DA | 1-1/2, TYPE L | 4, TYPE L | SBFVE-C-C | SBFVE-C-C | SER-C | SER-C | 9 |
| CAM6A540*DA | 2, TYPE G | 5, TYPE G | SBFVE-C-C | OVE-10-C | SER-C | SER-C | 12 |
| CAM6A668*DA | 2-1/2, TYPE G | 6, TYPE G | SBFVE-C-C | OVE-10-C | SER-C | SER-DS | 12 |
| CAM6A800*DA | 3, TYPE G | 10, TYPE G | OVE-10-C | OVE-10-C | SER-C | SER-DS | 16 |
| CAM6A888*DA | 3, TYPE G | 10, TYPE G | OVE-10-C | OVE-10-C | SER-DS | SER-DS | 18 |
| CAM6A990*DA | 4, TYPE G | 10, TYPE G | OVE-10-C | OVE-10-C | SER-DS | SER-DS | 24 |
Notes: The Distributor lines are 3/16" or 1/4" diameter and 27" long. Asterisk represents a variable character based on voltage ordered. Expansion valve selections are based on +25°F Suction Temp and 8°F to 12°F evaporator TD. Contact factory for operating conditions outside this range. SBFTE and ERTE Expansion Valves are compatible with R454A refrigerant. SBFVE, ERVE and OVE Expansion Valves are compatible with R454C and R455A refrigerants. Base models include nozzles sized for 100°F liquid, shipped loose.
Distributor Nozzles & Expansion Valves - Medium Temperature Electric Defrost
6 FPI Models
| Model No. | Nozzle @ Liq. Temp. | TXV^ @ Liq. Temp. | EEV @ Liq. Temp. | No. of Circuits | |||
|---|---|---|---|---|---|---|---|
| 50°F | 100°F | 50°F | 100°F | 50°F | 100°F | ||
| CAM6D218*DA | 3/4, TYPE L | 2, TYPE L | SBFTE-A-C | SBFTE-B-C | SER-B | SER-B | 6 |
| CAM6D267*DA | 1, TYPE L | 2-1/2, TYPE L | SBFTE-B-C | SBFTE-B-C | SER-B | SER-B | 6 |
| CAM6D335*DA | 1, TYPE L | 3, TYPE L | SBFTE-B-C | SBFTE-C-C | SER-B | SER-C | 8 |
| CAM6D447*DA | 1-1/2, TYPE L | 4, TYPE L | SBFTE-B-C | SBFTE-C-C | SER-C | SER-C | 9 |
| CAM6D539*DA | 2, TYPE G | 5, TYPE G | SBFTE-C-C | SBFTE-C-C | SER-C | SER-C | 12 |
| CAM6D667*DA | 2-1/2, TYPE G | 6, TYPE G | SBFTE-C-C | ERTE-8-C | SER-C | SER-C | 12 |
| CAM6D799*DA | 3, TYPE G | 10, TYPE G | SBFTE-C-C | ERTE-8-C | SER-C | SER-DS | 16 |
| CAM6D887*DA | 3, TYPE G | 10, TYPE G | ERTE-8-C | ERTE-10-C | SER-C | SER-DS | 16 |
| CAM6D989*DA | 4, TYPE G | 10, TYPE G | ERTE-8-C | ERTE-10-C | SER-C | SER-DS | 24 |
| CAM6D218*DA | 3/4, TYPE L | 2, TYPE L | SBFVE-B-C | SBFVE-B-C | SER-B | SER-B | 6 |
| CAM6D267*DA | 1, TYPE L | 2-1/2, TYPE L | SBFVE-B-C | SBFVE-C-C | SER-B | SER-C | 6 |
| CAM6D335*DA | 1, TYPE L | 3, TYPE L | SBFVE-B-C | SBFVE-C-C | SER-C | SER-C | 8 |
| CAM6D447*DA | 1-1/2, TYPE L | 4, TYPE L | SBFVE-C-C | SBFVE-C-C | SER-C | SER-C | 9 |
| CAM6D539*DA | 2, TYPE G | 5, TYPE G | SBFVE-C-C | OVE-10-C | SER-C | SER-C | 12 |
| CAM6D667*DA | 2-1/2, TYPE G | 6, TYPE G | SBFVE-C-C | OVE-10-C | SER-C | SER-DS | 12 |
| CAM6D799*DA | 3, TYPE G | 10, TYPE G | ERVE-8-C | OVE-10-C | SER-C | SER-DS | 16 |
| CAM6D887*DA | 3, TYPE G | 10, TYPE G | ERVE-8-C | OVE-15-C | SER-DS | SER-DS | 16 |
| CAM6D989*DA | 4, TYPE G | 10, TYPE G | ERVE-8-C | OVE-15-C | SER-DS | SER-DS | 24 |
| CAM6D218*DA | 3/4, TYPE L | 2, TYPE L | SBFVE-B-C | SBFVE-B-C | SER-B | SER-B | 6 |
| CAM6D267*DA | 1, TYPE L | 2-1/2, TYPE L | SBFVE-B-C | SBFVE-C-C | SER-B | SER-C | 6 |
| CAM6D335*DA | 1, TYPE L | 3, TYPE L | SBFVE-B-C | SBFVE-C-C | SER-C | SER-C | 8 |
| CAM6D447*DA | 1-1/2, TYPE L | 4, TYPE L | SBFVE-C-C | SBFVE-C-C | SER-C | SER-C | 9 |
| CAM6D539*DA | 2, TYPE G | 5, TYPE G | SBFVE-C-C | OVE-10-C | SER-C | SER-C | 12 |
| CAM6D667*DA | 2-1/2, TYPE G | 6, TYPE G | SBFVE-C-C | OVE-10-C | SER-C | SER-DS | 12 |
| CAM6D799*DA | 3, TYPE G | 10, TYPE G | ERVE-8-C | OVE-10-C | SER-C | SER-DS | 16 |
| CAM6D887*DA | 3, TYPE G | 10, TYPE G | ERVE-8-C | OVE-15-C | SER-DS | SER-DS | 16 |
| CAM6D989*DA | 4, TYPE G | 10, TYPE G | ERVE-8-C | OVE-15-C | SER-DS | SER-DS | 24 |
Notes: The Distributor lines are 3/16" or 1/4" diameter and 27" long. Asterisk represents a variable character based on voltage ordered. Expansion valve selections are based on +25°F Suction Temp and 8°F to 12°F evaporator TD. Contact factory for operating conditions outside this range. SBFTE and ERTE Expansion Valves are compatible with R454A refrigerant. SBFVE, ERVE and OVE Expansion Valves are compatible with R454C and R455A refrigerants. Base models include nozzles sized for 100°F liquid, shipped loose.
Loose Components Required for A2L Isolation Control - Air Defrost
Amin (MINIMUM ALLOWABLE ROOM SIZE) VALUES // AIR DEFROST // 6 FPI
| Model No. | Amin Values (Ft²) | Loose SSOV (solenoid shut off valve) Isolation Valve @ Liquid Temp | Loose CSOV (check shut off valve) Isolation CV | Size | Description | |||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 10 Ft Line Run | 20 Ft Line Run | 30 Ft Line Run | 40 Ft Line Run | 50 Ft Line Run | Size | 50°F | 100°F | Size | ||||
| CAM6A219*DA | 42 | 54 | 66 | 77 | 89 | 1/2" | SSOV6S140 | SSOV6S140 | 1-1/8" | CSOV-9S | ||
| CAM6A268*DA | 47 | 58 | 70 | 81 | 93 | 1/2" | SSOV6S140 | SSOV6S140 | 1-1/8" | CSOV-9S | ||
| CAM6A336*DA | 47 | 58 | 70 | 82 | 93 | 1/2" | SSOV6S140 | SSOV6S140 | 1-1/8" | CSOV-9S | ||
| CAM6A448*DA | 55 | 67 | 79 | 92 | 104 | 1/2" | SSOV6S140 | SSOV6S140 | 1-3/8" | CSOV-11S | ||
| CAM6A540*DA | 69 | 88 | 106 | 124 | 143 | 5/8" | SSOV10S150 | SSOV10S150 | 1-3/8" | CSOV-11S | ||
| CAM6A668*DA | 74 | 92 | 111 | 129 | 147 | 5/8" | SSOV10S150 | SSOV10S150 | 1-3/8" | CSOV-11S | ||
| CAM6A800*DA | 86 | 105 | 124 | 143 | 162 | 5/8" | SSOV10S150 | SSOV10S150 | 1-5/8" | CSOV-13S | ||
| CAM6A888*DA | 112 | 148 | 183 | 219 | 254 | 7/8" | SSOV19S270 | SSOV19S270 | 1-5/8" | CSOV-13S | ||
| CAM6A990*DA | 119 | 155 | 190 | 226 | 261 | 7/8" | SSOV19S270 | SSOV19S270 | 1-5/8" | CSOV-13S | ||
| CAM6A219*DA | 41 | 52 | 63 | 74 | 86 | 1/2" | SSOV6S140 | SSOV6S140 | 1-1/8" | CSOV-9S | ||
| CAM6A268*DA | 45 | 56 | 67 | 78 | 90 | 1/2" | SSOV6S140 | SSOV6S140 | 1-1/8" | CSOV-9S | ||
| CAM6A336*DA | 45 | 56 | 68 | 79 | 90 | 1/2" | SSOV6S140 | SSOV6S140 | 1-1/8" | CSOV-9S | ||
| CAM6A448*DA | 53 | 65 | 77 | 88 | 100 | 1/2" | SSOV6S140 | SSOV6S140 | 1-3/8" | CSOV-11S | ||
| CAM6A540*DA | 67 | 85 | 102 | 120 | 138 | 5/8" | SSOV10S150 | SSOV10S150 | 1-3/8" | CSOV-11S | ||
| CAM6A668*DA | 71 | 89 | 107 | 125 | 143 | 5/8" | SSOV10S150 | SSOV10S150 | 1-3/8" | CSOV-11S | ||
| CAM6A800*DA | 83 | 101 | 120 | 138 | 157 | 5/8" | SSOV10S150 | SSOV10S150 | 1-5/8" | CSOV-13S | ||
| CAM6A888*DA | 108 | 143 | 177 | 212 | 246 | 7/8" | SSOV19S270 | SSOV19S270 | 1-5/8" | CSOV-13S | ||
| CAM6A990*DA | 115 | 150 | 184 | 219 | 253 | 7/8" | SSOV19S270 | SSOV19S270 | 1-5/8" | CSOV-13S | ||
| CAM6A219*DA | 37 | 48 | 58 | 68 | 78 | 1/2" | SSOV6S140 | SSOV6S140 | 1-1/8" | CSOV-9S | ||
| CAM6A268*DA | 41 | 51 | 61 | 72 | 82 | 1/2" | SSOV6S140 | SSOV6S140 | 1-1/8" | CSOV-9S | ||
| CAM6A336*DA | 41 | 52 | 62 | 72 | 82 | 1/2" | SSOV6S140 | SSOV6S140 | 1-1/8" | CSOV-9S | ||
| CAM6A448*DA | 49 | 59 | 70 | 81 | 91 | 1/2" | SSOV6S140 | SSOV6S140 | 1-3/8" | CSOV-11S | ||
| CAM6A540*DA | 61 | 77 | 94 | 110 | 126 | 5/8" | SSOV10S150 | SSOV10S150 | 1-3/8" | CSOV-11S | ||
| CAM6A668*DA | 65 | 81 | 98 | 114 | 130 | 5/8" | SSOV10S150 | SSOV10S150 | 1-3/8" | CSOV-11S | ||
| CAM6A800*DA | 76 | 93 | 109 | 126 | 143 | 5/8" | SSOV10S150 | SSOV10S150 | 1-5/8" | CSOV-13S | ||
| CAM6A888*DA | 99 | 130 | 162 | 193 | 225 | 7/8" | SSOV19S270 | SSOV19S270 | 1-5/8" | CSOV-13S | ||
| CAM6A990*DA | 105 | 137 | 168 | 200 | 231 | 7/8" | SSOV19S270 | SSOV19S270 | 1-5/8" | CSOV-13S | ||
Notes: Solenoid Shut Off Valves operate as double duty isolation/liquid line solenoid valves and are required to ship loose and be installed in the field, outside the refrigerated space. SSOV/CSOV Selection Criteria: Maximum 10 Foot Line Rise, 100 Foot Line Run, 1:1 Condensing Unit/Evaporator. Amin values calculated using operating conditions included in UL 60335-2-89 101.DVU.1.2 and standard connection sizes (liquid and suction). Amin values provided for 10 Ft, 20 Ft, 30 Ft, 40 Ft and 50 Ft line lengths. Amin values intended to determine compliance with UL 2-89 and is NOT for charging calculations.
Distributor Nozzles & Expansion Valves - Low Temperature Electric Defrost
6 FPI Models
| Model No. | Nozzle @ Liq. Temp. | TXV^ @ Liq. Temp. | EEV @ Liq. Temp. | No. of Circuits | |||
|---|---|---|---|---|---|---|---|
| 50°F | 100°F | 50°F | 100°F | 50°F | 100°F | ||
| CAM6E181*DA | 1-1/2, TYPE L | 3, TYPE L | SBFTE-B-Z | SBFTE-B-Z | SER-A | SER-B | 6 |
| CAM6E217*DA | 1-1/2, TYPE L | 3, TYPE L | SBFTE-B-Z | SBFTE-C-Z | SER-B | SER-B | 8 |
| CAM6E371*DA | 2-1/2, TYPE G | 6, TYPE G | SBFTE-C-Z | SBFTE-C-Z | SER-B | SER-C | 12 |
| CAM6E446*DA | 3, TYPE G | 6, TYPE G | SBFTE-C-Z | ERTE-8-Z | SER-C | SER-C | 16 |
| CAM6E557*DA | 4, TYPE G | 10, TYPE G | ERTE-8-Z | OTE-10-Z | SER-C | SER-C | 18 |
| CAM6E669*DA | 4, TYPE G | 10, TYPE G | ERTE-8-Z | OTE-15-Z | SER-C | SER-C | 24 |
| CAM6E741*DA | 5, TYPE G | 15, TYPE G | OTE-10-Z | OTE-15-Z | SER-C | SER-DS | 18 |
| CAM6E890*DA | 6, TYPE G | 15, TYPE G | OTE-15-Z | OTE-20-Z | SER-C | SER-DS | 24 |
| CAM6E181*DA | 1-1/2, TYPE L | 3, TYPE L | SBFVE-B-Z | SBFVE-C-Z | SER-B | SER-B | 6 |
| CAM6E217*DA | 1-1/2, TYPE L | 3, TYPE L | SBFVE-B-Z | SBFVE-C-Z | SER-B | SER-C | 8 |
| CAM6E371*DA | 2-1/2, TYPE G | 6, TYPE G | SBFVE-C-Z | OVE-10-Z | SER-C | SER-C | 12 |
| CAM6E446*DA | 3, TYPE G | 6, TYPE G | ERVE-8-Z | OVE-10-Z | SER-C | SER-C | 16 |
| CAM6E557*DA | 4, TYPE G | 10, TYPE G | ERVE-8-Z | OVE-15-Z | SER-C | SER-C | 18 |
| CAM6E669*DA | 4, TYPE G | 10, TYPE G | OVE-15-Z | OVE-20-Z | SER-C | SER-DS | 24 |
| CAM6E741*DA | 5, TYPE G | 15, TYPE G | OVE-15-Z | OVE-20-Z | SER-C | SER-DS | 18 |
| CAM6E890*DA | 6, TYPE G | 15, TYPE G | OVE-15-Z | OVE-20-Z | SER-DS | SER-DS | 24 |
| CAM6E181*DA | 1-1/2, TYPE L | 3, TYPE L | SBFVE-B-Z | SBFVE-C-Z | SER-B | SER-B | 6 |
| CAM6E217*DA | 1-1/2, TYPE L | 3, TYPE L | SBFVE-B-Z | SBFVE-C-Z | SER-B | SER-C | 8 |
| CAM6E371*DA | 2-1/2, TYPE G | 6, TYPE G | SBFVE-C-Z | OVE-10-Z | SER-C | SER-C | 12 |
| CAM6E446*DA | 3, TYPE G | 6, TYPE G | ERVE-8-Z | OVE-10-Z | SER-C | SER-C | 16 |
| CAM6E557*DA | 4, TYPE G | 10, TYPE G | ERVE-8-Z | OVE-15-Z | SER-C | SER-C | 18 |
| CAM6E669*DA | 4, TYPE G | 10, TYPE G | OVE-15-Z | OVE-20-Z | SER-C | SER-DS | 24 |
| CAM6E741*DA | 5, TYPE G | 15, TYPE G | OVE-15-Z | OVE-20-Z | SER-C | SER-DS | 18 |
| CAM6E890*DA | 6, TYPE G | 15, TYPE G | OVE-15-Z | OVE-20-Z | SER-DS | SER-DS | 24 |
Notes: The Distributor lines are 3/16" or 1/4" diameter and 27" long. Asterisk represents a variable character based on voltage ordered. Expansion valve selections are based on -20°F Suction Temp and 8°F to 12°F evaporator TD. Contact factory for operating conditions outside this range. Do not use pressure limiting TXV's when the condensing unit includes a CPR valve. SBFTE, ERTE and OTE Expansion Valves are compatible with R454A refrigerant. SBFVE, ERVE and OVE Expansion Valves are compatible with R454C and R455A refrigerants. Base models include nozzles sized for 100°F liquid, shipped loose.
Loose Components Required for A2L Isolation Control - Low Temperature Electric Defrost
Amin (MINIMUM ALLOWABLE ROOM SIZE) VALUES // LOW TEMPERATURE ELECTRIC DEFROST // 6 FPI
| Model No. | Amin Values (Ft²) | Loose SSOV (solenoid shut off valve) Isolation Valve @ Liquid Temp | Loose CSOV (check shut off valve) Isolation CV | Size | Description | |||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 10 Ft Line Run | 20 Ft Line Run | 30 Ft Line Run | 40 Ft Line Run | 50 Ft Line Run | Size | 50°F | 100°F | Size | ||||
| CAM6E181*DA | 42 | 54 | 65 | 76 | 87 | 1/2" | SSOV6S140 | SSOV6S140 | 1-3/8" | CSOV-11S | ||
| CAM6E217*DA | 46 | 58 | 69 | 80 | 91 | 1/2" | SSOV6S140 | SSOV6S140 | 1-3/8" | CSOV-11S | ||
| CAM6E371*DA | 56 | 68 | 79 | 91 | 102 | 1/2" | SSOV6S140 | SSOV6S140 | 1-5/8" | CSOV-13S | ||
| CAM6E446*DA | 71 | 89 | 108 | 127 | 146 | 5/8" | SSOV10S150 | SSOV10S150 | 2-1/8" | CSOV-17S | ||
| CAM6E557*DA | 78 | 97 | 115 | 134 | 153 | 5/8" | SSOV10S150 | SSOV10S150 | 2-1/8" | CSOV-17S | ||
| CAM6E669*DA | 89 | 108 | 126 | 145 | 164 | 5/8" | SSOV10S150 | SSOV10S150 | 2-1/8" | CSOV-17S | ||
| CAM6E741*DA | 92 | 111 | 130 | 148 | 167 | 5/8" | SSOV10S150 | SSOV10S150 | 2-1/8" | CSOV-17S | ||
| CAM6E890*DA | 116 | 153 | 189 | 225 | 261 | 7/8" | SSOV19S270 | SSOV19S270 | 2-5/8" | CSOV-21S | ||
| CAM6E181*DA | 41 | 52 | 63 | 74 | 85 | 1/2" | SSOV6S140 | SSOV6S140 | 1-3/8" | CSOV-11S | ||
| CAM6E217*DA | 45 | 56 | 67 | 78 | 88 | 1/2" | SSOV6S140 | SSOV6S140 | 1-3/8" | CSOV-11S | ||
| CAM6E371*DA | 54 | 65 | 77 | 88 | 99 | 1/2" | SSOV6S140 | SSOV6S140 | 1-5/8" | CSOV-13S | ||
| CAM6E446*DA | 68 | 87 | 105 | 123 | 141 | 5/8" | SSOV10S150 | SSOV10S150 | 2-1/8" | CSOV-17S | ||
| CAM6E557*DA | 75 | 94 | 112 | 130 | 148 | 5/8" | SSOV10S150 | SSOV10S150 | 2-1/8" | CSOV-17S | ||
| CAM6E669*DA | 86 | 104 | 122 | 140 | 158 | 5/8" | SSOV10S150 | SSOV10S150 | 2-1/8" | CSOV-17S | ||
| CAM6E741*DA | 89 | 107 | 125 | 144 | 162 | 5/8" | SSOV10S150 | SSOV10S150 | 2-1/8" | CSOV-17S | ||
| CAM6E890*DA | 113 | 148 | 183 | 218 | 253 | 7/8" | SSOV19S270 | SSOV19S270 | 2-5/8" | CSOV-21S | ||
| CAM6E181*DA | 37 | 47 | 57 | 67 | 77 | 1/2" | SSOV6S140 | SSOV6S140 | 1-3/8" | CSOV-11S | ||
| CAM6E217*DA | 41 | 51 | 61 | 71 | 81 | 1/2" | SSOV6S140 | SSOV6S140 | 1-3/8" | CSOV-11S | ||
| CAM6E371*DA | 50 | 60 | 70 | 80 | 90 | 1/2" | SSOV6S140 | SSOV6S140 | 1-5/8" | CSOV-13S | ||
| CAM6E446*DA | 62 | 79 | 95 | 112 | 128 | 5/8" | SSOV10S150 | SSOV10S150 | 2-1/8" | CSOV-17S | ||
| CAM6E557*DA | 69 | 85 | 102 | 118 | 135 | 5/8" | SSOV10S150 | SSOV10S150 | 2-1/8" | CSOV-17S | ||
| CAM6E669*DA | 79 | 95 | 112 | 128 | 145 | 5/8" | SSOV10S150 | SSOV10S150 | 2-1/8" | CSOV-17S | ||
| CAM6E741*DA | 81 | 98 | 114 | 131 | 147 | 5/8" | SSOV10S150 | SSOV10S150 | 2-1/8" | CSOV-17S | ||
| CAM6E890*DA | 103 | 135 | 167 | 199 | 231 | 7/8" | SSOV19S270 | SSOV19S270 | 2-5/8" | CSOV-21S | ||
Notes: Solenoid Shut Off Valves operate as double duty isolation/liquid line solenoid valves and are required to ship loose and be installed in the field, outside the refrigerated space. SSOV/CSOV Selection Criteria: Maximum 10 Foot Line Rise, 100 Foot Line Run, 1:1 Condensing Unit/Evaporator. Amin values calculated using operating conditions included in UL 60335-2-89 101.DVU.1.2 and standard connection sizes (liquid and suction). Amin values provided for 10 Ft, 20 Ft, 30 Ft, 40 Ft and 50 Ft line lengths. Amin values intended to determine compliance with UL 2-89 and is NOT for charging calculations.
Distributor Nozzles & Expansion Valves - Low Temperature Electric Defrost
4 FPI Models
| Model No. | Nozzle @ Liq. Temp. | TXV^ @ Liq. Temp. | EEV @ Liq. Temp. | No. of Circuits | |||
|---|---|---|---|---|---|---|---|
| 50°F | 100°F | 50°F | 100°F | 50°F | 100°F | ||
| CAM4E129*DA | 1, TYPE L | 2, TYPE L | SBFTE-A-Z | SBFTE-B-Z | SER-A | SER-A | 4 |
| CAM4E168*DA | 1, TYPE L | 2, TYPE L | SBFTE-B-Z | SBFTE-B-Z | SER-A | SER-B | 6 |
| CAM4E271*DA | 2, TYPE G | 4, TYPE G | SBFTE-B-Z | SBFTE-C-Z | SER-B | SER-B | 9 |
| CAM4E340*DA | 2-1/2, TYPE G | 4, TYPE G | SBFTE-C-Z | SBFTE-C-Z | SER-B | SER-C | 12 |
| CAM4E398*DA | 2-1/2, TYPE G | 6, TYPE G | SBFTE-C-Z | ERTE-8-Z | SER-C | SER-C | 12 |
| CAM4E495*DA | 4, TYPE G | 10, TYPE G | SBFTE-C-Z | ERTE-8-Z | SER-C | SER-C | 16 |
| CAM4E529*DA | 4, TYPE G | 10, TYPE G | SBFTE-C-Z | ERTE-8-Z | SER-C | SER-C | 18 |
| CAM4E658*DA | 5, TYPE G | 10, TYPE G | ERTE-8-Z | OTE-15-Z | SER-C | SER-C | 24 |
| CAM4E129*DA | 1, TYPE L | 2, TYPE L | SBFVE-B-Z | SBFVE-B-Z | SER-A | SER-B | 4 |
| CAM4E168*DA | 1, TYPE L | 2, TYPE L | SBFVE-B-Z | SBFVE-C-Z | SER-A | SER-B | 6 |
| CAM4E271*DA | 2, TYPE G | 4, TYPE G | SBFVE-C-Z | SBFVE-C-Z | SER-B | SER-C | 9 |
| CAM4E340*DA | 2-1/2, TYPE G | 4, TYPE G | SBFVE-C-Z | OVE-10-Z | SER-C | SER-C | 12 |
| CAM4E398*DA | 2-1/2, TYPE G | 6, TYPE G | SBFVE-C-Z | OVE-10-Z | SER-C | SER-C | 12 |
| CAM4E495*DA | 4, TYPE G | 10, TYPE G | ERVE-8-Z | OVE-10-Z | SER-C | SER-C | 16 |
| CAM4E529*DA | 4, TYPE G | 10, TYPE G | ERVE-8-Z | OVE-15-Z | SER-C | SER-C | 18 |
| CAM4E658*DA | 5, TYPE G | 10, TYPE G | OVE-10-Z | OVE-20-Z | SER-C | SER-DS | 24 |
| CAM4E129*DA | 1, TYPE L | 2, TYPE L | SBFVE-B-Z | SBFVE-B-Z | SER-A | SER-B | 4 |
| CAM4E168*DA | 1, TYPE L | 2, TYPE L | SBFVE-B-Z | SBFVE-C-Z | SER-A | SER-B | 6 |
| CAM4E271*DA | 2, TYPE G | 4, TYPE G | SBFVE-C-Z | SBFVE-C-Z | SER-B | SER-C | 9 |
| CAM4E340*DA | 2-1/2, TYPE G | 4, TYPE G | SBFVE-C-Z | OVE-10-Z | SER-C | SER-C | 12 |
| CAM4E398*DA | 2-1/2, TYPE G | 6, TYPE G | SBFVE-C-Z | OVE-10-Z | SER-C | SER-C | 12 |
| CAM4E495*DA | 4, TYPE G | 10, TYPE G | ERVE-8-Z | OVE-10-Z | SER-C | SER-C | 16 |
| CAM4E529*DA | 4, TYPE G | 10, TYPE G | ERVE-8-Z | OVE-15-Z | SER-C | SER-C | 18 |
| CAM4E658*DA | 5, TYPE G | 10, TYPE G | OVE-10-Z | OVE-20-Z | SER-C | SER-DS | 24 |
Notes: The Distributor lines are 3/16" or 1/4" diameter and 27" long. Asterisk represents a variable character based on voltage ordered. Expansion valve selections are based on -20°F Suction Temp and 8°F to 12°F evaporator TD. Contact factory for operating conditions outside this range. Do not use pressure limiting TXV's when the condensing unit includes a CPR valve. SBFTE, ERTE and OTE Expansion Valves are compatible with R454A refrigerant. SBFVE, ERVE and OVE Expansion Valves are compatible with R454C and R455A refrigerants. Base models include nozzles sized for 100°F liquid, shipped loose.
Loose Components Required for A2L Isolation Control - Medium Temperature Electric Defrost
Amin (MINIMUM ALLOWABLE ROOM SIZE) VALUES // MEDIUM TEMPERATURE ELECTRIC DEFROST // 6 FPI
| Model No. | Amin Values (Ft²) | Loose SSOV (solenoid shut off valve) Isolation Valve @ Liquid Temp | Loose CSOV (check shut off valve) Isolation CV | Size | Description | |||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 10 Ft Line Run | 20 Ft Line Run | 30 Ft Line Run | 40 Ft Line Run | 50 Ft Line Run | Size | 50°F | 100°F | Size | ||||
| CAM6D218*DA | 42 | 54 | 66 | 77 | 89 | 1/2" | SSOV6S140 | SSOV6S140 | 1-1/8" | CSOV-9S | ||
| CAM6D267*DA | 47 | 58 | 70 | 81 | 93 | 1/2" | SSOV6S140 | SSOV6S140 | 1-1/8" | CSOV-9S | ||
| CAM6D335*DA | 47 | 58 | 70 | 82 | 93 | 1/2" | SSOV6S140 | SSOV6S140 | 1-1/8" | CSOV-9S | ||
| CAM6D447*DA | 55 | 67 | 79 | 92 | 104 | 1/2" | SSOV6S140 | SSOV6S140 | 1-3/8" | CSOV-11S | ||
| CAM6D539*DA | 69 | 88 | 106 | 124 | 143 | 5/8" | SSOV10S150 | SSOV10S150 | 1-3/8" | CSOV-11S | ||
| CAM6D667*DA | 74 | 92 | 111 | 129 | 147 | 5/8" | SSOV10S150 | SSOV10S150 | 1-3/8" | CSOV-11S | ||
| CAM6D799*DA | 86 | 105 | 124 | 143 | 162 | 5/8" | SSOV10S150 | SSOV10S150 | 1-5/8" | CSOV-13S | ||
| CAM6D887*DA | 112 | 148 | 183 | 219 | 254 | 7/8" | SSOV19S270 | SSOV19S270 | 1-5/8" | CSOV-13S | ||
| CAM6D989*DA | 119 | 155 | 190 | 226 | 261 | 7/8" | SSOV19S270 | SSOV19S270 | 1-5/8" | CSOV-13S | ||
| CAM6D218*DA | 41 | 52 | 63 | 74 | 86 | 1/2" | SSOV6S140 | SSOV6S140 | 1-1/8" | CSOV-9S | ||
| CAM6D267*DA | 45 | 56 | 67 | 78 | 90 | 1/2" | SSOV6S140 | SSOV6S140 | 1-1/8" | CSOV-9S | ||
| CAM6D335*DA | 45 | 56 | 68 | 79 | 90 | 1/2" | SSOV6S140 | SSOV6S140 | 1-1/8" | CSOV-9S | ||
| CAM6D447*DA | 53 | 65 | 77 | 88 | 100 | 1/2" | SSOV6S140 | SSOV6S140 | 1-3/8" | CSOV-11S | ||
| CAM6D539*DA | 67 | 85 | 102 | 120 | 138 | 5/8" | SSOV10S150 | SSOV10S150 | 1-3/8" | CSOV-11S | ||
| CAM6D667*DA | 71 | 89 | 107 | 125 | 143 | 5/8" | SSOV10S150 | SSOV10S150 | 1-3/8" | CSOV-11S | ||
| CAM6D799*DA | 83 | 101 | 120 | 138 | 157 | 5/8" | SSOV10S150 | SSOV10S150 | 1-5/8" | CSOV-13S | ||
| CAM6D887*DA | 108 | 143 | 177 | 212 | 246 | 7/8" | SSOV19S270 | SSOV19S270 | 1-5/8" | CSOV-13S | ||
| CAM6D989*DA | 115 | 150 | 184 | 219 | 253 | 7/8" | SSOV19S270 | SSOV19S270 | 1-5/8" | CSOV-13S | ||
| CAM6D218*DA | 37 | 48 | 58 | 68 | 78 | 1/2" | SSOV6S140 | SSOV6S140 | 1-1/8" | CSOV-9S | ||
| CAM6D267*DA | 41 | 51 | 61 | 72 | 82 | 1/2" | SSOV6S140 | SSOV6S140 | 1-1/8" | CSOV-9S | ||
| CAM6D335*DA | 41 | 52 | 62 | 72 | 82 | 1/2" | SSOV6S140 | SSOV6S140 | 1-1/8" | CSOV-9S | ||
| CAM6D447*DA | 49 | 59 | 70 | 81 | 91 | 1/2" | SSOV6S140 | SSOV6S140 | 1-3/8" | CSOV-11S | ||
| CAM6D539*DA | 61 | 77 | 94 | 110 | 126 | 5/8" | SSOV10S150 | SSOV10S150 | 1-3/8" | CSOV-11S | ||
| CAM6D667*DA | 65 | 81 | 98 | 114 | 130 | 5/8" | SSOV10S150 | SSOV10S150 | 1-3/8" | CSOV-11S | ||
| CAM6D799*DA | 76 | 93 | 109 | 126 | 143 | 5/8" | SSOV10S150 | SSOV10S150 | 1-5/8" | CSOV-13S | ||
| CAM6D887*DA | 99 | 130 | 162 | 193 | 225 | 7/8" | SSOV19S270 | SSOV19S270 | 1-5/8" | CSOV-13S | ||
| CAM6D989*DA | 105 | 137 | 168 | 200 | 231 | 7/8" | SSOV19S270 | SSOV19S270 | 1-5/8" | CSOV-13S | ||
Notes: Solenoid Shut Off Valves operate as double duty isolation/liquid line solenoid valves and are required to ship loose and be installed in the field, outside the refrigerated space. SSOV/CSOV Selection Criteria: Maximum 10 Foot Line Rise, 100 Foot Line Run, 1:1 Condensing Unit/Evaporator. Amin values calculated using operating conditions included in UL 60335-2-89 101.DVU.1.2 and standard connection sizes (liquid and suction). Amin values provided for 10 Ft, 20 Ft, 30 Ft, 40 Ft and 50 Ft line lengths. Amin values intended to determine compliance with UL 2-89 and is NOT for charging calculations.
Loose Components Required for A2L Isolation Control - Low Temperature Electric Defrost
Amin (MINIMUM ALLOWABLE ROOM SIZE) VALUES // LOW TEMPERATURE ELECTRIC DEFROST // 4 FPI
| Model No. | Amin Values (Ft²) | Loose SSOV (solenoid shut off valve) Isolation Valve @ Liquid Temp | Loose CSOV (check shut off valve) Isolation CV | Size | Description | |||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 10 Ft Line Run | 20 Ft Line Run | 30 Ft Line Run | 40 Ft Line Run | 50 Ft Line Run | Size | 50°F | 100°F | Size | ||||
| CAM4E129*DA | 42 | 53 | 64 | 75 | 86 | 1/2" | SSOV6S140 | SSOV6S140 | 1-1/8" | CSOV-9S | ||
| CAM4E168*DA | 46 | 58 | 69 | 80 | 91 | 1/2" | SSOV6S140 | SSOV6S140 | 1-3/8" | CSOV-11S | ||
| CAM4E271*DA | 55 | 66 | 78 | 89 | 101 | 1/2" | SSOV6S140 | SSOV6S140 | 1-5/8" | CSOV-13S | ||
| CAM4E340*DA | 62 | 73 | 85 | 97 | 108 | 1/2" | SSOV6S140 | SSOV6S140 | 1-5/8" | CSOV-13S | ||
| CAM4E398*DA | 67 | 80 | 92 | 105 | 117 | 1/2" | SSOV6S140 | SSOV6S140 | 2-1/8" | CSOV-17S | ||
| CAM4E495*DA | 85 | 103 | 122 | 141 | 159 | 5/8" | SSOV10S150 | SSOV10S150 | 2-1/8" | CSOV-17S | ||
| CAM4E529*DA | 92 | 111 | 130 | 148 | 167 | 5/8" | SSOV10S150 | SSOV10S150 | 2-1/8" | CSOV-17S | ||
| CAM4E658*DA | 103 | 119 | 137 | 155 | 174 | 5/8" | SSOV10S150 | SSOV10S150 | 2-1/8" | CSOV-17S | ||
| CAM4E129*DA | 41 | 51 | 62 | 73 | 83 | 1/2" | SSOV6S140 | SSOV6S140 | 1-1/8" | CSOV-9S | ||
| CAM4E168*DA | 45 | 56 | 67 | 77 | 88 | 1/2" | SSOV6S140 | SSOV6S140 | 1-3/8" | CSOV-11S | ||
| CAM4E271*DA | 53 | 64 | 75 | 86 | 97 | 1/2" | SSOV6S140 | SSOV6S140 | 1-5/8" | CSOV-13S | ||
| CAM4E340*DA | 60 | 71 | 82 | 93 | 105 | 1/2" | SSOV6S140 | SSOV6S140 | 1-5/8" | CSOV-13S | ||
| CAM4E398*DA | 65 | 77 | 89 | 101 | 113 | 1/2" | SSOV6S140 | SSOV6S140 | 2-1/8" | CSOV-17S | ||
| CAM4E495*DA | 82 | 100 | 118 | 136 | 154 | 5/8" | SSOV10S150 | SSOV10S150 | 2-1/8" | CSOV-17S | ||
| CAM4E529*DA | 89 | 107 | 125 | 144 | 162 | 5/8" | SSOV10S150 | SSOV10S150 | 2-1/8" | CSOV-17S | ||
| CAM4E658*DA | 99 | 116 | 134 | 153 | 170 | 5/8" | SSOV10S150 | SSOV10S150 | 2-1/8" | CSOV-17S | ||
| CAM4E129*DA | 37 | 47 | 57 | 67 | 76 | 1/2" | SSOV6S140 | SSOV6S140 | 1-1/8" | CSOV-9S | ||
| CAM4E168*DA | 41 | 51 | 61 | 71 | 81 | 1/2" | SSOV6S140 | SSOV6S140 | 1-3/8" | CSOV-11S | ||
| CAM4E271*DA | 48 | 58 | 69 | 79 | 89 | 1/2" | SSOV6S140 | SSOV6S140 | 1-5/8" | CSOV-13S | ||
| CAM4E340*DA | 55 | 65 | 75 | 85 | 96 | 1/2" | SSOV6S140 | SSOV6S140 | 1-5/8" | CSOV-13S | ||
| CAM4E398*DA | 59 | 70 | 81 | 92 | 103 | 1/2" | SSOV6S140 | SSOV6S140 | 2-1/8" | CSOV-17S | ||
| CAM4E495*DA | 75 | 91 | 108 | 124 | 141 | 5/8" | SSOV10S150 | SSOV10S150 | 2-1/8" | CSOV-17S | ||
| CAM4E529*DA | 81 | 98 | 114 | 130 | 148 | 5/8" | SSOV10S150 | SSOV10S150 | 2-1/8" | CSOV-17S | ||
| CAM4E658*DA | 91 | 107 | 114 | 139 | 157 | 5/8" | SSOV10S150 | SSOV10S150 | 2-1/8" | CSOV-17S | ||
Notes: Solenoid Shut Off Valves operate as double duty isolation/liquid line solenoid valves and are required to ship loose and be installed in the field, outside the refrigerated space. SSOV/CSOV Selection Criteria: Maximum 10 Foot Line Rise, 100 Foot Line Run, 1:1 Condensing Unit/Evaporator. Amin values calculated using operating conditions included in UL 60335-2-89 101.DVU.1.2 and standard connection sizes (liquid and suction). Amin values provided for 10 Ft, 20 Ft, 30 Ft, 40 Ft and 50 Ft line lengths. Amin values intended to determine compliance with UL 2-89 and is NOT for charging calculations.
Physical Specifications - Air Defrost Models
| Model No. | Fan Diam. (In.) | Motor Data | Refrigerant Connections | No. of Hangers Slot | Fig. | Unit Dimensions (In.) | Approx. Unit Wt. (Lbs.) | |||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Motor Qty. | HP | RPM | Liquid Line^ | Suction^ Location | L | W | H | |||||
| CAM6A219*DA | 24 | 1 | 1/3 | 850 | 3/8 | 7/8 | 4 | 1 | 47-1/2 | 21-5/16 | 33-7/8 | 120 |
| CAM6A268*DA | 24 | 1 | 1/3 | 850 | 3/8 | 7/8 | 4 | 1 | 47-1/2 | 21-5/16 | 33-7/8 | 120 |
| CAM6A336*DA | 24 | 2 | 1/3 | 850 | 1/2 | 1-1/8 | 6 | 2 | 80-1/2 | 21-5/16 | 33-7/8 | 220 |
| CAM6A448*DA | 24 | 2 | 1/3 | 850 | 1/2 | 1-1/8 | 6 | 2 | 80-1/2 | 21-5/16 | 33-7/8 | 220 |
| CAM6A540*DA | 24 | 2 | 1/3 | 850 | 5/8 | 1-1/8 | 6 | 2 | 80-1/2 | 21-5/16 | 33-7/8 | 220 |
| CAM6A668*DA | 24 | 3 | 1/3 | 850 | 5/8 | 1-3/8 | 8 | 3 | 113-9/16 | 21-5/16 | 33-7/8 | 316 |
| CAM6A800*DA | 24 | 3 | 1/3 | 850 | 5/8 | 1-3/8 | 8 | 3 | 113-9/16 | 21-5/16 | 33-7/8 | 316 |
| CAM6A888*DA | 24 | 4 | 1/3 | 850 | 7/8 | 1-5/8 | 10 | 4 | 146-9/16 | 21-5/16 | 33-7/8 | 420 |
| CAM6A990*DA | 24 | 4 | 1/3 | 850 | 7/8 | 1-5/8 | 10 | 4 | 146-9/16 | 21-5/16 | 33-7/8 | 420 |
Medium Temperature Electric Defrost Models
| Model No. | Fan Diam. (In.) | Motor Data | Refrigerant Connections | No. of Hangers Slot | Fig. | Unit Dimensions (In.) | Approx. Unit Wt. (Lbs.) | |||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Motor Qty. | HP | RPM | Liquid Line^ | Suction^ Location | L | W | H | |||||
| CAM6D218*DA | 24 | 1 | 1/3 | 850 | 3/8 | 7/8 | 4 | 1 | 47-1/2 | 21-5/16 | 33-7/8 | 120 |
| CAM6D267*DA | 24 | 1 | 1/3 | 850 | 3/8 | 7/8 | 4 | 1 | 47-1/2 | 21-5/16 | 33-7/8 | 120 |
| CAM6D335*DA | 24 | 2 | 1/3 | 850 | 1/2 | 1-1/8 | 6 | 2 | 80-1/2 | 21-5/16 | 33-7/8 | 220 |
| CAM6D447*DA | 24 | 2 | 1/3 | 850 | 1/2 | 1-1/8 | 6 | 2 | 80-1/2 | 21-5/16 | 33-7/8 | 220 |
| CAM6D539*DA | 24 | 2 | 1/3 | 850 | 5/8 | 1-1/8 | 6 | 2 | 80-1/2 | 21-5/16 | 33-7/8 | 220 |
| CAM6D667*DA | 24 | 3 | 1/3 | 850 | 5/8 | 1-3/8 | 8 | 3 | 113-9/16 | 21-5/16 | 33-7/8 | 316 |
| CAM6D799*DA | 24 | 3 | 1/3 | 850 | 5/8 | 1-3/8 | 8 | 3 | 113-9/16 | 21-5/16 | 33-7/8 | 316 |
| CAM6D887*DA | 24 | 4 | 1/3 | 850 | 7/8 | 1-5/8 | 10 | 4 | 146-9/16 | 21-5/16 | 33-7/8 | 420 |
| CAM6D989*DA | 24 | 4 | 1/3 | 850 | 7/8 | 1-5/8 | 10 | 4 | 146-9/16 | 21-5/16 | 33-7/8 | 420 |
Notes: Asterisk represents a variable character based on voltage ordered. ^ For units with mounted TXV components, See Nozzle TXV table for distributor connection size when a TXV is field supplied. For dimensional distance between hanger slots, consult model's corresponding dimensional drawing. Hanger slots are 3/8" deep x 1" wide. Drain connection is 1-1/4" NPT for all models. For shipping dimensions and weights, see the Shipping information included with each dimensional drawing.
Physical Specifications - Low Temperature Electric Defrost Models
6 FPI Models
| Model No. RM*E/G/H | Fan Diam. (In.) | Motor Data | Refrigerant Connections | No. of Hangers Slot | Fig. | Unit Dimensions (In.) | Approx. Unit Wt. (Lbs.) | |||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Motor Qty. | HP | RPM | Liquid Line^ | Suction^ Location | L | W | H | |||||
| CAM6E181*DA | 24 | 1 | 1/3 | 850 | 3/8 | 1-1/8 | 4 | 1 | 47-1/2 | 21-5/16 | 33-7/8 | 120 |
| CAM6E217*DA | 24 | 1 | 1/3 | 850 | 3/8 | 1-1/8 | 4 | 1 | 47-1/2 | 21-5/16 | 33-7/8 | 120 |
| CAM6E371*DA | 24 | 2 | 1/3 | 850 | 1/2 | 1-5/8 | 6 | 2 | 80-1/2 | 21-5/16 | 33-7/8 | 220 |
| CAM6E446*DA | 24 | 2 | 1/3 | 850 | 5/8 | 1-5/8 | 6 | 2 | 80-1/2 | 21-5/16 | 33-7/8 | 220 |
| CAM6E557*DA | 24 | 3 | 1/3 | 850 | 5/8 | 2-1/8 | 8 | 3 | 113-9/16 | 21-5/16 | 33-7/8 | 320 |
| CAM6E669*DA | 24 | 3 | 1/3 | 850 | 5/8 | 2-1/8 | 8 | 3 | 113-9/16 | 21-5/16 | 33-7/8 | 320 |
| CAM6E741*DA | 24 | 4 | 1/3 | 850 | 5/8 | 2-1/8 | 10 | 4 | 146-9/16 | 21-5/16 | 33-7/8 | 420 |
| CAM6E890*DA | 24 | 4 | 1/3 | 850 | 7/8 | 2-5/8 | 10 | 4 | 146-9/16 | 21-5/16 | 33-7/8 | 420 |
4 FPI Models
| Model No. | Fan Diam. (In.) | Motor Data | Refrigerant Connections | No. of Hangers Slot | Fig. | Unit Dimensions (In.) | Approx. Unit Wt. (Lbs.) | |||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Motor Qty. | HP | RPM | Liquid Line^ | Suction^ Location | L | W | H | |||||
| CAM4E129*DA | 24 | 1 | 1/3 | 850 | 3/8 | 1-1/8 | 4 | 1 | 47-1/2 | 21-5/16 | 33-7/8 | 120 |
| CAM4E168*DA | 24 | 1 | 1/3 | 850 | 3/8 | 1-1/8 | 4 | 1 | 47-1/2 | 21-5/16 | 33-7/8 | 120 |
| CAM4E271*DA | 24 | 2 | 1/3 | 850 | 1/2 | 1-3/8 | 6 | 2 | 80-1/2 | 21-5/16 | 33-7/8 | 220 |
| CAM4E340*DA | 24 | 2 | 1/3 | 850 | 1/2 | 1-3/8 | 6 | 2 | 80-1/2 | 21-5/16 | 33-7/8 | 220 |
| CAM4E398*DA | 24 | 3 | 1/3 | 850 | 1/2 | 1-5/8 | 8 | 3 | 113-9/16 | 21-5/16 | 33-7/8 | 320 |
| CAM4E495*DA | 24 | 3 | 1/3 | 850 | 5/8 | 1-5/8 | 8 | 3 | 113-9/16 | 21-5/16 | 33-7/8 | 320 |
| CAM4E529*DA | 24 | 4 | 1/3 | 850 | 5/8 | 2-1/8 | 10 | 4 | 146-9/16 | 21-5/16 | 33-7/8 | 420 |
| CAM4E658*DA | 24 | 4 | 1/3 | 850 | 5/8 | 2-1/8 | 10 | 4 | 146-9/16 | 21-5/16 | 33-7/8 | 420 |
Notes: Asterisk represents a variable character based on voltage ordered. ^ For units with mounted TXV components, See Nozzle TXV table for distributor connection size when a TXV is field supplied. For dimensional distance between hanger slots, consult model's corresponding dimensional drawing. Hanger slots are 3/8" deep x 1" wide. Drain connection is 1-1/4" NPT for all models. For shipping dimensions and weights, see the Shipping information included with each dimensional drawing.
Dimensional Drawings
Figure 1: Single Fan
Front View: Shows a rectangular unit with a single large fan centered on the front panel. Dimensions indicated are 47-1/2" width and 31-13/16" height. Labels point to 'LIQUID (BACK SIDE)', 'SUCTION (BACKSIDE)', '7/8 KNOCKOUT (BACKSIDE)', and 'POWER AND CONTROL PANEL'. A '1-1/4 - 11.5 NPT DRAIN FITTING' is shown at the bottom.
Side View: Depicts the unit's depth and height. Key dimensions are 18-13/16" depth, 33-7/8" height, and 3-11/32" from the bottom to the suction connection. Labels indicate 'LIQUID', 'SUCTION', and 'AIR' flow direction.
Top View: Shows the unit's width and depth. Key dimensions are 38-13/16" width and 17-13/16" depth. '3/8 X 1 MOUNTING HOLES (4)' are indicated.
Shipping Information (Figure 1): For 1 Fan: L=60", W=43-1/4", H=48-1/2", Shipping Weight=346 Lbs.
Figure 2: Two Fan
Front View: Shows a wider unit with two large fans side-by-side. Overall width is 80-1/2". Height is 31-13/16". Similar labels for liquid, suction, knockout, and control panel as Figure 1.
Side View: Identical to the single fan unit's side view, with dimensions 18-13/16" depth, 33-7/8" height, and 3-5/16" from bottom to suction.
Top View: Shows the unit's width and depth. Key dimensions are two 35-15/16" fan sections contributing to the overall width, and 17-13/16" depth. '3/8 X 1 MOUNTING HOLES (6)' are indicated.
Shipping Information (Figure 2): For 2 Fans: L=93", W=43-1/4", H=48-1/2", Shipping Weight=510 Lbs.
Figure 3: Three Fan
Front View: Shows a unit with three fans side-by-side. Overall width is 113-9/16". Height is 31-13/16". Labels for liquid, suction, knockout, and control panel are present.
Side View: Identical to previous side views: 18-13/16" depth, 33-7/8" height, 3-3/8" from bottom to suction.
Top View: Shows three fan sections with dimensions 36", 33", and 36" for the fan spacing, and 17-13/16" depth. '3/8 X 1 MOUNTING HOLES (8)' are indicated.
Shipping Information (Figure 3): For 3 Fans: L=120", W=43-1/4", H=48-1/2", Shipping Weight=673 Lbs.
Figure 4: Four Fan
Front View: Shows a unit with four fans side-by-side. Overall width is 146-9/16". Height is 31-13/16". Labels for liquid, suction, knockout, control panel, and an optional 'HOT GAS' connection are present.
Side View: Identical to previous side views: 18-13/16" depth, 33-7/8" height, 3-5/16" from bottom to suction.
Top View: Shows four fan sections with dimensions 36", 33", 33", and 36" for fan spacing, and 17-13/16" depth. '3/8 X 1 MOUNTING HOLES (10)' are indicated.
Shipping Information (Figure 4): For 4 Fans: L=160", W=43-1/4", H=48-1/2", Shipping Weight=843 Lbs.
Evaporator Application Ratings
Multiple conditions, including walk-in space temperature, relative humidity, saturated suction temperature difference, and outdoor ambient temperature, determine the application capacity of an evaporator. These factors are considered when calculating an evaporator application rating, which may be considerably higher than the net capacity value used for DOE ratings (AWEF).
The AWEF of an evaporator is calculated using dry coil capacity and daily evaporator power consumption (including fan and defrost power). Evaporator net capacity reported to the DOE database is dry coil capacity minus full power fan watts. DOE test conditions are at 10°F evaporator/SST temperature difference, less than 50% relative humidity, and 96°F liquid temperature. While these conditions create a uniform test method, they should not be used for equipment selection as they may result in oversized equipment. Published application ratings serve as a guideline for proper equipment selection, reflecting true operating conditions.
AWEF RATINGS // COOLER AND FREEZER MODELS
Cooler Models
| Base Model No. | Defrost Type | FPI | AWEF |
|---|---|---|---|
| CAM6A219*DA | Air Defrost | 6 | 9 |
| CAM6A268*DA | Air Defrost | 6 | 9 |
| CAM6A336*DA | Air Defrost | 6 | 9 |
| CAM6A448*DA | Air Defrost | 6 | 9 |
| CAM6A540*DA | Air Defrost | 6 | 9 |
| CAM6A668*DA | Air Defrost | 6 | 9 |
| CAM6A800*DA | Air Defrost | 6 | 9 |
| CAM6A888*DA | Air Defrost | 6 | 9 |
| CAM6A990*DA | Air Defrost | 6 | 9 |
| CAM6D218*DA | Med Temp Electric Defrost | 6 | 9 |
| CAM6D267*DA | Med Temp Electric Defrost | 6 | 9 |
| CAM6D335*DA | Med Temp Electric Defrost | 6 | 9 |
| CAM6D447*DA | Med Temp Electric Defrost | 6 | 9 |
| CAM6D539*DA | Med Temp Electric Defrost | 6 | 9 |
| CAM6D667*DA | Med Temp Electric Defrost | 6 | 9 |
| CAM6D799*DA | Med Temp Electric Defrost | 6 | 9 |
| CAM6D887*DA | Med Temp Electric Defrost | 6 | 9 |
| CAM6D989*DA | Med Temp Electric Defrost | 6 | 9 |
Note: Asterisk represents a variable character based on voltage ordered. The refrigeration system is designed and certified for use in walk-in cooler applications.
Freezer Models
| Base Model No. | Defrost Type | FPI | AWEF |
|---|---|---|---|
| CAM6E181*DA | Low Temp Electric Defrost | 6 | 4.15 |
| CAM6E217*DA | Low Temp Electric Defrost | 6 | 4.15 |
| CAM6E371*DA | Low Temp Electric Defrost | 6 | 4.15 |
| CAM6E446*DA | Low Temp Electric Defrost | 6 | 4.15 |
| CAM6E557*DA | Low Temp Electric Defrost | 6 | 4.15 |
| CAM6E669*DA | Low Temp Electric Defrost | 6 | 4.15 |
| CAM6E741*DA | Low Temp Electric Defrost | 6 | 4.15 |
| CAM6E890*DA | Low Temp Electric Defrost | 6 | 4.15 |
| CAM4E129*DA | Low Temp Electric Defrost | 4 | 4.15 |
| CAM4E168*DA | Low Temp Electric Defrost | 4 | 4.15 |
| CAM4E271*DA | Low Temp Electric Defrost | 4 | 4.15 |
| CAM4E340*DA | Low Temp Electric Defrost | 4 | 4.15 |
| CAM4E398*DA | Low Temp Electric Defrost | 4 | 4.15 |
| CAM4E495*DA | Low Temp Electric Defrost | 4 | 4.15 |
| CAM4E529*DA | Low Temp Electric Defrost | 4 | 4.15 |
| CAM4E658*DA | Low Temp Electric Defrost | 4 | 4.15 |
Note: Asterisk represents a variable character based on voltage ordered. The refrigeration system is designed and certified for use in walk-in freezer applications.
